AUDAC SourceCon DMP42 User manual
User manual
DMP42
audac.eu
DMP42 - User manual02
ADDITIONAL INFORMATION
This manual is put together with much care, and is as complete as could be on the publication date. However,
updates on the specications, functionality or software may have occurred since publication. To obtain the latest
version of both manual and software, please visit the Audac website @ www.audac.eu.
DMP42 - User manual 03
Table of contents
Introduction 05
Precautions 06
Chapter 1 08
Connections and connectors � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 08
Chapter 2 09
Overview DMP42 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 09
Chapter 3 011
Using the DMP42 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 011
Module screen � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 011
Chapter 4 015
Installing the DMP42 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 015
Technical specications 017
Notes 018
DMP42 - User manual04
DMP42 - User manual 05
Introduction
SourceCon™ DAB/DAB+ & FM tuner module
The DMP42 is a professional DAB/DAB+ & FM tuner featuring SourceCon™ modular technology. This unique technology
guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is
instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex conguration.
The DMP42 provides access to a wide variation of radio stations while guaranteeing a high quality audio reproduction. Station
selection can be done manually or automatically, while up to 10 preferred channels can be internally stored and recalled.
Radio station information carried by RDS / Radiotext can be retrieved, while other functions such as mono/stereo switching
(FM) always guarantee the best possible audio clarity.
The signal output level is user congurable, while dynamic range compression (DRC) is supported, improving the intelligibility
for low volumes in applications with high levels of background noise. Signal reception strength can be retrieved from the
module and indicated on the graphical interface of the controlling device.
The antenna input is implemented by an F-type connector on its panel, allowing connection of the included antenna cable
or any other external antenna using 75 Ωcoaxial cabling. The balanced stereo line output is connected through two 3-pin
terminal block connections.
DMP42 - User manual06
Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY
ALWAYS HANDLE THIS UNIT WITH CARE
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH
LIQUID ON TOP OF THIS DEVICE
NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS
DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS ADEQUATE
VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS.
DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.
DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT
DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR VIBRATION
THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER
UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME
ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE EARTHING CONNECTION
THE MAINS PLUG OR APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, SO THE DISCONNECT DEVICE SHALL BE READILY
OPERABLE
USE THE APPARATUS ONLY IN MODERATE CLIMATES
CAUTION
The symbols shown are internationally recognized symbols that warn about potential hazards of electrical products.
The lightning ash with arrow point in an equilateral triangle means that the unit contains dangerous voltages. The
exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the users manual.
These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service
the unit yourself. Refer all servicing to qualied personnel. Opening the chassis for any reason will void the manufacturer’s
warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service.
Disconnect the unit during storms to prevent damage.
DMP42 - User manual 07
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing to qualied service personnel. Do
not perform any servicing (unless you are qualied to)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further relevant specications described
in following directives: 2014/30/EU (EMC), 2014/35/EU (LVD) & 2014/53/EU (RED).
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be disposed with regular household waste
at the end of its life cycle. This regulation is created to prevent any possible harm to the environment
or human health.
This product is developed and manufactured with high quality materials and components which can be
recycled and/or reused. Please dispose this product at your local collection point or recycling centre for
electrical and electronic waste. This will make sure that it will be recycled in an environmentally friendly
manner, and will help to protect the environment in which we all live.
DMP42 - User manual08
Chapter 1
Connections and connectors
CONNECTION STANDARDS
The in- and output connections for AUDAC audio equipment are performed according to international wiring
standards for professional audio equipment
3-Pin Terminal block:
Left:
Center:
Right:
For balanced signal output connections
For balanced signal output connections For unbalanced signal output connections
Signal -
Signal +
Ground
+
+
DMP42 - User manual 09
Connections and connectors
Chapter 2
Overview DMP42
1) Balanced stereo line output:
The balanced stereo line output is implemented using two 3-pin terminal block connectors. The audio output available on
this connector allows it to be fed to any amplier or pre-amplier.
The DMP42 is a SourceCon™ compatible module featuring an (internal) board-edge connector which carries all signals for
getting it connected to any supporting main unit.
All external in & output connections shall be made using the available connectors on the panel.
2) F-type antenna connection:
The antenna (input) connection is implemented using an F-type connector whereto the supplied antenna should get connected.
Depending of the installation conditions, location and signal strength, it can be recommended / necessary to extend the
antenna using 75Ωcoaxial cable and connect an external or outdoor antenna
2
1
DMP42 - User manual010
3) Antenna power supply jumper (5V):
An internal jumper enables a 5 Volts supply on the antenna connection for powering active antennas. Active antenna’s include
a small signal amplier, improving reception and signal transmission to the receiver.
In default conguration the antenna power supply is disabled. Enabling is done by changing the position of the corresponding
jumper as indicated below.
Antenna power enabled (5V)
1
2
3
Antenna power disabled (default)
Indication of antenna power jumper positions on DMP42
NOTE
Verify whether the connected antenna is an active or a passive model. When the antenna power supply is enabled to a
passive model, permanent damage to the equipment might occur. The default supplied (included) antenna is a passive
model, not requiring the antenna power to be enabled.
Table of contents
Other AUDAC Control Unit manuals
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
