Arrow NORMA JEAN 350 User manual

NORMA JEAN

SEWING MACHINE CABINET

OWNER’S MANUAL

Where Creativity Meets Color!

Assembly Instructions

IMPORTANT: Please read these instructions before assembling!

Piece of cardboard and styrofoam need to be saved for Step 14!

Model Numbers:

350 Oak

351 White

352 Cherry

353 Black

Thank you for your purchase of an Arrow Sewing Cabinet!

Thank you for your purchase! Our products have a three-year warranty from the date of shipment

from our facility that covers manufacturer defects plus a 15 day warranty for any shipping

damages.

--get a bonus 1 year of warranty!

The warranty covers parts and freight for the rst year and parts only for any claims after the rst

year. Freight after the rst year of ownership will be the responsibility of the customer.

The warranty covers all manufacturer defects but does not cover damage caused by abuse, mis-

use, alteration, poor assembly, accident or neglect of the product. The warranty does not cover

damage as a result of moving the cabinet fully loaded or damage caused by moving the cabinet

with locked casters.

Under the terms of this warranty the repair and replacement of any parts shall be at the discretion

of the company or their designated representatives.

Replacement Part Shipping Policy:

All replacement parts shipping prepaid freight must ship out at the same time. Please help us in

this endeavor by reviewing ALL parts in ALL boxes for damage before calling or e-mailing us to

report damage. Warranty covers shipping cost of replacement parts 1 time only within the rst year

of ownership. Additional warranty parts requests will be shipped at the customer’s expense.

VISIT WWW.ARROWCABINETS.COM FOR ASSEMBLY VIDEOS, PICTURES AND FREQUENTLY

ASKED QUESTIONS.

If you have any questions, please call or email us at:

1-800-533-7347

cs@arrowcabinets.com

{WARNING TRIANGE} WARNING:

CHOKING HAZARD – Small parts. Not for children under 3 years.

Please retain this information for future reference.

Check out our website for pictures and frequently asked questions at:

www.arrowcabinets.com

READ THIS PAGE FIRST

ARROW WARRANTY

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 1

Left Leaf

Shelf

Right Leaf Supports

Front

Drawer Front x4

Drawer Back x4

Drawer Side Right x4

Drawer Side Left x4

Drawer Bottom x4

Platform

Top

Left Leaf Supports

Left Side Panel

Partition

Back

If any of these parts arrived damaged, please call us at

1-800-533-7347 and we will send a replacement part out.

For additional strength dab wood glue on tip of screws

before attaching.

Compartment Back

Right Leaf

NOTE: To assure proper handling of replacement parts

please include the following information:

• Model Number of Unit - 350 (Oak)

351 (White)

352 (Cherry)

353 (Black)

• Production ID Number

• Number of Part Required

• Your Name, Address, and Phone Number

Notice to Customer:

Before beginning assembly, remove all parts from

the carton. Please review the illustrations below to

determine that all parts are Included.

For assembly or operating assistance, or to report any

missing or damaged parts, you may call or write to:

cs@arrowcabinets.com

1-800-533-7347

Arrow Cabinets

P.O. Box 307, Delavan, WI 53115

TO ORDER REPLACEMENT PARTS CALL

1-800-533-7347

Parts are labeled with capital letters. To reference letters,

turn to the Wood Parts List in the back of your manual.

Wooden Materials

Door

Compartment BottomRight Side Panel

Metal Handle x4

#8/32x3/4”

Handle Bolts x8

10mm Hex Nuts x8 Washers x8

Drawer Connecting

Bolts x8

Drawer

Cams x8

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 2

Hardware Included

Tools required

Drawer Stoppers x4

Door Hinge x3

Strike Plate x1

Door Magnet x1

Door Knob x1

Metal Dowels x4

#8x5/16”

Flathead Screws x4

#4x1/2”

Gold Flathead Screws x21 #4x1/2”

Screw x2

#5x5/8”

Bronze Flathead Screw x1

#7x5/8”

Flathead Screw x16

#6x5/8”

Gold Panhead Screws x2

#8x1/2”

Panhead Screws x16

#8x5/8”

Panhead Screws x4

#7/32x1”

Door Knob Bolt x1

Connecting Bolts x25

Cams x25 Drawer Runners x8

10mm Hex Bolt x8

#6x1”

Flathead Screw x32

#10x1-1/4”

Flathead Screw x16

Wood dowel x8

Note: Screws are included in the bag of parts they will be

used with.

*Items not drawn to scale.

Phillips Screwdriver

Wrench 10 mm

Hammer

Electric screwdriver

Plastic Tray Large x1

Tote Tray x1

Plastic Tray Small x3

Left Wing x1 Right Wing x1

Round Magnet x2 Bronze Strike

Washers x2

Seff Sticking

Rubber Tab x2

Locking

Casters x2

Non-locking

Casters x3

Socket Wrench 10 mm

Support Hinge x4

Caster Insert x5 Caster Clips x5

180°

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 3

Understanding How the “ARROW-LOC” Cam Fastener Works

Cabinet Assembly

Position bolt in

pre-drilled hole and

turn until tight.

