AUDAC PX110 User manual

Table of contents

Other AUDAC Amplifier manuals

AUDAC

AUDAC PRE16 Installation and operating instructions

AUDAC

AUDAC AMP22 User manual

AUDAC

AUDAC DPA152 Installation and operating instructions

AUDAC

AUDAC CPR12 Installation and operating instructions

AUDAC

AUDAC R1 Installation and operating instructions

AUDAC

AUDAC AMP523 Installation instructions

AUDAC

AUDAC D2 User manual

AUDAC

AUDAC AMP20 User manual

AUDAC

AUDAC PRE116 User manual

AUDAC

AUDAC AMP20 MK2 User manual

AUDAC

AUDAC DPA74 Installation and operating instructions

AUDAC

AUDAC AMP523MK2 User manual

AUDAC

AUDAC CPA12 Installation and operating instructions

AUDAC

AUDAC COM12 Mk2 User manual

AUDAC

AUDAC POW2 User manual

AUDAC

AUDAC AMP523MK2 User manual

AUDAC

AUDAC SMQ User manual

AUDAC

AUDAC COM12 Installation and operating instructions

AUDAC

AUDAC CAP224 User manual

AUDAC

AUDAC PRE220 User manual

AUDAC

AUDAC CAP412 Installation and operating instructions

AUDAC

AUDAC EPA252 User manual

AUDAC

AUDAC Dante AMP203LO User manual

AUDAC

AUDAC D2 Installation and operating instructions

Popular Amplifier manuals by other brands

ASTRO

ASTRO HVO V40 P operating manual

Marantz

Marantz SUPERSCOPE BLA-545 Service data

NAD

NAD CI980 Quick setup guide

Technics

Technics SE-CH770 Service manual

Harman Kardon

Harman Kardon HK6300 instruction manual

NAD

NAD T975 owner's manual

McIntosh

McIntosh MA6850 Brochure & specs

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N manual

Viatron

Viatron Autrix Technical manual

GME

GME GA9800 instruction manual

Atlas

Atlas CP700 Specification sheet

Roland

Roland KC-1000 owner's manual

Pyle

Pyle PFMRA350BW user manual

Advantage

Advantage S-250 manual

IRT Electronics

IRT Electronics DVA-3007 manual

Dimavery

Dimavery BA-100 Series user manual

Sony

Sony XM-S400D operating instructions

Schertler

Schertler ROY X quick guide

PROFESSIONAL AUDIO EQUIPMENT

Speaker Cabinet PX110

UserManual&InstallationGuide

Speaker Cabinet

PX110

AUDAC

1

A U D A C P R O F E S S I O N A L A U D I O E Q U I P M E N T

User Manual & Installation Guide

AUDAC

http://www.audac.be

info@audac.be

Before connecting or installing this product, first read these instructions carefully

2

Warning

Use only the correct amplifier output voltage and impedance, exceeding these limits could

cause fire or other failures.

Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles.

Only install the speaker in locations that can structurally support the weight of the speaker and

the mounting bracket. Not doing this may result in the speaker falling down.

Do not use any other method than specified to mount the bracket (the mounting bracket that

is specified for this speaker is the MBK110). If extreme force is applied to the speaker, the

speaker could fall down.

Attach a safety wire to the speaker when it is mounted high above the ground. Failure in doing

so could cause the speaker to fall down for any reason.

Use fixing materials that are appropriate for the ceiling’s or wall’s structure and composition.

Failure to do so may cause the speaker to fall down.

Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after

installation to prevent accidents.

Avoid mounting the speaker in locations exposed to constant vibrations. The mounting

bracket can be damaged by excessive vibrations, potentially causing the speaker to fall down.

3

Caution

Avoid electric shocks: switch off the amplifier power when connecting the speaker.

Avoid installing the speaker in locations exposed to solvents, acids, smoke and heaters, as

excessive exposure to these factors could result in speaker failure, fire or electric shock.

Do not operate the speaker for an extended period of time at distorted sound. This could

cause (irreparable) damage to the speaker.

Do not stand or sit on, nor hang down from the speaker as this may cause the speaker to fall

down or drop.

Appearance

4

Installation

Install the speaker with the mounting

bracket MBK110 in an appropriate

location. Tighten them with nuts and bolts.

To adjust the directivity of the speaker,

loosen the bolts at the top and bottom of

the mounting bracket. Then you can

position the speaker. Afterwards, tighten

the bolts firmly.

Connections

Plug the speaker cable into the socket at the

backside of the speaker.

Use speaker connections with the speaker

cable attached at +1,-1 of the connector.

5

Specifications

RMS Power 180 Watt

Max Power 350 Watt

SPL (1W/1M) 98 dB

SPL (Max/1m) 120 dB

Frequency Response -3 dB 80-18000 Hz

Frequency Response -10 dB 65-20000 Hz

Horizontal Coverage 90°

Vertical Coverage 60°

HF Driver 1 inch

LF Driver 10 inch

Crossover Frequency 2500 Hz

Impedance 8 Ohm

Dimensions (WxHxD) 315x545x325 mm

Weight 15.5 Kg

Mounting MBK110 (optional)

Color Black