Autel MAXISYS User manual
Table of Contents
General Notice .............................................................1
Introduction ................................................................ 2
Functional Description ............................................... 4
Product Troubleshooting ........................................... 7
Driver Setup ................................................................ 8
Firmware Update.......................................................10
Warranty and Service ................................................ 12
1
General Notice
The Bluetooth Diagnostic Interface has been carefully designed and tested to
comply with OBDII protocols. However, some vehicle models are not in full
compliance with these protocols for various reasons. In addition, the computer
control systems or sensors on any given vehicle may be malfunctioning.
While Autel’s testing and the experiences of the users have shown the unit to
be safe and reliable, there is an inherent risk in using any product that may
potentially affect the operation or drive-ability of your vehicle.
If you are concerned about the operation of your vehicle at any time while
using the Bluetooth Diagnostic Interface:
Pull off the roadway immediately or as soon as it is safe to do so.
Disconnect the device from the OBDII port.
Consult a licensed mechanic or automobile service center.
Contact your local distributor, or visit www.auteltech.com for issues or
concerns about the product. We maintain an active database of the feedback
we receive, and your comments can help us continuously improve the product.
2
Introduction
The Bluetooth Diagnostic Interface is a multi-brand device which comes with
the MaxiSys tool kit. It is designed to connect wirelessly with the MaxiSys
Display Tablet, as well as standalone PCs, as a vehicle communication
interface (VCI) for vehicle data transmission. Thanks to the wireless Bluetooth
technology, with which you are allowed to work freely around the vehicle.
This interface device can communicate with vehicles’ electronic control units
(ECUs), guaranteeing performance and speed that redefine multi-brand
diagnostics. The development of this interface has been focused on reducing
the communication time, and ensuring the tool is practical to use.
The MaxiSys diagnostic platform combines the VCI device and the display
tablet with technical information into a single program, ensuring quick and
simple access to the vehicle to perform comprehensive diagnostics
applications.
3
Wireless Communication
The Bluetooth Diagnostic Interface supports Bluetooth communication. It can
transmit vehicle data to the MaxiSys Display Tablet without a physical
connection. The working range of the transmitter through Bluetooth
communication is about 755 feet (about 230 m). A signal lost due to moving
out of range automatically restores itself when the display unit is brought
closer to the VCI unit.
For detailed information about VCI connection with the MaxiSys display tablet,
please refer to the MaxiSys User Manual.
USB Connectivity
The VCI device also provides a direct connection to the MaxiSys display tablet
or a PC via a USB 2.0 full-speed connection. All of the electronics are
contained in the device shell, making it a compact and rugged vehicle
communication tool.
Power Source
The Bluetooth Diagnostic Interface operates on 12-volt vehicle power, which it
receives through the vehicle data connection port. The unit powers on
whenever it is connected to an OBD II/EOBD compliant data link connector
(DLC).
It can also be powered through connection with a PC via the USB cable, so
there’s no need to connect the device to the vehicle when performing firmware
update through the PC.
4
Functional Description
The Bluetooth Diagnostic Interface device package, which includes the unit,
user manual, and a CD with driver program and update agent, comes along
with the MaxiSysTM/MaxiSys MiniTM tool kit. Please refer to the MaxiSys User
Manual for additional information.
1. Vehicle Data Connector (DB15-Pin)
2. Power LED
3. Vehicle LED
4. Error LED
5. Bluetooth LED
6. USB LED
7. USB Port
Vehicle Data Connector
The vehicle connector connects the device to the vehicle’s DLC via a standard
DB15 –Pin OBD II cable.
5
Status LEDs
There are 5 status LEDs on the front panel of the VCI device, which indicates
its working status as well as the hardware conditions, and are very useful for
troubleshooting the device’s communication or connection to the Vehicle,
display tablet and/or the PC. See Table 1 for detailed description of the status
LEDs. Table 1 –Status LEDs on the Front Panel
LED
Description
Power
Illuminates solid green when powered on.
Vehicle
Flashes green when communicating with the vehicle’s network.
Error
Illuminates solid red when serious hardware failure occurs; also flashes
red when performing firmware update.
Bluetooth
Illuminates solid green when connected with the MaxiSys display tablet
through Bluetooth communication; also flashes green when transmitting
data between the vehicle and the display tablet.
USB
Illuminates solid green when the device is properly connected, and
communicating with the MaxiSys display tablet or the PC via the USB
cable
USB Port
The USB port provides the easiest connection between the device and the
display tablet or the PC via a USB cable, and is used to control the device
from the software application running on the PC.
