AUDIOLINE SENSOR 500 User manual
SENSOR 500
Dedicated Network services telephone
User guide
New
Zealand
Downloaded from: http://www.guardianalarms.net
The SENSOR 500 is a dedicated network services telephone. SENSOR 500 is
compatible with Caller ID, Call Answer and message waiting network services. In
addition it is also pre-programmed for access to other optional services.
Up to 10-speed dial memories and 20 name and number phonebook add to its
versatility
Other features include: headset socket, on-hook dialling and a choice of 12
languages for the display text.
Note: Caller display, Call Answer and other optional services are usually
subscription services.
1
Installation.................................. 3
Location of controls............... 3
Connection............................ 4
Wall mounting........................ 5
Headset..................................5
Select language..................... 5
Display....................................6
Set date and time...................6
Using the telephone................... 7
Making a call.......................... 7
On the hook dialing................7
Using a headset..................... 7
Last number redial................. 8
Volume control....................... 8
Mute....................................... 8
Pause..................................... 8
Telephone ringer.................... 8
Caller display.............................. 9
New number(s)...................... 9
Reviewing the call list.............10
List information.......................10
Erase phone number(s)......... 11
If the call list is full.................. 11
Dialling from the call list......... 11
Speed dial memories................. 12
Store number/name............... 12
Phonebook..................................13
Store.......................................14
Erase...................................... 14
Dial......................................... 14
Call Answering............................15
Miscellaneous.............................16
Trouble shooting.................... 17
Guarantee...............................18
SENSOR 500
2
1 Handset
2 Curly cord socket
3 Wall mounting hook
4 Hook switch
5 Dial-Up key
6 Scroll call list/phonebook, replay
7 Line cord socket (rear)
8 Display
9 Message waiting indicator
10 Play/Pause messages
11 Headset socket (rear)
12 Switch between speaker/headset
13 Switch for ringer level
LOCATION OF CONTROLS
14 Erase key
15 Scroll call list/phonebook, save
16 Speed-dial/pre-programmed keys
17 Volume control for handset
18 Volume control for speaker
19 Mute key
20 Key/indicator for speaker/headset
21 Dial keys 0-9, *, #
22 Programming key
23 Redial key
24 Recall-key
25 Phonebook access
3
CONNECTION TO THE TELEPHONE NETWORK
·Connect the curly cord to the left-hand side of the telephone and to the
bottom of the handset.
·Connet the power cord to middle socket of telephone and plug into power
outlet.
·Connect the telephone line cord to the socket entitled “LINE” on the rear of
the telephone and then connect the cord to the network wall outlet. The
display will show: NO CALLS.
Plug pack power
To connect headset, see page 4.
Do not place the unit in direct sunlight or in an area of high humidity.
In very rare situations the rubber feet on the base of the telephone may discolour
a surface.
It is recommended that you disconnect the base unit from the mains power dur-
ing a thunderstorm.
Do not use in the rain, near a bath or with wet hands.
To clean the product, use a damp cloth or antistatic wipe. Never spray cleaner
fluid directly onto the handset or base unit.
Headset socket Line cord socket
Line
4
WALL MOUNTING
The phone can be wall mounted, using the bracket supplied.
Use the bracket supplied to mark the position of screw holes on the wall. Drill
the holes (check for hidden pipes, etc). Use the raw plug and screws, ensuring
approximately 3 mm remain between the wall and the head of the screw.
Connect the bracket to the rear of the base unit and place the complete
assembly above the screws and gently push it down onto the screws. Rotate the
handset hanger hook 180 degrees.
HEADSET CONNECTION
A headset can be connected to the socket located on the rear of the
telephone.
1. Connect headset to
headset socket at the rear of the phone
2. Select headset position, using the switch on the right hand side of the
telephone.
On-hook dialling:
Headset:
SELECT LANGUAGE
12 languages are available for the dislpay texts: English, Swedish, Finnish,
Danish, Norwegian, German, Spanish, Dutch, Portuguese, Turkish, Italian and
French.
1. Press down until the display shows ”- - - - - - - -”, then release.
2. Press or to select “LANGUAGE”
3. Press and release .
4. Select a language, using or .
5. Press and release to store the setting.
NOTE!
We recommend that you use a Plantronics headset.
5. Press and release to store the setting.
Line
Headset socket
DISPLAY
When the unit is in standby mode the display will show: the current date and
time, if new calls have been received (if these have not been reviewed or
answered) and the total number of calls on the call list.
SET DATE AND TIME
The current date and time will be set automatically once a call is received.
However, if you want to set these values yourself, follow the procedure below:
·Press and hold until the display shows ”- - - - - - - -”., then release.
