Asus AAEON UP Squared Pro Edge User manual

Other Asus Computer Hardware manuals

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

AAEON TECHNOLOGY EUROPE BV - Confidential

UP Squared Pro Edge

M.2 2230 WiFi Installation SOP

Revision: A1.0

Date: May. 2022

Focus • Agility • Competitiveness

www.aaeon.com

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 1:

•Unscrew and disassemble the bottom and front I/IO chassis cover

Bottom Side Front I/O Side

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 2:

•Remove the power button cable and pull the cable out

Front I/O Side

*Lightly out-side-in push the

plastic parts to release the

power button.

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 3:

•Unscrew the screws for GPIO (2pcs) and pull the cable out.

Rear I/O Side

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 4:

•Break the antenna holes on the chassis (left and right side)

Left Side Right Side

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 5:

•Unscrew the screws (4pcs) fixing the PCBA and turn the PCBA over so the

bottom side of the PCBA is facing up.

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 6:

•Install the WiFi module on M.2 2230 E Key slot and the coaxial cable. The cables are

arranged as shown in the figure below (the cables are routed towards the right side

of the board). Connect and glue the ipex connector of the coaxial cable to the WiFi

module pitch.

Glue the ipex connect to the module

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 7:

•Turn the PCBA back, so that the IO side is facing up again (the power button cable is

routed to the top of the board). Assemble the SMA Jack of coaxial cable to the

chassis, and then lock the spacer and nut.

Power button cable

AAEON TECHNOLOGY EUROPE BV - Confidential

Step 7:

•Install the external antenna and restore the parts removed from steps 5>3>2>1

AAEON TECHNOLOGY EUROPE BV - Confidential

For more information:

https://up-board.org/

Community Support

UP Community

Join our developer community and share your knowledge about UP. Stuck with your project?

Get help from one of the hundreds of industry professions that are already using UP!

UP Wiki

Learn more about UP with code and project examples, tutorials and OS installation guides

UP Downloads

Download everything you need to start your project. Our download area includes drivers, OS

image, 2D/3D drawings, environment test reports, certifications and more.