6
Technical Specifications
Item
Description
Communications
Bluetooth V.2.1 + EDR
USB 2.0
Wireless Frequency
2.4 GHz
Input Voltage Range
12 VDC
Supply Current
200 mA @ 12 VDC
Operating Temperature
0°C to 50°C (ambient)
Storage Temperature
-20°C to 70°C (ambient)
Dimensions (L x W x H)
147.5 mm (5.80”) x 85.5 mm (3.37”) x 29.0 mm (1.14”)
Weight
0.215 kg (0.473 lb)
Capabilities
When used in conjunction with the display table or the OEM softwares from
the PC, the Bluetooth Diagnostic Interface device is able to perform the
following functions:
Auto diagnostics to read and clear the error memory, to display system
parameters and the status of the ECU;
Activation, adjustments and configurations that are essential for ensuring
a complete repair;
Resetting the service lights or the airbag systems;
Configuration of the ECUs, keys and remote controls, etc.
7
Product Troubleshooting
This part describes problems that you may encounter while using the VCI
device.
Vehicle Linking Error
A communication error occurs if the interface device fails to communicate with
the vehicle’s control module when performing diagnostic procedures. You
need to do the following check-ups:
Verify that the ignition is ON.
Check if the interface device’s OBD II connector is securely connected to
the vehicle’s DLC.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back
to on and continue the operation.
Verify the control module is not defective.
PC Communication Error
Verify the interface device is powered, and the green power LED is
illuminated.
Check if there is any firewall software interfering with the connection
port.
Check if the green status light is illuminated for USB communication.
If these issues have been addressed, verified, and you are still having trouble,
please contact technical supports for assistance. Refer to the MaxiSys User
Manual for additional information.
8
Driver Setup
In order for the Bluetooth Diagnostic Interface device to operate correctly with
the diagnostic applications on the PC, you will need to first install the device’s
driver onto the PC that controls the device.
The program package requires Windows XP, Windows Vista (32 or 64 bit), or
Windows 7 (32 or 64 bit).
IMPORTANT: Do not plug the interface device onto the PC until you have
installed the driver program.
The following steps may vary depending on the operating system or
components that are installed on your computer, but in general this is the
standard installation process.
1 Insert the CD that came with the MaxiSys tool kit into the CD/DVD slot of
the PC. The driver installation wizard will load momentarily. Follow the
Setup Wizard instructions to complete the whole installation process.
9
2 Click on “Next”on the welcome page.
3 Select “Next”on the installation location and installation name. It is
recommended not to change the default settings; otherwise the
computer may have a hard time recognizing the driver.
4 Click on “Install”and the driver program will be installed onto your PC.
NOTE: During this part of the process a MS-DOS style window will pop
up and may remain on your screen for a short while, which is perfectly
normal. Do not attempt to close the MS-DOS style window manually as
this will prevent the device driver being installed successfully. It will close
automatically when the device driver installation is complete.
5 When the driver is successfully installed, a confirm window will appear.
6 Click on “Finish”, and connect the interface device to the PC’s USB port.
7 A “Found New Hardware Wizard”window will pop up. Make sure “No,
not this time”is selected and click on “Next”.
Table of contents
Other Autel Diagnostic Equipment manuals
Autel
Autel MaxiCOM MK906S PRO User manual
Autel
Autel MaxiAP AP200 User manual
Autel
Autel MaxiLink ML629 User manual
Autel
Autel MaxiFlash VCMI User manual
Autel
Autel MaxiTPMS TS508K User manual
Autel
Autel MaxiTPMS TS401 User manual
Autel
Autel MaxiSan VAG405 User manual
Autel
Autel OTOFIX D1 Pro User manual
Autel
Autel MaxiService OLS301 User manual
Autel
Autel MaxiCheck MX808TS User manual
Autel
Autel MaxiSys Elite II Pro User manual
Autel
Autel MAXISYS MS906 User manual
Autel
Autel TS609 User manual
Autel
Autel TR201 User manual
Autel
Autel MaxiPro MP808 User manual
Autel
Autel MaxiSys MS906TS User manual
Autel
Autel MaxiAP AP200M User manual
Autel
Autel MaxiVideo MV301 User manual
Autel
Autel MaxiPRO MP808K User manual
Autel
Autel MaxiPRO MP808BT User manual
