How to use Memory Card
Storage Space
The device has three storage spaces: internal device storage, memory card.
The user can use space in the localdisk is probably 1GB. The memory card is
on its specific capacity, the maximum support to 32GB memory card.
7" TFT TOUCH SCREEN TABLET PC 7" TFT TOUCH SCREEN TABLET PC
Note: Do Not Remove memory card while in use, This can damage your SD
card & GenTouch
Connecting to the Internet
Connecting to the internet by Ethernet：
Make the transfer box connected to the USB switch interface of the devices,
and then plug the network cable into the Ethernet port of the transfer box, in
the upper right corner of the screen appears "ETH".GENTOUCH automatically
obtain IP address via DHCP to connect the network. If you want to set IP,
please go to the Ethernet, and refer to “8.Tips and Tricks”.
Connecting to the internet by Wi-Fi：
1. Click MENU key to pop-up the menu, and then select "Settings";
2. Select "Wireless Control" in the settings menu;
3. Select the box behind the open Wi-Fi;
4. Open Wi-Fi Settings;
5. All the AP in the vicinity will be listed, click to select the name you want to
connect to AP;
6. If the AP before the connection is successful, the AP information will be
saved in the pop-up window, select "Connect" starts to connect, choose
"forget" to remove AP information;
7. If the AP is not encrypted, in the pop-up window, select "Connect" Start
Connection;
8. If the AP is encrypted, enter the password in the pop-up window, and click
"Connect" Start Connection;
9. When internet connections are successful, the wireless connection icon in
the status bar appears.
Insert memory card to the Card slot. Use finger to put the card into the slot until
“click” sound heard.
Upper left corner of the screen will prompt: SD cards are ready.
Browsing files in memory card:
Run "File Browser" program, showing all the files under the root directory. Select
"SD card" open to browse the contents of Cary.
Remove memory card:
Close all applications or documents which have been opened from the card.
Press the card lightly. It will be ejected partly. Pull the card out. Upper left corner
of the screen will prompt "has been removed SD card".
Note:
1. Insert card to the right position. Otherwise it will damage the card.
2. Once the card has been locked, it cant be formatted or written.
3. Don’t insert and remove the card repeatedly in a short time. It may cause the
card damaged.
5 6
10 You can now go back to the main menu and open your "Browser icon ."
.
The internal device storage named “nand”; the memory card named “sdcard”;
