Atel WB550 Series User manual
MIMO
ATEL'S CPE
※：n30/LTE B30/LTE B48 21 dBm ±2 dB
n41/n77/n78/B41 are HPUE 26 dBm ±2 dB
※
WB550-NA-00
North America
5G Sub-6:
n2/n5/n7/n12/n14/n25/n30/n41/n48/n66/n71/n77/n78
LTE FDD: B2/B4/B5/B7/B12/B13/B14/B17/B25/B26/B29/B30/B66/B71
LTE TDD: B41/48
LAA: B46
WCDMA: B2/4/5
Module: Verizon & AT&T Certified
We remind users here that changes or modifications not explicitly approved by the responsible party may cause users to lose the
authority to operate the equipment.
Quick Start Guide
Introduction
The WB550 is a premium indoor 5G NR CPE, designed for 802.11a/b/ g/n/ac/ax dual
band Wi-Fi access. The product provides optimized high throughput data and a wide
area coverage network for residential, commercial and enterprise users, supporting
multiple services.
Customers enjoy reliable dual-band Wi-Fi AP functions, broadband access and hot-
spot Wi-Fi connections with the WB550.
LTE /5G NR BTS
Indoor
CPE
Power
Adapter
Wi-Fi 11 a/b/g/n/ac/ax
I/O Panel of Router
Packing
List
LED Panel of Router
Make sure you have everything you need to properly configure the device.
IDU
Power supply
Ethernet cable
Configure
Hardware
Insert SIM Card
If you want to remove the SIM card, please lightly press the SIM card,
the SIM card will pop out. Make sure the CPE is turned off before you
insert or remove your SIM card. Otherwise, the CPE and SIM card may
be damaged.
Please insert your SIM card (3FF) as following:
How
does
it
Work
The figure is just for reference only, please connect according to your
requirements.
Step 1 Connect the supplied power adapter to the CPE. Step 2 Connect
other devices.
You can connect your computer or classic Switch via Ethernet cable to LAN
port.
You can connect your laptop via Wi-Fi.
You can connect your telephone via TEL port.
When you are using the CPE, you can adjust the position and direction of CPE to get
stronger NR signal, you can judge from the NR signal LED indicators.
LED
Indicators
When set up the CP860, you will see the following LED indicators:
Indicator
Status
Description
POWER
Steady on
Power On
Off
No Power Supply
INTERNET
Steady on
Internet Available
Off
Internet Unavailable
Blinking
(500ms interval)
Searching network of NR
WiFi
Steady on
WiFi Available
Off
WiFi unavailable
VOICE
Steady on
VOICE
Available
Off
VOICE
Unavailable
SIGNAL
Steady on
Display the current LTE network signal, the
stronger signal, the more bars on
Off
No Signal
Blinking one by one
Firmware upgrade
Configure
The
CPE
Login
to
the
Website
Use a browser to access the management web page to configure and manage
the CPE.
The following procedure describes how to use a computer running Windows 7
or above version and Internet Explorer to connect to the CPE webpage.
Step 1
Step 2
Connect the CPE correctly.
Start Internet Explorer, go to http://192.168.1.1 in the
address bar, and press Enter.
Step 3
click Log In.
Enter the user name (admin) and password (admin), and
You can connect to the management web page after the password is verified.
Configuration
of
NR
Step 1 Connect the CPE correctly.
Step 2 Enter the management website.
Step 3 Choose Settings →Network →NRSettings. Step 4 Set the
connection mode and scan mode.
The default setting is automatically connection and full band scanning,if you want to connect the LTE network according to your needs,you can set the connection mode as manual,and simply scan a
specified band.
Configuration
of
Wi-Fi
Step 1
Step 2
Step 3
Step 4
Connect the CPE correctly.
Enter the management website.
Choose Settings →Wi-Fi →WLAN Settings.
In the General Settings, set Wi-Fi Enable or enable Wi-Fi with the
Wi-Fi button.
Step 5
Step 6
In the Setting, change the SSID, such as "NR-Router"
To ensure data security, it is recommended that you change
the Wi-Fi password by default.
Step 7
Click Submit to save the settings.
Other manuals for WB550 Series
1
This manual suits for next models
1
Table of contents
Other Atel Network Router manuals
