Audio Precision APx1701 Series User manual

APx1701

transducer test interface

Installation Instructions,

Specifications and User Guide

February, 2018

model APx1701

Printed in the United States of America.

No part of this manual may be reproduced or transmitted

in any form or by any means, electronic or mechanical, in-

cluding photocopying, recording, or by any information

storage and retrieval system, without permission in writing

from the publisher.

Audio Precision, AP, and APx are trademarks of Audio

Precision, Inc. Windows™ is a trademark of Microsoft Cor-

poration. Dolby and the double-D symbol are trademarks

of Dolby Laboratories, Inc. DTS is a trademark of DTS, Inc.

pn 8211.0341 rev 003 XVIII0220130032

Audio Precision

5750 SW Arctic Drive

Beaverton, Oregon 97005

503-627-0832

800-231-7350

ap.com

Documentation and Support

This booklet contains safety information, installation instructions, full specifications and a

user’s guide for the Audio Precision APx1701 transducer test interface. The APx1701 is an

accessory to Audio Precision APx500 series audio analyzers, and cannot be operated without

an APx500 series analyzer and the APx500 measurement software.

Installation instructions and specifications for APx500 series analyzers are in other docu-

ments, provided with the analyzer. Information about using APx500 measurement software is

found in the APx500 embedded Help and in the APx500 User’s Manual.

The APx500 User’s Manual

Detailed information on the operation of the APx1701 transducer test interface is avail-

able from the embedded Help installed with the APx500 measurement software, and in the

APx500 User’s Manual. The user’s manual is available as a PDF on the APx500 Application

Disc and on the web at ap.com; a hard-copy version can be ordered from Audio Precision or

your local distributor.

Audio Test Discs

These discs and more can be ordered from Audio Precision or your local distributor.

• APx-DVD1 is a playable video DVD with menu-driven linear and coded audio test sig-

nals for external source use with DVD players.

• APx-CD1 is a playable audio CD with linear audio test signals for external source use

with CD players.

ap.com

Visit the Audio Precision web site at ap.com for APx support information and APx

resources. You can also contact our Technical Support staff at techsupport@ap.com, or by

telephoning 503-627-0832 ext. 4, or 800-231-7350 ext. 4 (toll free in the U.S.A.).

APx1701 Transducer Test Interface: Table of Contents

Table of Contents

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installation (FR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Abbreviations, Terms and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

APx1701 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter 1: Table of Contents

APx1701 Transducer Test Interface: Table of Contents

APx1701 Transducer Test Interface: Safety i

Safety

Safety Information

Do NOT service or repair this equipment unless properly

qualified. Servicing should be performed only by a quali-

fied technician or an authorized Audio Precision distributor.

Do NOT defeat the safety ground connection. This equip-

ment is designed to operate only with an approved three-

conductor power cord and safety grounding. Loss of the

protective grounding connection can result in electrical

shock hazard from the accessible conductive surfaces of this

equipment.

Do NOT exceed mains voltage ratings. This equipment is

designed to operate only from a 50–60 Hz ac mains power

source at 100–240 Vac nominal voltage. The mains supply

voltage is not to exceed ±10 % of nominal (90–264 Vac).

For continued fire hazard protection, fuses should be

replaced ONLY with the exact value and type indicated on

the rear panel of the instrument and discussed on page 2 of

this booklet.

The input measurement terminals are intended to be used

for the measurement of audio signals only.

Do NOT substitute parts or make any modifications with-

out the written approval of Audio Precision. Doing so may

create safety hazards. Using this product in a manner not

specified by Audio Precision can result in a safety hazard.

This product is for indoor use—Installation Category II,

Measurement Category I, pollution degree 2.

To clean the enclosure of this product, use a soft cloth or

brush to remove accumulated dust. A mild detergent may be

used to remove remaining dirt or stains. Do not use strong

or abrasive cleaners. Wipe all surfaces with a damp cloth.

Chapter 1: Safety

ii APx1701 Transducer Test Interface: Safety

This unit is designed for rack mounting, but is also sup-

plied with four feet that can be attached to the bottom sur-

face for desktop use.

Safety Symbols

The following symbols may be marked on the panels or

covers of equipment or modules, and are used in this man-

ual:

WARNING!—This symbol alerts you to a potentially haz-

ardous condition, such as the presence of dangerous volt-

age that could pose a risk of electrical shock. Refer to the

accompanying Warning Label or Tag, and exercise extreme

caution.

ATTENTION!—This symbol alerts you to important oper-

ating considerations or a potential operating condition that

could damage equipment. If you see this marked on equip-

ment, refer to the Operator’s Manual or User’s Manual for

precautionary instructions.

FUNCTIONAL EARTH TERMINAL—A terminal marked

with this symbol is electrically connected to a reference

point of a measuring circuit or output and is intended to be

earthed (grounded) for any functional purpose other than

safety.

PROTECTIVE EARTH TERMINAL—A terminal marked

with this symbol is bonded to conductive parts of the instru-

ment and is intended to be connected to an external protec-

tive earthing (grounding) system.

WARNING! HOT SURFACE—This symbol is marked on a

surface that may become too hot to touch during operation.

Disclaimer

Audio Precision cautions against using their products in a

manner not specified by the manufacturer. To do otherwise

may void any warranties, damage equipment, or pose a

safety risk to personnel.

Table of contents

Popular Transducer manuals by other brands

HBM

HBM AD101B quick start guide

Camille Bauer

Camille Bauer SINEAX F534 operating instructions

Trane

Trane KIT 16724 Installer's guide

Lumel

Lumel P18 user manual

B&C Speakers

B&C Speakers DE75PTN datasheet

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 technical information

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series user manual

ProMinent

ProMinent Dulcometer DMT operating instructions

MKS

MKS MicroPirani 925 Series Short form manual

WIKA

WIKA WU-20 operating instructions

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A instruction manual

Camille Bauer

Camille Bauer SIRAX CH-5610 operating instructions

WIKA

WIKA F2802 operating instructions

Veris Industries

Veris Industries PW Series installation guide

HBM

HBM TJ1-S6 installation manual

Simrad

Simrad ES120-7C - REV D Dimensions

HBM

HBM C18 Mounting instructions

Airmar

Airmar M260 Owner's guide & installation instructions