Audiovox Car connection 2.0 User manual

Mobile Version 1.0

User Guide

Installation Process

1. Make sure vehicle is in open view of the sky.

2. Plug device into OBDII port.

3. Start the vehicle–you should see the LEDs light up on the front of the device.

4. If for any reason you do NOT see the LEDs light up, with the device installed and engine

running, unplug the device and repeat steps 2 and 3.

5. Once you see the LEDs flashing –please leave the device plugged in for at least 5 minutes.

6. If your device has a SOLID Cellular light after 5 minutes - the SYNC process is complete.

If not, please POWER CYCLE (Instructions below) to restart SYNC process.

7. Once the SYNC process is complete –log into your Car Connection 2.0 MOIBLE APP

or WEBSITE to review location, vehicle and account information.

NOTE: Data may not appear on your account until you go for a drive.

Please follow these steps and the SYNC guide (next

page) in order to connect to Network & GPS –this

process may take up to 15 Minutes:

For more information, including FAQs, please visit www.CarConnection20.com

For technical assistance, please call 1-800-300-4550

HOW TO POWER CYCLE

Un-plug device from OBDII port –for ~15 seconds

Start your vehicle’s engine

Plug device into OBDII port –with ENGINE RUNNING

Wait approximately 5-10 minutes –

with ENGINE RUNNING

NOTE: Reference SYNC Guide for more information.

Turn off vehicle/engine

LED Disconnected Time Plugged in: NA

Power: NO Synced: NO Data/GPS: NO

Installed: NO

N N N Engine: OFF

* Unplugging your CC 2.0 Device will UN-SYNC your device *

When SYNCED your CC 2.0 Device will connect “instantly”

LED KEY:

S = SOLID SB = SLOW BLINK FB = Fast Blink N = No Light

Power Cellular Ground

Syncing your Car Connection 2.0 device is a two step process. First you must plug the device into

your OBDII Port. After the installation, start your engine and follow the steps below to Sync your

device. If you are having connection issues –make sure your vehicle has a clear view of the sky.

Syncing Your Device

LED Time Plugged in: 2-5 Minutes

Ensure

POWER LED is ON, device is properly installed and

the

engine

is running. If your device has a SOLID Cellular light

after

minutes - the SYNC process is complete. If not, please

power

cycle

and continue.

FB FB FB

LED Syncing

Synced: NO Data/GPS: Possible

S SB SB

LED Sync Complete

Synced: YES NETWORK/GPS: YES

S S SB

LED Checking for Network

Synced: NO Data/GPS: Possible

S FB SB

00:00

Power Cellular Ground

POWER CYCLE TO BEGIN SYNCING PROCESS: ~5-10 Minutes

~5:00

5:01

~10:00

ATT ACTIVATION

SYNCING PROCESS

LED Checking for License

Synced: NO Data/GPS: NO

FB FB FB

Power Cellular Ground

POWER CYCLE TO

RESTART SYNCING PROCESS

SYNC PROCESS

~10:00

00:00

~5:00

Below is a chart to show you the two activation steps . When you first plug in your device, it must

first complete the At&tActivation process will need to go through each state before it is capable of

tracking and reporting data. If you unplug your device, the syncing process must be repeated.After

sync is complete - GPS/Data may take ~10 minutes to upload.

STEP

Minutes

LED Checking for License

Synced: NO NETWORK/GPS: NO

FB FB FB

Power Cellular Ground

LED Checking for Network/GPS

Synced: NO NETWORK/GPS: SEARCHING

S FB SB

Power Cellular Ground

LED Syncing

Synced: NO NETWORK/GPS: SEARCHING

S SB SB

Power Cellular Ground ?

For more information, including FAQs, please visit www.CarConnection20.com

For technical assistance, please call 1-800-300-4550

00:00

Downloading the CC 2.0 App

The Car Connection 2.0 application is available for all

Android and iOS powered devices. Please navigate to the

Google Play or App Store and search for “CarConnection 2.0”

(No space between car and connection). Once you have found

the correct application, download and install onto your device.

