ATOMIC4DJ PLS4 Wireless User manual
Atomic4Dj PLS4 Wireless
Cod. 61098
User Manual
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 1
Unpacking Instructions
Read Manual before Operation
Dear user,
Thanks for choosing our LED device, believing this brand new product will bring you unlimited mar-
vel and happiness. Before operating this device, please read this manual thoroughly, and retain it
for future reference.
Warning Data
Please note the warnings in bold which will ensure the safe and smooth operation. These warnings
are important to a certain extent.
Attention! Indicates a skill or other useful information for special situations.
Important! Indicates important information to protect personnel from laser incident or injury.
Caution! Prevent damage or injury from incorrect operation.
Warning! If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a
special cord or cord exclusively available from the manufacturer or his service agent.
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such
an extent that their effectiveness is impaired, for example by cracks or deep scratches.
The lamps shall be changed if it has become damaged or thermally deformed.
Unpacking Instructions
As receiving a fixture, carefully unpacking the carton, checking contents to ensure that all parts are
in good condition. Informing the shipper immediately and retaining packing material for inspection
if any parts damaged from shipping or device damaged. Keeping packing materials as evidence for
shipper’s confirmation.
Attention!
This unit is in perfect condition before delivery; please check all accessories when unpacking the
unit. User should follow this user manual to operate this unit, and make sure that you are clear on
all laser safety information and unit operation before power it on. Any wrong operation will make
this unit out of warranty.
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 2
Carefully moving after receiving it, checking whether there is any damage from shipping, and all
the accessories in it.
Safety Instructions
To protect the environment, please try to recycle the packing material as much as possible.
The projector is for indoor use only, IP20. Use only in dry locations. Keep this device away from
rain and moisture, excessive heat, humidity and dust. Do not allow contact with water or any
other fluids, or metallic objects.
Don’t throw this product away just as general trash, please deal with the product follow the
abandon electronic product regulation in your country.
Locate the fixture in a well ventilated spot, away from any flammable materials and/or li-
quids. The fixture must be fixed at least 20cm from surrounding walls.
To avoid condensation to be formed inside, allow this unit to adapt to the surrounding temperatu-
res when bringing it into a warm room after transport. Condense sometimes prevents the unit
from working at full performance or may even cause damages.
Don’t cover any ventilation openings as this may result in overheating.
Don’t install it on flammable object.
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 3
NAME QTY
LED system 1 set
Power Cord 1 pcs
User manual 1 pcs
Stand 1 pcs
Wireless Footswitch 1 pcs
Packing Case 1 set
Don not use it when maximum ambient temperature is higher than 40 degree.
Unplug the unit when it is not used for a longer time or before replacing the bulb.
Don’t open the top cover to avoid unit damage.
Please use the original packing when the device is to be transported.
Never expose the lens to direct sunlight, even for a short period, this may damage the light ef-
fect or even cause fire!
O erhead Rigging
O erhead Rigging
Attention! The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and /or damage to property. Overhead rigging re-
quired extensive experience! Working load limits should be respected, Certified installation
materials should be used, the installed device should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted persons during rigging, de-
rigging and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids.
The fixture must be fixed at least 50cm from surrounding walls
The device should be installed out of reach of people and outside areas where persons may walk
by or be seated.
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 4
The device should be well fixed; a free swinging mounting is dangerous and may not be conside-
red!
Do not cover any ventilation opening as this may result in overheating
Before the first time use, it must be inspected by professional staff to make sure safety, inspection
regularly every year..
Before rigging make sure that installation area can hold the 10 times weight of device. Using
the steel rope which can hold 12 times weight of device, through the eye-bolt for assisting hang
installment.
AC Power
Please use the attached power, note that power voltage and frequency are the same as the mar-
ked voltage and frequency of device when connecting power. Every device’s power should be con-
nected separately, so that device can be controlled individually.
Cable spec.:
Cable(EU
)Cable(US) Pin Internatio-
nal
Brown Black Live L
Light blue White Neutral N
Yellow/Gr
een
Yellow/Gre
en Earth
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 5
DMX-512 connection
Connection between laser lights and DMX must use the shied cable of diameter more than
0.5mm. Please use the attached 3 pin XLR plug/socket to connect the DMX output/input inter-
face. The connection between socket and cable as below( note the plug/socket’s 3 pin number
and position).
Note, XLR plug/socket’s 3pin can not be touched by inner hull, connection between pins is not
allowed. Except above connection, XLR plug/socket can not be connected with XLR control line.
Device receives international standard DMX512(1990) control signal.
