Assa Abloy HES 5000 Series Manual

1 of 4

5000 | 5300 Series

Electric Strikes

Installation & Operating Instructions

Product Contents

A 5000/5300 Electric Strike Body

B Trim Enhancer (with screws)

C 12 & 24 Volt Pigtails

Electrical Specifications

Electrical Ratings For Solenoid

CONTINUOUS DUTY INTERMITTENT DUTY*

12 VDC 24 VDC 12-16 VAC 24 VDC

Resistance in Ohms 50 200 50 200

Amps .24 .12 .24-.32 .12

Solenoids are rated at +/- 10% indicated value.

*10% max duty cycle (2 min. max on time) Indoor use only

Minimum Wire Gauge Requirements

SOLENOID VOLTAGE

12 VDC 24 VDC

200 feet or less 18 gauge 20 gauge

200 – 300 feet 16 gauge 18 gauge

300 – 400 feet 14 gauge 16 gauge

Diagram 1: Product Components

CAUTION! Before connecting any device at the installation site, verify input voltage using a multimeter.

Many power supplies and low voltage transformers operate at higher levels than listed. Any input voltage

exceeding 10% of the solenoid rating may cause severe damage to the unit and will void the warranty.

2 of 4

Diagram 2 12 V to 24 V Conversion

Prepare Strike

1. SELECT the appropriate Plug In Connector that

matches system power and electrically connect as

illustrated in Diagram 2.

FOR 12 V AC/DC OR 16 V AC, the pigtail marked

“12 VDC” should be used.

FOR 24 V AC/DC, the pigtail marked

“24 VDC” should be used.

2. VERIFY that the strike is in the correct mode of

operation. This unit ships in Fail Secure mode. If

you need to convert to Fail Safe see Diagram 4.

3. If using LATCHBOLT MONITOR (LBM)

see Diagram 3 to complete wiring.

Prepare Frame

1. PREPARE frame using appropriate

template for your faceplate.

2. ATTACH faceplate to strike body.

Finish Installing

1. CONNECT wires from the power source to the strike.

2. INSTALL the electric strike unit in jamb cutout using

the screws provided with the faceplate option kit.

LBM WIRING

White Common

Orange Normally Open

Green Normally Closed

Convert Mode

1. LOOSEN the two #2-56 screws located on the back

of the strike as shown, but do not remove them.

2. MOVE screws from the top of the hole

(Fail Secure position) to the bottom hole

(Fail Safe position) as shown above.

3. TIGHTEN screws.

Verify

4. VERIFY the strike is now in the Fail Safe operation

mode. If the strike still operates as Fail Secure, be

sure screws are fully seated in the bottom position.

WHITE

ORANGE

GREEN

RED

RED/GREEN

BLACK

VIOLET

RED

BLACK

VIOLET

RED/GREEN

IF CONNECTOR IS MISSING

(+ 12 VDC)

(- NEG)

(+ 24 VDC)

(- NEG)

ELECTRIC

STRIKE

ELECTRIC

STRIKE

CONNECT

TOGETHER

CONNECT

TOGETHER

CONNECT

TOGETHER

Diagram 3 Latchbolt Monitor

Diagram 4 Fail Safe Conversion

Fail Safe Conversion

Installation Directions

Fail Safe Position

Fire rating only applies to Fail Secure Units.

Conversion to Fail Safe negates fire rating on 5300.

3 of 4

ANSI Metal Jamb Installations

501 Faceplate

Aluminum Jamb Installations

501A Faceplate

Aluminum Frame Installations

502 Faceplate

Diagram 5 501 Faceplate

4-7/8" x 1-1/4" Square Corner

Diagram 6

501A Faceplate

4-7/8" x 1-1/4"

Radius Corner

Diagram 7

502 Faceplate

7-15/16" x 1-7/16"

Radius Corner

3-3/8"

[85.7mm]

1-1/4"

[31.8mm]

4-7/8"

[124mm]

11/16"

[17.5mm]

[2.3mm]

3/32"

1 -1/4"

[31.8mm]

4 -7/8"

[124mm]

4 -1/8"

[104.8mm] 1 -7/16"

[36.6mm]

1-1/4"

[31.8mm]

4-7/8"

[124mm]

3-3/8"

[85.7mm]

11/16"

[17.5mm]

3/32"

[2.3mm]

4 -7/8"

[124mm]

4 -1/8"

[104.8mm]

1 -7/16"

[36.6mm]

1 -1/4"

[31.8mm]

R 1/8"

[3mm]

3-3/8"

[85.7mm]

11/16"

[17.5mm]

3/32"

[2.3mm]

1 -7/16"

[36.5mm]

7-15/16"

[201.6mm]

1-7/16"

[36.6mm]

7-15/16"

[201.6mm]

7-7/16"

[189mm]

1-7/16"

[36.6mm]

R 3/16"

[4.1mm]

4 of 4

Printed in the U.S.A.