When it has finished installing, please open the application and

continue by logging in with your Car Connection 2.0 username

and password that you previously created.

Activate your Device

1. Open the Car Connection 2.0 App

2. Touch ‘Activate’ to start your

Device Activation

3. Enter Device IMEI and Click

‘Check’ to continue

Activating your Device

4. Register your account:

*Please note that you cannot change your username

after creation*

*Password must include at least one letter, one capital

letter, one special character, one number and be at

least 8 characters long*

*Insurance selection is optional*

Activating your Device

5. Completing the form will send a registration email to the

associated account. Log in to that email account and follow the

‘Registration Link’

6. After clicking the link you will be redirected to the Car Connection

2.0 Log In page –Log In on your Mobile Device or on the web

using your previously created Username and Password

•http://www.carconnection20.com/login/

Activating your Device

7. Please review the End User License Agreement and click

“Agree” to continue.

8. Once you log into the mobile app

for the first time –you will be

asked to enter Vehicle and Driver

information. This vehicle and driver

will be associated with your device.

9. Once you are finished touch ‘Save’

to continue.

Activating your Device

10. Finally, power the device to associate it with your account.

Your Dashboard

Table of contents

Other Audiovox Remote Starter manuals

Audiovox

Audiovox Prestige Platinum APS-51 User manual

Audiovox

Audiovox PRO-9556C Pursuit Series User manual

Audiovox

Audiovox Pursuit PRO-9275 User manual

Audiovox

Audiovox Patinum APS-997 User manual

Audiovox

Audiovox APS620 - Prestige Remote Start User manual

Audiovox

Audiovox Pursuit PRO 9246FT3 User manual

Audiovox

Audiovox Pursuit PRO-9275T User manual

Audiovox

Audiovox Pursuit PRO 9171FT User manual

Audiovox

Audiovox Prestige APS-45 User manual

Audiovox

Audiovox PRO9246FT3 User manual

Audiovox

Audiovox Prestige APS-57a User manual

Audiovox

Audiovox 128-7760 User manual

Audiovox

Audiovox Prestige Platinum APS-57C User manual

Audiovox

Audiovox Prestige APS-55LRa User manual

Audiovox

Audiovox Platinum+ APS 687C User manual

Audiovox

Audiovox Pursuit PRO-9275 User manual

Audiovox

Audiovox Prestige APS-55 User manual

Audiovox

Audiovox AS - 9151N User manual

Audiovox

Audiovox Pursuit PRO-9175FT User manual

Audiovox

Audiovox PRO9555 User manual

Audiovox

Audiovox Prestige APS-920 User manual

Audiovox

Audiovox Pursuit PRO-9051 User manual

Audiovox

Audiovox Pursuit PRO-9776 User manual

Audiovox

Audiovox Prestige Platinum APS-997C User manual

Popular Remote Starter manuals by other brands

AstroStart

AstroStart 803U user manual

Durite

Durite 0-649-20 Leaflet

EINHELL

EINHELL BT-PS 1000 Directions for use

Linear

Linear ACCESS AK-21 Installation and programming instructions

Soundstream

Soundstream TARANTULA RS.2 installation guide

Jaycar Electronics

Jaycar Electronics MB3752 instruction manual

Ultra Start

Ultra Start 72 Series owner's manual

ADS

ADS FLASHLOGIC FLRSVW1 Product guide

Selecta

Selecta JS012 instruction manual

Black Widow Security

Black Widow Security BW RAS 400 installation manual

Vector

Vector Power City DK080706 Owner's manual & warranty

Code Alarm

Code Alarm CA-535 owner's manual

Ozito

Ozito OJS-800 instruction manual

Profi-Partner

Profi-Partner 46387 instruction manual

EZ STARTER

EZ STARTER EZ-45 user guide

Viper

Viper 4204 owner's guide

Essex Electronics

Essex Electronics KE-1701 user guide

EINHELL

EINHELL EGS 3600 Directions for use

Audiovox car connection 2.0 User manual

Popular Remote Starter manuals by other brands