When using standard DMX512 control signal, the last device’s output interface must be connec-
ted to a DMX plug. This plug is putting a 120 ohm resistance between “canon” plug’s 2 pin and 3
pin. Showing as below pic. Sticking this plug into the last device’s signal output interface, it will
avoid the interference during the process of signal transmission.
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 6
Operation Instructions
Product operation diagram
Footswitch Operation Instruction
NOTE：All the operations from the footswitch is invalid to the DMX mode and the SLAVE mode.
NO FUNCTION DESCRIPTION
1 LED PAR lights 12*Tri-9W
2 LED strobe lights 4*1W white LED strobe lights
3 DMX input/output 3PIN male/female XLR interface，for DMX communication
4 Power connection Power output connect with next light
5 Power input Power input socket, built-in protective tube and spare tube
6 Microphones
Receiving the audio signal through a microphone, and positive re-
sponse to the intensity by the potentiometer
7 Potentiometer To adjust the sound activated sensitivity
8
LCD control interfa-
ce Various mode setting operations of the machine
9 Wireless antenna Receiving wireless footswitch signal
NAME FUNCTION
AUTO Press AUTO to activate the auto program
controls. When working, all the lights will
begin in auto mode.
SOUD Press SOUND to activate the sound pro-
gram controls. When working, all the
lights will begin in sound mode.
COLO Color setting: R-G-RG-B-RB-GB-RGB
BLACKOUT Light off.
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 7
Menu operating instruction
Once after every power on machine, the VERSION and MANUFACTURE INFORMATION will be
shown in LED monitor of rear panel. When the machine is powered on, LED monitor on rear
panel shows the current operating standalone mode or DMX address of DMX mode. With help
of LED control panel, is very easy to set and change the operating mode. After every resetting
and saved, the new mode information will be shown on LED monitor at next power。
Model choice ，return to the previous menu.
Go into the deeper menu.
For higher numeric value operation.
For lower numeric value operation.
LED Display Functional Description
AutP → AP01-AP17 PAR light auto mode
AutF → AF01-AF10 Flash light auto mode
AutM → AM01-AM03 Mix auto mode
S.01-S.99 Effect speed adjustment. 01 is the slowest, 99
is the fastest
SouP → SP01-SP12 PAR light sound mode
SouF → SF01-SF10 Flash light sound mode
SouM → SM01-SM03 Mix sound mode
COLO Color manual adjustment
R/G/BXXX LED color setting
S.00-S.99 Flash light speed adjustment. S.00: all on; S.99
is the fastest
SY-A Synchronous auto mode
SY-M Synchronous sound mode
S.01-S.99 Auto show speed. 01is the slowest, 99 is the
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 8
MEN
U
fastest.
d001 Signal reception mode (the worlds will strobe
if there’s no signal)
03/05/24CH DMX channel selecting
dXXX Channel address setting
S001 Slave mode
001-255 Address setting
M-En Be the master for synchronous mode.（under
AUTO/SOUND/COLOR Mode）
W-En Wireless pedal working mode
TEST Aging testing and main board testing program.
REST Restore the factory initial setup
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 9
Initial Setting
Buil-
t-in
auto
pro-
grams
AP01-AP17
PAR light auto
show
AF01-AF10
flash light auto
show
AM01-AM03
Mix auto show
ENTER
into the
next step.
To choose
the effect
speed th-
rough the
UP/DOW
N button.
S.01-S.99：Effect
speed adjust-
ment. 01 is the
slowest, 99 is the
fastest
ENTER:
confirm
and
back to
the pre-
vious
step.
Buil-
t-in
sound
pro-
grams
AP01-AP12
PAR light auto
show
AF01-AF10
flash light auto
show
AM01-AM03
Mix auto show
Enter to confirm. To adjust the sound
sensitivity through the potentiometer.
COLO
color
setting
R.000-R.255
G.000-G.255
B.000-B.255
ENTER
into the
next step.
MENU to
the pre-
vious
step.
S.00—S.99：
strobe speed
S.00: all on, S.99:
the fastest
ENTER:
confirm
and
back to
the pre-
vious
step.
DMX
mode
03/05/24CH Selecting
the chan-
nel
d001-dXXX Setting
the ad-
dress
SLAVE
mode
When selec-
ting the SLAVE
mode, this ma-
chine will fol-
low the ma-
ster’s built-in
program th-
rough the DMX
cable.
ENTER
into the
next step
001-255 address
setting
ENTER:
confirm
and
back to
the pre-
vious
step.
Sy-
stem
setting
M-En: master
mode
ENTER
into the
next step
ON：turn on
master mode
ENTER:
confirm
and
Atomic4Dj PLS4 Wireless www.Atomic4Dj.com 10
MEN
U
This manual suits for next models
1
Table of contents
Other ATOMIC4DJ Dj Equipment manuals