Patent pending and/or patent www.assaabloydss.com/patents

permission of Hanchett Entry Systems, Inc. is prohibited. 3019006.003_5

Warranty

For information on warranty coverage and replacement

options, please visit hesinnovations.com/warranty

techsupport.hes@assaabloy.com

800 626 7590 | hesinnovations.com

Aluminum Frame Installations

503 Faceplate

Wood Frame Installations

504 Faceplate

Diagram 8

503 Faceplate

6 -7/8" x 1-1/4"

Radius Corner

Diagram 9

504 Faceplate

10" x 1-3/8" Radius

Corner & Flat

6 -7/8"

[174.3mm]

6 -1/8"

[155.6mm]

1-1/4"

[31.8mm]

1 -7/16"

[36.6mm]

R 3/16"

[4.1mm]

3-3/8"

[85.7mm] 6 -7/8"

[174.3mm]

11/16"

[17.5mm]

3/32"

[2.3mm]

1-1/4"

[36.5mm]

10"

[254mm]

1-3/8"

[34.9mm]

3-3/8"

[85.7mm]

11/16"

[17.4mm]

3/32"

[2.3mm]

1-3/8"

[34.9mm]

10"

[254mm]

8 -1/2"

[215.6mm]

8 -1/2"

[215.6mm]

1 -7/16"

[36.6mm]

1 -3/8"

[34.9mm]

R 1/8"

[4mm]

Scan QR code to find additional info, certifications and listings.

5000 5300

Other manuals for HES 5000 Series

This manual suits for next models

Table of contents

Other Assa Abloy Lock manuals

Assa Abloy

Assa Abloy KESO KEK i-handle S User guide

Assa Abloy

Assa Abloy OneSystem Espagnolette User manual

Assa Abloy

Assa Abloy Yale 5300LN Series Quick start guide

Assa Abloy

Assa Abloy 836S User manual

Assa Abloy

Assa Abloy OneSystem 509N Installation instructions

Assa Abloy

Assa Abloy Yale Real Living YRD210-ZW Technical specifications

Assa Abloy

Assa Abloy OneSystem N7 Series Installation guide

Assa Abloy

Assa Abloy Corbin Russwin TL3700 Series User manual

Assa Abloy

Assa Abloy HES 5000 Series User manual

Assa Abloy

Assa Abloy Sargent SN Series User manual

Assa Abloy

Assa Abloy SARGENT Profile LK Series Installation manual

Assa Abloy

Assa Abloy Sargent 6500 Instruction Manual

Assa Abloy

Assa Abloy Securitron Vista V2M1200 Series User manual

Assa Abloy

Assa Abloy Sargent ELR Series User manual

Assa Abloy

Assa Abloy Yale Smart Latch User manual

Assa Abloy

Assa Abloy Abloy EL590 User manual

Assa Abloy

Assa Abloy Sargent 8200 Series User manual

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series User manual

Assa Abloy

Assa Abloy Abloy EL420 User manual

Assa Abloy

Assa Abloy 9800 TCNE1 Series User manual

Assa Abloy

Assa Abloy SARGENT 1655 User manual

Assa Abloy

Assa Abloy Yale Smart Latch User manual

Assa Abloy

Assa Abloy SARGENT FM7300 Series User manual

Assa Abloy

Assa Abloy 841C User manual

Popular Lock manuals by other brands

Magic

Magic 105 manual

Gantner

Gantner GAT NET.Lock 7020 System Installation, configuration & operation

Wittkopp

Wittkopp Insys 7202 manual

Dorma

Dorma Studio Classic Installation instruction

Securam

Securam ECSL-601 quick start guide

Sudhaus

Sudhaus 3003 operating manual

Safety 1st

Safety 1st 48517 user guide

Pado

Pado FDS-10 user manual

Esco

Esco systeQ Series installation instructions

COMPX

COMPX National D8951 instruction sheet

secureo

secureo Key Box instruction manual

Stock Loks

Stock Loks C8713 instruction sheet

COMPX

COMPX 1T-058 Information

Auslock

Auslock T11 user manual

ELCOM

ELCOM 7205 Operating instruction

Stealth SAFES

Stealth SAFES ShadowVault Instructions & Troubleshooting

Knox

Knox KeySecure 5 Admin & user guide

Kwikset

Kwikset 48334/01 Quick installation guide