Ask Proxima Impact 64 User manual
USER
GUIDE
IMPACT 64
801.200A
USG/064/AE-A
14.06.95
Not the actual front page
USER GUIDE
IMPACT 64
USER GUIDE LCD PANEL
2
USER GUIDE LCD PANEL
3
TABLE OF CONTENTS
INTRODUCTION .....................................................................................5
MAIN FEATURES....................................................................................5
SUPPLIED MATERIAL.............................................................................6
OPTIONAL MATERIAL............................................................................6
SETTING UP THE LCD PANEL ...............................................................7
COMPUTER...............................................................................8
MOUSE......................................................................................9
USING THE LCD PANEL....................................................................... 11
REMOTE CONTROL................................................................ 11
FRONT PANEL ........................................................................ 13
CONNECTORS........................................................................ 13
FEATURES............................................................................................ 14
PRACTICAL HINTS AND TIPS............................................................... 18
MAINTENANCE..................................................................................... 20
SERVICE............................................................................................... 20
TECHNICAL DATA ................................................................................ 21
CONNECTORS ..................................................................................... 24
FCC STATEMENT................................................................................. 25
ENVIRONMENTAL STATEMENT........................................................... 26
SERVICE INFORMATION...................................................................... 27
CONNECTION LAYOUT........................................................................ 28
(Foldout Page)
USER GUIDE LCD PANEL
4
This publication is printed on recycled paper.
The information contained in this user guide is preliminary, and the products described
herein are subject to change without prior notice.
The symbols and are used in this publication to indicate
Warning and Note respectively.
USER GUIDE LCD PANEL
5
1INTRODUCTION
The LCD panel is a state of the art projection device that can be connected
to most computers.
The ability to display a multitude of greyshades simultaneously, makes it
the ideal choice for presenting computer generated text and graphics.
Applications include presentations, software training, educational use,
advertising, information boards and other situations where a small or
large audience shares information.
2MAIN FEATURES
-64 greyshades
-BatMouse™, infrared remote mouse
-User settings memorized
-Individual settings for all modes
-Correct VGA text
-Infrared remote control
- Housing footprint fits OHP glass exactly
-Low weight
-Intelligent Safecool system
-False light blocking
-4 meters Y-cable
USER GUIDE LCD PANEL
6
3SUPPLIED MATERIAL
A complete set includes the following components :
1. LCD Panel 8. Power -5, 12, 5 V
2. VGA-Cable 9. Power Cable
3. Cable-Adapt. MACII mon 10. BatMouse Remote Control
4. Cable-Adapt. MACII comp. 11. Batteries
5. Mouse Cable 12. Attachè Case
6. Mouse Adapter PC 13. User Guide
7. Mouse Adapter Mac
4OPTIONAL MATERIAL
Optional cables and adapters are available for special computer sources.
USER GUIDE LCD PANEL
7
5SETTING UP THE LCD PANEL
Switch off all equipment before connecting the components. Be aware of
static electricity that may build up, especially in the dry season and when
operating on synthetic carpets. Discharge any static electricity by touching
a metallic surface before you start.
Place the LCD panel on top of a transmissive overhead projector (OHP).
Select a high intensity type projector, for instance 400W. Best results are
obtained in a dimmed room with no direct sunlight shining in. Using the
LCD panel on some metal halide OHP’s may cause visible flicker. This will
not harm the LCD panel.
The following are guidelines for first time set-up:
•Connect the cables and power supply as described in the rear foldout
page (see Connection Layout).
•Attach power to the LCD panel, turn the overhead projector and
computer on.
Do not switch on the OHP unless the LCD panel is powered, as
this may cause permanent damage.
If you are going to use a mouse, make sure to power the LCD panel first.
For more information on set-up see the following sections on Computer
and Mouse.
USER GUIDE LCD PANEL
8
5.1 COMPUTER
Connect the LCD panel, computer, monitor and power supply as shown in
the rear foldout.
Connect the VGA cable (1) between the LCD panel and the computer. Use
the Y-split on the computer end to connect the monitor.
If you have a Macintosh, EGA, CGA or NEC computer, insert applicable
adapters (4) and (5) as described in the table below.
Connect the power supply to the LCD panel (3).
APPLICABLE ADAPTERS :
COMPUTER ADAPTER
VGA/SVGA None
EGA/CGA* EGA/CGA (option)
MACII c../v../LC/ Quadra/Powerbook/ Duo etc. MACII (640 x 480)
(included)
NEC 9801 NEC 9801(option)
* Computer only, monitor not available
TO SET UP FROM THE BATMOUSE REMOTE CONTROL :
STEP OPERATION
1Press RESET for default settings
2Adjust TUNE for a stable image
3Press POSITION, then use cursor keys to position the image
4Adjust CONTRAST as desired
USER GUIDE LCD PANEL
9
5.2 MOUSE
See the rear foldout when setting up.
Connect the mouse to the LCD panel using the appropriate adapter (6) as
described in the table below. Then connect the adapter (6) to the mouse
cable at the computer end. Finally, connect the mouse cable to the LCD
panel (2).
For the computer to recognise the mouse, connect all cables and
power on the LCD panel before power is applied to the
computer.
A Y-split is provided with the PC and MAC adapters that enables parallel
use of the local computer mouse and the remote mouse.
The local and remote mice should not be operated
simultaneously, as this may lead to unpredictable positioning of
the mouse pointer.
If you have a Macintosh, make sure to connect your Mac mouse adapter
via the keyboard.
The optional PS/2 adapter does not have a Y-split.
APPLICABLE ADAPTERS :
MOUSE ADAPTER
Microsoft 2 key compatible (9 pin serial port) PC
PS/2 compatible mouse PS/2
Macintosh ADB-bus mouse MAC
USING THE BATMOUSE :
STEP OPERATION
1Control mouse pointer directly with the cursor keys
2Press LEFT to activate (emulates the left mouse key)
3Press DRAG to tag an object, move it using the cursor keys,
then press DRAG again (or wait 5 seconds) to release the
object.
4Press RIGHT if your application requires emulation of the
right mouse key.
The centre key of three-key mice is not emulated.
Table of contents
Other Ask Proxima Projector manuals
Ask Proxima
Ask Proxima C170 User manual
Ask Proxima
Ask Proxima M2+ User manual
Ask Proxima
Ask Proxima C350 User manual
Ask Proxima
Ask Proxima Impact 21 User manual
Ask Proxima
Ask Proxima Impression 860 User manual
Ask Proxima
Ask Proxima C440 (DP8400X) User manual
Ask Proxima
Ask Proxima A6 Compact User manual
Ask Proxima
Ask Proxima S3000 Series User manual
Ask Proxima
Ask Proxima M9 User manual
Ask Proxima
Ask Proxima C1 Compact User manual
Ask Proxima
Ask Proxima Impression 880 User manual
Ask Proxima
Ask Proxima C110 User manual
Ask Proxima
Ask Proxima M8 User manual
Ask Proxima
Ask Proxima Impression A6+ User manual
Ask Proxima
Ask Proxima Impression 970 User manual
Ask Proxima
Ask Proxima M1 User manual
Ask Proxima
Ask Proxima DLP Projector User manual
Ask Proxima
Ask Proxima C1 Compact User manual
Ask Proxima
Ask Proxima M5 User manual
Ask Proxima
Ask Proxima M9 User manual
