ASD Standard Series User manual
LED Area and Roadway light
Standard Series
WebSite: www.asd-lighting.com Fax: 339-502-8970
ASD Area and Roadway lighting with dusk-to-dawn photocell provides optimal illumination for side doors, backdoors,
garages, sheds etc.
Keep your property secure with these ultra-bright security lights, designed to save on electricity bills while
providing exceptional surface coverage. The 50W LED barn light is the perfect replacement for the 100W MH
traditional lighting xture.
Our new LED Area and Roadway light will turn on automatically when the environment gets dark
without the user having to ipping the switch.
▶Twist-lock photocell included
▶Mounts directly or with mounting arm (included)
▶Durable Die-Cast Aluminum Housing
▶No maintenance
▶Operating temperature of -40℉ to 104℉
▶Wet location IP65
▶L-70 Life > 54,000 hrs
▶cULus certied
▶DesignLights Consortium (DLC) listed
(Classication: Standard)
▶5 Year warranty
FEATURES AND BENEFITS:
ORDERING MATRIX:
Family Watts Dimmable CCT Photocell
ASD-ARL XX N XX PC
LED Area and Roadway light 50 = 50 W N= Non-dimmable 3,000 K
4,000 K
5,000 K
6,000 K
110lm
HIGH LUMINOUS
EFFICIENCY
w
LED AREA AND ROADWAY LIGHT:
Model Watts Dimming Compatible CCT Lumens Dimensions (LxWxH)
ASD-ARL-50N30-PC 50 No 3,000 K 5,326 lm 24"x 9 1/2"x 21 1/4"
ASD-ARL-50N40-PC 50 No 4,000 K 5,326 lm 24"x 9 1/2"x 21 1/4"
ASD-ARL-50N50-PC 50 No 5,000 K 5,326 lm 24"x 9 1/2"x 21 1/4"
ASD-ARL-50N60-PC 50 No 6,000 K 5,326 lm 24"x 9 1/2"x 21 1/4"
LED Area and Roadway light
Standard Series
WebSite: www.asd-lighting.com Fax: 339-502-8970
PRODUCT SPECIFICATIONS:
Construction & Materials
Lens PC
Reector Aluminum
Housing Aluminum
Finish Bronze
Weight 5.94 lbs (2.7 kg)
Optical System
Luminous Flux 5,326 lm
Color Temperature 3,000 K, 4,000 K, 5,000 K, 6,000 K
CRI >80
Environmental System
Work Environment Suitable for Wet Locations, IP65
Operating Temperature -40℉ to 104℉ (-40℃ to 40℃)
L-70 Life > 54,000 hrs
Electrical System
Input Voltage 100~277V AC 50/60 Hz
Max input current 0.6 A
O State Power 0 W
Power Consumption 50 W
Power Factor ≥ 0.95
Output voltage 40-66 V
Max output current 750 mA
LED Area and Roadway light
Standard Series
WebSite: www.asd-lighting.com Fax: 339-502-8970
50 W
9.5” (240 mm)
7” (177.8 mm)
21.25” (540 mm)
24” (610 mm)
13.5” (342 mm)
LED Area and Roadway light
Standard Series
WebSite: www.asd-lighting.com Fax: 339-502-8970
WARNING
RISK OF PERSONAL INJURY – READ and follow all WARNINGS and installation instructions.
Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this
product.
Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with
the construction and operation of the product and the hazards involved.
Risk of Fire: Minimum 90°С supply conductors. Consult a qualied electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.
AVERTISSEMENT
RISQUE DE BLESSURES - Lisez et suivez toutes les MISES EN GARDE et les instructions d’installation.
Tenir ou fournir au propriétaire pour référence future.
Risque de coupures: Porter des gants pour éviter les coupures ou des écorchures lors du retrait du carton, de la manutention,
l’installation et le maintien de ce produit.
Risque de choc électrique: Ce produit doit être Installé conformément au code d’installation applicable par une personne
familiarisée avec la construction et l’exploitation du produit et les risques impliqués.
Risque d’incendie: minimum 90° С Alimentation conducteurs. Consultez un électricien qualié pour assurer le bon conducteur de
circuit de dérivation.
ASD® n’assume aucune responsabilité pour les réclamations découlant d’une installation inadéquate ou négligente ou de la
manipulation de ce produit.
ADVERTENCIA
RIESGO DE LESIONES PERSONALES – Lea y siga todas las advertencias e instrucciones de instalación.
Mantener о proporcionar al propletario para referencia futura.
Riesgo de cortes: Use guantes para evitar cortes о abrasiones en la eliminación de la caja, manejo, instalación y mantenimlento de
este producto.
Riesgo de choque eléctrico. Este pfoducto debe ser instalado de acuerdo con el código de Instalación uplicable en que una persona
familliarizada con la construcciôn y operación del producto y los riesgos Involucrados.
Riesgo de Incendio: Minimo 90° С los conductores de suministro. Consuite a un etectricista calicado para asegurarse el conductor
correcto del circuito.
ASD® no asume ninguna responsabilidad por reclamaciones derivadas de uno instaiación inadecuada о neggente о la manipuloción
de este producto.
LED Area and Roadway light
Standard Series
WebSite: www.asd-lighting.com Fax: 339-502-8970
INSTALLATION GUIDE
IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation.
▶Make sure that the supply voltage corresponds to the rated product voltage.
▶The product must be installed by a qualied electrician in accordance with the National Electrical Code and corresponding
local codes.
▶If the product is damaged, do not use it.
▶All wiring connections should be capped with UL approved wire connectors.
▶This xture is intended to be connected to a properly installed and grounded UL listed junction box with suitable strain relief
means for power cord. The junction box is not included, should be purchased separately.
To install the
control, rmly
place it onto the
receptacle base
located on the top
of the luminaire
unit and twist it
clockwise until it
locks into place.
HARDWARE INCLUDES:
INSTALLATION STEPS
Mounting
hardware
Photo Control
1 pc.
Mounting bracket
1 pc.
Cord protection bracket
1 pc.
Extension arm
1 pc.
Photocell
CONNECTION DIAGRAM
DRIVER
L
N
G
L
N
G
L (live/hot)
connect black
Ground
connect green
FIXTURE
N (neutral)
connect white
Power connector
120~277V 50/60 Hz
LED Area and Roadway light
Standard Series
WebSite: www.asd-lighting.com Fax: 339-502-8970
INSTALLATION STEPS
FIX TO MOUNTING SURFACE
WITH AN ARM:
DIRECTLY FIX TO MOUNTING SURFACE:
1. Fix cord protection bracket by two hex socket screws.
2. Use expansion bolts to secure the xture on mounting
surface.
3. Keep enough length wires to ensure adjusting angle
unhindered. Connect wires into wiring terminal;
white wire to “Neutral” terminal, black wire to “Live”
terminal, green wire to “Ground” terminal; and x
them by screws.
1. Use supplied nut and bolt to assemble arm as shown
2. Secure clamp onto the base of the arm, as shown.
Fix it with bolt and nut. Ensure that the arm does not
rotate.
3. Install the clamp with arm on the wall with four
screws.
4. Run extension wiring through the arm. Connect the
wire in same color (correspond to wire N, L and G)
together with nut wire connectors. Put one end of
the tube into the U-slot, and then x the tube with
sliptter by two hex socket screws. Please make sure
that the tube will not rotate.
1.
3.
2.
3.34” (84.9 mm)
2.52” (64 mm)
G (Green)
B (Black)
N (White)
1. 2. 3.
4.
L (Black)
N (White)
G (Green)
This manual suits for next models
5
Table of contents
Other ASD Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
