-8-
English
3. Press INFO once more to display
channel information such as
frequency, signal strength and signal
quality.
4. Press EXIT at any time to close the
information window.
6.2.3 Channel List
1.Press OK to view the channel list.
2. Use ▲ or ▼ to navigate between
channels and press OK to begin
watching the selected channel. Press
Pg Up or Pg Dn to move to the
previous or next page respectively.
3.Press EXIT to close the channel
list.
6.2.4 Teletext
Press TTX to access the teletext
service.
Note: Not all channels support
teletext.
6.2.5 Last Channel Watched
Press RECALL to return to the last
channel that was being watched.
6.2.6 EPG
The EPG (Electronic Program Guide)
is the schedule of programs due to be
broadcasted in the next 7 days.
1.Press EPG to open the EPG page.
2.Use ▲ and ▼ to navigate between
channels and use ◄ and ► to
navigate through the scheduled
programs.
3.Press OK to view more detailed
information about the selected
program.
4.Press to enable the following
enhanced navigation options. Press
<EXIT> to return.
Select ‘ ’ and ‘ ’ to navigate
through programs one by one.
Select ‘ ’ and ‘ ’ to navigate
through programs by steps of 2
hours.
Select ‘ ’ and ‘ ’ to navigate
through programs by steps of 24
hours.
Note: Not all channels support EPG.
Navigation
-9-
- Schedule Recording
To add a timer for a scheduled
recording, press TIMER or EPG,
then when watching TV.
Use ▲ or ▼ to navigate between
settings and use ◄ or ► to adjust the
selected setting.
1.Select the desired Timer Mode: Off,
Once, Daily, Weekly or Monthly.
2.For Action, select Record.
Note: When selecting Record, ensure
that a USB storage device with
sufficient free space is inserted in the
USB port.
Tips: When creating a timer from the
EPG, the program time, date and
duration will be set automatically
according to information transmitted
by the broadcaster.
Should you wish to change these
settings:
1.Select the desired Channel.
2.Input the Date by using the keypad
numbers.
3.Input the Time by using the keypad
numbers (time format: hh/mm).
4.Input the Duration by using the
keypad numbers (time format:
hh/mm). Duration is the period for
which the selected channel will be
recorded.
5.Select Save and press OK to
confirm or select Cancel and press
OK to cancel.
6.2.7 Timer
- Schedule Viewing
To add a timer for a scheduled
viewing, press TIMER or EPG, then
when watching TV.
Use ▲ or ▼ to navigate between
settings and use ◄ or ► to adjust the
selected setting.
1.Select the desired Timer Mode: Off,
Once, Daily, Weekly or Monthly.
2. For Action, select View.
Tips: When creating a timer from the
EPG, the program time, date and
duration will be set automatically
according to information transmitted
by the broadcaster.
Should you wish to change these
settings:
1.Select the desired Channel.
2.Input the Date by using the keypad
numbers.
3.Input the Time by using the keypad
numbers (time format: hh/mm)
4.Input the Duration by using the
keypad numbers (time format:
hh/mm). Duration is the period for
which the selected channel will be
recorded.
5.Select Save and press OK to
confirm or select Cancel and press
OK to cancel.
Action
Action
