ATP Instrumentation AVB-710 User manual
20 Metre Pipe Inspection Camera
System
Model No. AVB-710
Instructions for Use.
ATP Instrumentation Ltd
Tournament Way
Ivanhoe Ind Est
Ashby De La Zouch
Leicestershire
LE65 2UU
Sales: 01530 566800
sales@atp-instruments.co.uk
Technical: 01530 566804
technical@atp-instruments.co.uk
www.atp-instrumentation.co.uk
IMPORTANT NOTICE
Should this equipment ever need to
be returned to ATP Instrumentation
Ltd for any reason and based on the
type of applications it is used for,
please ensure that it is in a clean,
hygienic condition (disinfected or
sterilised where necessary). Any
equipment returned in a dirty or
suspect condition will be returned to
the sender.
ATP PIPE & DUCT CAMERA INSPECTION SYSTEM
SET-UP & OPERATING INSTRUCTIONS
Read these instructions carefully before the operation of this system
Fully charge the battery before first use
Technical Specification:
Camera
Camera Size Φ 23mm*120mm
Camera Housing Material Stainless steel
Camera Lens Material Sapphire glass
Sensor Size 1/4 inch
Total Pixels PAL:720*576 NTSC:720*480
View Range 120 °
Illumination 12PCS white LEDS
Waterproof Level IP68
Camera Work Current 100MA
Camera Power Supply DC 12V
Operating Temperature -28°C to +50°C
Monitor
Monitor Size 7 inch TFT colour monitor + video output
Pixels 1440*234
OSD Language
English
DVR
DVR Power Supply
12V
DVR Work Current 200MA
Media Storage SD/SDHC card (max32G)
Digital Clock and Calendar
Battery Level Display
Total Pixels 720*567(D1)
Picture Snap and Video Record
Movie Format AVI
Microphone Audio Record
Stereo Earphone Output
Cable Wheel
Cable Size Φ325mm in reel
Wire Material Fibreglassrod
FibreglassLength 20m
Fibreglass Diameter Φ4.8mm
Fibreglass Colour Yellow
WARNING!
-Read this manual carefully before operating this system
-Avoid using the device inextreme humidity or temperatures as this may cause
damage to the device
-Do not drop or press on the system as this may cause damage to the device
-The warranty becomes void if any physical damage is present or if the system is
disassembled by the user
-Do not disconnect the SD card while recording or playing as this may damage the
system and/or the SD card
-Remember to always back up the data on your SD card
Monitor:
1 – Video selector button
2 – Image rotation button
3 – Secondary menu button
4 – Secondary menu down
5 – Secondary menu up
6 – Fuse socket
7 – Charger port
8 – Video output connector
9 – Earphone output port
1
–
Sun shade
2 – 7” Monitor
Controls:
1 – Power Controls
2 – LED brightness adjuster
3 – Battery level indicator
4 – DVR status indicators
5 – Menu up
6 – Menu down
7 – Menu left
8 – Menu right
9 – Playback stop/ Menu back
10 – Quick playback
11 – Menu
12 – Select/OK
13 – Record/ Stop recording
14 – Microphone
15 – SD card slot
16 – USB keyboard input
Menu:
Recorder setting:
1 – Work mode:
Video – Record videos
Photo – Snapshot photos
Audio – Record audio
2 – Motion detection:
Off– Stop the motion detection
On – Start the motion detection
3 – Sensitivity:
High – Highest sensitivity
Medium – Standard sensitivity
Low – Lowest sensitivity
4 – Resolution:
720 x 576
720 x 480
640 x 480
5 – Video quality:
High – Highest quality
Medium – Standard quality
Low – Lowest quality
6 – Time stamp:
Off – The time stamp will not be shown on the screen
On – The time stamp will be shown on the screen
7 – Video time:
Length of video recording
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
8 – FPS set:
15 FPS – 15 frames per second
30 FPS – 30 frames per second
9 – Audio record volume:
Sets the volume that audio records at from 1-10
10 – Overwrite:
Off– The recording will stop when the disk is full
On –The recording will overwrite oldvideo files whenthe disk is full
System setting:
1 – Language:
Select the operating language
2 – Date Time:
Set the date and time, press OK to confirm
3 – Video output:
Choose wither PAL or NTSC mode to suit your monitor and TV video output
4 – Format:
No –The system willnot format the SD card
Yes – The system will format the SD card (Please remember to back up your data)
5 – Firmware update:
No – The system will not update the firmware
Yes – The system will update the firmware
6 – Memory info:
All – The storage capacity of the SD card
Free – The storage capacity left on the SD card
7 – Default setup:
No –Leaves set up as it is
Yes – Factory resets the system
8 – Version:
Systems software version
Table of contents
