Asus ROG SWIFT PG32UCDM User manual

First Edition

February 2024

No part of this manual, including the products and software described in it, may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language in any form or by any means,

except documentation kept by the purchaser for backup purposes, without the express written permission

of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Contents ...................................................................................................... iii

Notices......................................................................................................... iv

Safety information ....................................................................................... v

Care & Cleaning......................................................................................... vii

Takeback Services.................................................................................... viii

Product information for EU energy label................................................ viii

Chapter 1: Product introduction

1.1 Welcome! .................................................................................... 1-1

1.2 Package contents......................................................................... 1-1

1.3 Monitor introduction .................................................................... 1-2

1.3.1 Front view ....................................................................... 1-2

1.3.2 Back view........................................................................ 1-3

1.3.3 GamePlus function.......................................................... 1-4

1.3.4 GameVisual function....................................................... 1-6

1.3.5 Other Function(s) ............................................................ 1-7

Chapter 2: Setup

2.1 Attaching the arm/base ............................................................... 2-1

2.2 Cable management ...................................................................... 2-2

2.3 Detaching the arm/base (for VESA .wall mount)....................... 2-2

2.4 Adjusting the monitor.................................................................. 2-3

2.5 Connecting the cables................................................................. 2-4

2.6 Turning on/off the monitor .......................................................... 2-5

Chapter 3: General instructions

3.1 OSD (On-Screen Display) menu ................................................ 3-1

3.1.1 How to recongure.......................................................... 3-1

3.1.2 OSD function introduction ............................................... 3-2

3.2 Aura............................................................................................. 3-12

3.3 Specicationssummary............................................................ 3-13

3.4 Outline dimensions.................................................................... 3-15

3.5 Troubleshooting (FAQ).............................................................. 3-16

3.6 Supported operating modes ..................................................... 3-17

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian

Interference - Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Réglement sur le matériel brouiller du Canada.

Safety information

• Before setting up the monitor, carefully read all the documentation that came

with the package.

• To prevent re or shock hazard, never expose the monitor to rain or moisture.

• Never try to open the monitor cabinet. The dangerous high voltages inside the

monitor may result in serious physical injury.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or over a

radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supply to your home,

consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power standard.

• Do not overload power strips and extension cords. Overloading can result in

re or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the monitor in

any area where it may become wet. Place the monitor on a stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long period

of time. This will protect the monitor from damage due to power surges.

• Never push objects or spill liquid of any kind into the slots on the monitor

cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate congured receptacles marked between

100-240V AC.

• If you encounter technical problems with the monitor, contact a qualied

service technician or your retailer.

• Adjustment of the volume control as well as the equalizer to other settings

than the center position may increase the ear-/headphones output voltage and

therefore the sound pressure level.

• The adapter is only used for this monitor, do not use it for other purpose. Your

device uses one of the following power supplies:

- Manufacturer: Delta Electronics Inc., Model: ADP-280BB B, ADP-280EB F

• Ensure to connect the power cord to a socket-outlet with earthing connection.

• The supplied power adapter and/or power cable are designed to use with the

product only. Do not use with other products.

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Please check local regulations for disposal of

electronic products.

Prevent Tipping

When using the display, fasten the monitor to a wall using a cord or chain

that can support the weight of the monitor in order to prevent the monitor

from falling.

Cord

M4 or M6 screw

Cord or chain

vii

• Display design may differ from those illustrated.

• Installing must be done by a qualied technician, and please contact

your supplier for more information.

• For the models with net weight >=7kg. Please select the suitable

way to prevent tipping.

• For the models with VESA mount, please use method

, install

the screws with ring to the VESA mount hole, then tie the cord or

chain to the wall. Otherwise, please use method

to tie the cord

or chain to the stand and then x it to the wall.

AEEEyönetmeliğineuygundur

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables

and power cord. Follow the correct lifting techniques when positioning the

monitor. When lifting or carrying the monitor, grasp the edges of the monitor.

Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor

surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed

with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended

for use with the monitor. Never spray cleaner directly on the screen, as it may

drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the previous

screen may remain after switching the image. The screen will recover slowly or

you can turn off the Power Switch for hours.

• When the screen becomes black or ashes, or cannot work anymore, contact

your dealer or service center to x it. Do not repair the screen by yourself!

viii

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying

to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

Wheretondmoreinformation

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may have

been added by your dealer. These documents are not part of the standard

package.

3. About Flicker

https://www.asus.com/Microsite/display/eye_care_technology/

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest

standards for protecting our environment. We believe in providing solutions for

our customers to be able to responsibly recycle our products, batteries and other

components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling

information in different region.

Product information for EU energy label

PG32UCDM

1-1ASUS PG32UCDM Series OLED Monitor

1.1 Welcome!

Thank you for purchasing the ASUS®OLED monitor!

The latest widescreen OLED monitor from ASUS provides a broader, brighter and

crystal-clear display, plus a host of features that enhance your viewing experience.

With these features, you can enjoy the convenience and delightful visual

experience that the monitor brings to you!

1.2 Package contents

Check your package for the following items:

OLED monitor

Monitor base

Quick start guide

Warranty card

Power adapter

Power cord

HDMI cable (optional)

DisplayPort cable (optional)

USB Type-A to Type-B cable (optional)

USB Type-C cable (optional)

ROG welcome card with envelope

ROG Wall mount kit

ROG sticker

ROG pouch

If any of the above items is damaged or missing, contact your retailer

immediately.

If you need to replace the power cord or the connection cable(s), please contact

ASUS customer service.

1-2 Chapter 1: Product introduction

1.3 Monitor introduction

1.3.1 Front view

3 4

1. Power indicator

• The color denition of the power indicator is as the below table.

Status Description

Red ON

OFF OFF

Amber Standby mode/No signal

Orange ashing Pixel cleaning

2. Close button

• Turns on the monitor when the monitor enters standby mode or displays

the “NO SIGNAL“ message.

• Press to activate the Input Select hotkey. To change the hotkey function,

go to the MyFavorite > Shortcut > menu.

• Press this button to exit the OSD menu when the OSD menu is

activated.

3. Navigation (5-way) button:

• Turns on the monitor when the monitor enters standby mode or displays

the “NO SIGNAL“ message.

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

LG M1950D-PZ owner's manual