Atari Ultimate Fight Stick with Trackball User manual
ULTIMATE FIGHT STICK
WITH TRACKBALL
Quick-Start Guide
3B/3B+/3A+
FOR
Raspberry Pi®
INCLUDES RASPBERRY PI & OVER 140 ATARI GAMES!
1
WELCOME!
This guide will get you up and running quickly with your new Ultimate Atari
Fight Stick with Trackball.
What is in the Box:
❏ Ultimate Atari Fight Stick with Trackball
❏ Atari Games Micro SD Card (Pre-Installed in Raspberry Pi)
❏Raspberry PI 3B+
❏6’ HDMI Cable
❏Raspberry Pi Micro USB Power Supply
❏This Quick Start Guide
What You Need to do to Get Up and Running:
(See Photos A-D)
✔Connect the Raspberry Pi to an HDTV with an available HDMI port
✔ You will need to have internet connected to the Raspberry Pi
via Ethernet cable or WiFi. If you choose WiFi, the initial start up
screens will guide you through the process of connecting to your
home WiFi. (If wanting to use ethernet connection, you will need
to run the ethernet cable into the cabinet to the Raspberry Pi)
(See Photo E)
2
A: Unlock the cabinet
with the enclosed key.
Step 1: Connect the Atari Ultimate Fight Stick to Power, and to your TV.
(Optional Ethernet Internet Connection)
B: Open cabinet to access the HDMI
cable and the power adapter plug.
C: Plug one end of the HDMI cable
into the Raspberry Pi.
D: Run both the other end of the
HDMI cable and power cable
through the back of the cabinet.
Plug the HDMI into your TV
and power plug into an outlet.
E: If you would like to connect an
ethernet cable to the Raspberry Pi
for the internet connection here
is where you would plug it in.
Note: Remember to lock the cover
after closing it.
A B
C D
E
3
Tip: Nothing showing up on your monitor? Make sure to select the
appropriate HDMI input on your TV or computer monitor.
Step 3: Upon first boot, you will be presented with a menu and asked
to connect your WiFi. (Note: If you are connected to the internet
via an Ethernet cable, please move to Step 5).
Step 2: Power up your Atari Ultimate Fight stick!
F: To power up the fight stick
there is a toggle switch located
on the back of the cabinet
just inside the opening.
F
4
Once you hit the “OK” button, you will see the WiFi connection window.
Tip: Make sure you click the box to activate the Virtual Keyboard.
5
Step 4: Use the joystick and the buttons to navigate the on screen
prompts.
Use the JOYSTICK
to move the mouse
Use RIGHT TOP & BOTTOM BUTTONS
to select options
6
Step 5: Next, using the Joystick and Buttons, click the check box to install
the Atari Retropie program, and then select the “INSTALL” button and
then select “YES” to begin the installation. (Use the right most top
and bottom buttons on the fightstick).
7
Step 6: Next, the most up to date Atari game image will be downloaded
to your Raspberry Pi. Depending on your internet connection this
could take between 10-30 minutes.
8
Step 7: Once the upload is complete click the “OK” button and your
Raspberry Pi will reboot.
9
Step 8: Once your Raspberry Pi starts to reboot, you will see a screen like
this.
When loading is complete you will see the following screen.
Other Atari Game Console manuals
Atari
Atari CX2600A User manual
Atari
Atari 7800 Pro System User manual
Atari
Atari Flashback AP3228 User manual
Atari
Atari Flashback 6 AR2680 User manual
Atari
Atari 7800 ProSystem User manual
Atari
Atari CX2600 User manual
Atari
Atari 7800 ProSystem User manual
Atari
Atari FLASHBACK2 CX-2600 User manual
Atari
Atari CX2600 User manual
Atari
Atari 5200 User manual
