Asus VG2771A Series User manual

VG2771A Series

LCD Monitor

User Guide

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

Table of contents

Notices......................................................................................................... iii

Safety information ...................................................................................... iv

Care & Cleaning.......................................................................................... vi

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents......................................................................... 1-1

1.3 Assembling the monitor.............................................................. 1-2

1.4 Connect cables............................................................................. 1-3

1.4.1 Rear of the LCD monitor ......................................................................1-3

1.5 Monitor introduction .................................................................... 1-4

1.5.1 Using the Controls button ....................................................................1-4

2.1 Adjusting the monitor.................................................................. 2-1

2.2 Detaching the arm/stand (for VESA wall mount) ...................... 2-2

2.3 Outline dimension........................................................................ 2-3

3.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 Howtorecongure...............................................................................3-1

3.1.2 OSD Function Introduction...................................................................3-2

3.2 Specications............................................................................... 3-7

3.3 Troubleshooting (FAQ)................................................................ 3-8

3.4 Supported Timing List................................................................. 3-9

iii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with manufacturer’s instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department

of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The device may fall, causing serious personal injury or death. To prevent injury, this device

mustbesecurelyattachedtotheoor/wallinaccordancewiththeinstallationinstructions.

Safety information

• Before setting up the monitor, carefully read all the documentation that came with the

package.

• To prevent fire or shock hazard, never expose the monitor to rain or moisture.

• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor

may result in serious physical injury.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your retailer.

• Before using the product, make sure all cables are correctly connected and the power

cables are not damaged. If you detect any damage, contact your dealer immediately.

• Slots and openings on the back or top of the cabinet are provided for ventilation. Do

not block these slots. Never place this product near or over a radiator or heat source

unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated on the

label. If you are not sure of the type of power supply to your home, consult your dealer

or local power company.

• Use the appropriate power plug which complies with your local power standard.

• Do not overload power strips and extension cords. Overloading can result in fire or

electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area

where it may become wet. Place the monitor on a stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long period of time.

This will protect the monitor from damage due to power surges.

• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed computers which

have appropriate configured receptacles marked between 100 ~ 240V AC.

• The socket-outlet shall be installed near the equipment and shall be easily accessible

• If you encounter technical problems with the monitor, contact a qualified service

technician or your retailer.

• Provide an earthing connection before the mains plug is connected to the mains. And,

when disconnecting the earthing connection, be sure to disconnect after pulling out the

mains plug from the mains.

WARNING

• Usage of other than specified head- or earphones can result in hearing loss due to

excessive sound pressures.

• Please confirm the distribution system in building installation shall provide the circuit

breaker rated 120/240V, 20A (maximum).

• If provided with a 3-pin attachment plug on the power cord, plug the cord into a

grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for

example, by attaching a 2-pin adapter. The grounding pin is an important safety

feature.

Declaration of Conformity

This device complies with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

(2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and

RoHS directive (2011/65/EU). This product has been tested and found to comply with the

harmonized standards for Information Technology Equipment, these harmonized standards

publishedunderDirectivesofOfcialJournaloftheEuropeanUnion.

WEEE Symbol Statement

This symbol on the product or on its packaging indicates that this product must not be

disposed of with your other household waste. Instead, it is your responsibility to dispose of

your waste equipment by handing it over to a designated collection point for the recycling

of waste electrical and electronic equipment. The separate collection and recycling of

your waste equipment at the time of disposal will help to conserve natural resources and

ensure that it is recycled in a manner that protects human health and the environment. For

more information about where you can drop off your waste equipment for recycling, please

contactyourlocalcityofce,yourhouseholdwastedisposalserviceortheshopwhereyou

purchased the product.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and

power cord. Follow the correct lifting techniques when positioning the monitor. When

lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by

the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface

with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth

dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use

with the LCD. Never spray cleaner directly on the screen, as it may drip inside the

monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• The screen may flicker during the initial use due to the nature of the fluorescent light.

Turn off the Power Switch and turn it on again to make sure that the flicker disappears.

• You may find slightly uneven brightness on the screen depending on the desktop

pattern you use.

• When the same image is displayed for hours, an afterimage of the previous screen

may remain after switching the image. The screen will recover slowly or you can turn

off the Power Switch for hours.

• When the screen becomes black or flashes, or cannot work anymore, contact your

dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to complete a

task.

CAUTION: Information to prevent damage to the components when trying to

complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

vii

Wheretondmoreinformation

Refer to the following sources for additional information and for product and software

updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS hardware and

software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may have been

added by your dealer. These documents are not part of the standard package.

1-1

ASUS LCD Monitor VG2771A Series

1.1 Welcome!

Thank you for purchasing the ASUS®LCD monitor!

The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter

display, plus a host of features that enhance your viewing experience.

With these features, you can enjoy the convenience and delightful visual experience that

the monitor brings you!

1.2 Package contents

Check your package for the following items:

LCD Monitor

Base

Quick Start Guide

Warranty Card

1x Power Cord

1x HDMI Cable (optional)

1x DP Cable (optional)

• If any of the above items is damaged or missing, contact your retailer immediately.

1-2 Chapter 1: Product Introduction

1.3 Assembling the monitor

To assemble the monitor

1. Align the screw hole on the arm with the bundled screw on the base. Then insert the

base into the arm.

2. Fix the base to the arm by fastening the bundled screw.

*Base screw size: M6 x 17mm

1-3

ASUS LCD Monitor VG2771A Series

1.4 Connect cables

1.4.1 Rear of the LCD monitor

5432 1

HDMI-2

HDMI-1

1. Earphone - out Port

2. DP - in Port

3. HDMI2 Port

4. HDMI1 Port

5. AC-IN Port

This manual suits for next models

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

LG M1950D-PZ owner's manual