·Press and release , until the display shows ”SET TIME”.
·Press and release .
·The hour is now flashing on the display. Adjust with or .
·Press Cto store the setting and continue.
·The minute is now flashing on the display. Adjust with or .
·Press Cto store the setting and continue.
·The day is now flashing on the display. Adjust with or .
·Press Cto store the setting and continue.
·The month is now flashing on the display. Adjust with or .
Press to store the setting and return to stand-by
Text information
Numbers
New
calls
No./
Position
Time Date
6
8888888888888
88 88 88 88/18
:
MAKING A CALL
A call can be made in several different ways, using the handset, on-hook dialling
or headset.
USING the HANDSET
1. Lift the handset and wait for dial tone.
2. Dial the phone number required.
·To terminate the call replace the handset.
You can change to speaker/headset during a call by pressing and replacing
the handset.
Note: Ensure the switch on the right hand side is set to the desired function
headset/speaker.
USING the ON-HOOK DIALING
1. Ensure that the switch on the right hand side of the phone is set to .
2. Press and release . Use the volume control on the right hand side to
adjust the sound level.
3. Dial the number required.
4. When the called party answers, lift the handset.
·To terminate the call replace the handset.
USING a HEADSET
1. Ensure that the switch on the right side of the phone is set to: .
2. Press and release . Dial tone is heard in the headset.
3. Dial the number required.
·Press and release to terminate the call.
7
LAST NUMBER REDIAL
If the last number dialled was engaged or the call was not answered, it is
possible to redial the number using the button.
· Press and release . The telephone number will be dialled automatically.
·When the called party answers, lift the handset (or headset) to converse. If
the call is not answered, press and release
It’s also possible to lift the handset and then press the redial key.
VOLUME CONTROL
The sound volume in the handset or headset can be adjusted using the
[VOL ] to increase the volume , and [VOL ] to decrease the volume.
MUTE
If during a telephone conversation, you wish to talk privately to a third party
without the caller overhearing: Press the button (the word MUTE will appear
on the display). To resume the conversation, press the button again.
PAUSE
A short pause to numbers stored in the phone book and the speed-dial
memories, using this button. This may be required if the phone is
connected to a PABX or if used with some network services.
TELEPHONE RINGER
The telephone ringer volume can be set to either high, low or off which is
represented by this symbol .
8
CALLER DISPLAY
Caller display allows you to see who is calling before you answer a call and to
see who has called in your absense. When the service is implemented on your
telephone line, seconds before your telephone rings the number of the
incomming caller will appear on the display. Up to 60 incomming numbers can
be stored in the call list. When the list is full, the oldest number will be deleted
automatically.
It is not possible to view the call list and take a new call at the same time.
NOTE!
Caller Display is an optional telephone Network service. If the caller Display
service is not implemented on your telephone line, incomming call information
will not be displayed.
NEW NUMBERS
The words NEW CALL and the number of calls will appear on the display. The
envelope symbol on the display will flash. Once the number(s) have been
reviewed, NEW CALL will disappear and the indicator will stop flashing.
When an incoming number is received it is assigned a call sequence number
which appears on the top left hand side of the display, commencing with 01
(oldest call) up to 60 (latest call).
9
Other manuals for SENSOR 500
3
Table of contents
Other AUDIOLINE Telephone manuals
AUDIOLINE
AUDIOLINE Splash 38x Combo User manual
AUDIOLINE
AUDIOLINE 505 User manual
AUDIOLINE
AUDIOLINE TEL38CLIP User manual
AUDIOLINE
AUDIOLINE FF 888-2 User manual
AUDIOLINE
AUDIOLINE CLD60 User manual
AUDIOLINE
AUDIOLINE 30 User manual
AUDIOLINE
AUDIOLINE BigTel 150 User manual
AUDIOLINE
AUDIOLINE Matrix 400 User manual
AUDIOLINE
AUDIOLINE CASINO User manual
AUDIOLINE
AUDIOLINE TEL38 SMS User manual
AUDIOLINE
AUDIOLINE TEL49 CLIP User manual
AUDIOLINE
AUDIOLINE BigTel 480 User manual
AUDIOLINE
AUDIOLINE OSLO 501 User manual
AUDIOLINE
AUDIOLINE TAB968 User manual
AUDIOLINE
AUDIOLINE TEL 8 PLUS User manual
AUDIOLINE
AUDIOLINE 25 User manual
AUDIOLINE
AUDIOLINE Funny Cow Phone User manual
AUDIOLINE
AUDIOLINE TEL28 User manual
AUDIOLINE
AUDIOLINE TEL5 clip User manual
AUDIOLINE
AUDIOLINE Tangent 502 User manual