Press cam Into pre-drilled

hole until flush with surface.

Insert bolt through pre-drilled

hole in edge of panel.

To lock, rotate cam

until tight, using

screwdriver.

ARROW TOWARDS

HOLE IN EDGE!

FIG. 1A

FIG. 1

Partition

(viewed from left)

Partition

(viewed from right)

Step 1. Place Top (A, B & C), Partition (F) and

Left and Right Sides (D & E) on a flat protected

surface (to prevent scratching of parts) and thread

connecting bolts (25 total) into pre-drilled holes

(as shown In FIG. 1). Turn Partition (F) over and

thread in the remaining bolts as indicated below

(FIG. 1A).

Connecting Bolts x25

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 4

FIG. 2

Step 2. Install Cams (25 total) Into the holes

provided in the cabinet parts shown below, pushing

a cam into each hole until flush with the surface.

The arrow on the Cams should be turned (using a

regular screwdriver or Allen Key Provided) to face

the hole In each edge where the Connecting Bolts

will enter. See top of page 3 for installation of cams.

Cams x25

DO NOT OVERTIGHTEN #6x1”

Flathead Screws. Make sure

the screw heads are flush

with plastic.

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 5

Step 3. Attach the plastic brown Drawer Runners

by using #6x1” Flathead Screws (x32) (as shown In

FIG. 4).

Step 4. Attach the Magnet to the Partition (F) by

using #6x5/8” Screws (x2). Be sure to keep the

magnet Strikes (metal) facing towards the front

edge of the Partition (F) (as shown In FIG. 4.).

FIG. 3

FIG. 4

Screw drawer stop (4) total into Right side panel

(E) above drawer runners using #6x5/8” flathead

screw (x4). DO NOT tighten the screws completely,

leave 1/4” for up and down swivel of the drawer

runner. Insert Metal dowel (x4) into pre-drilled

hole next to drawer stops.

#6x1”

Flathead Screw x32

DO NOT OVER TIGHTEN. If the brown plastic around

the screw holes turns white, you have over tighten

and the drawers won’t fit!

Metal Dowels x4

Door Magnet x1

#6x5/8”

Gold Panhead Screws x2

#8x5/16”

Flathead Screws x4

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 6

Step 5. Attach the plastic Trays (x4) to the Door

(O) by inserting the #8x1/2” Panhead Screws

(x16) into the Door (0). The (3) smaller trays are

mounted in the three top rows of predrllled holes,

Step 6. Attach Support Hinges (x4) to Right and

Left Supports (L & K) with #7x518” Flathead

Screws (x8); Insert Round Magnets (x2) into holes

in Leaf Supports (L & K) (as shown In FIG. 6).

FIG. 5

FIG. 5A

FIG. 6

#4x1/2”

Bronze Flathead Screw x1

with larger tray mounted in bottom row. Attach

Magnet Strike Plate wtth #5x5/8” Flathead Screw

(x1).

Attach (3) Door hinges to Door (O) with #4x1/2”

Flathead Screws (x12) (as shown In FIGS. 5 and 5A).

#8x1/2”

Panhead Screws x16

#4x1/2”

Gold Flathead Screws x12

Strike Plate x1

Door Hinge x3

Note: Long Side to Door

Cover the magnet with a wood block and tap hard

to get magnet in the hole. Attach rubber tabs to

Leaf Supports (L & K), make sure and place tab on

opposite edge from round magnet!

Plastic Tray Large x1

Plastic Tray Small x3

Support Hinge x4

Round Magnet x2

Wood block

Seff Sticking

Rubber Tab x2

#7x5/8”

Flathead Screw x8

180°

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 7

Step 7. Place Caster Clips (x2), Inserts (x2),

Locking Caster (x1), and Non-Locking Caster (x1)

into Left Side (D) (as shown In FIG. 7 below). It is

important to put caster clip on first and then tap

insert into caster clip opening. Attach Shelf (I)

first to help support the Back (G) when placed

FIG. 7

on Left Side (D). Attach the Back (G) to Left Side

(D) by guiding Back (G) onto Connecting Bolts in

Left Side (D) (as shown In FIG. 7), turn Cams to

the Locked Position. Attach Front (N) by guiding it

onto the appropriate Bolts in the side, and turn the

Cams to the Locked Position.

Remember to tighten the

cams down on ALL pieces

once completed!

Taped edge

Locking

Caster x1

Caster

Non-locking

Caster x1

Caster Insert x2

Caster Insert

Caster Clip x2

Caster Clip

Place 1st Place 2nd

Place 3rd

VERY IMPORTANT TO PLACE IN THIS ORDER!

Assembly Instructions

Norma Jean Sewing Machine Cabinet Page 8

Step 8. Place or tap Caster Clip (x1), Insert (x1)

and Non-Locking Caster (x1) into the Partition (F)

(as shown In Fig.8. below).

* It is VERY important to put caster clip on first

and then tap caster insert into clip opening.

FIG. 8

Align the Connecting Bolts in Partition (F) with

corresponding holes in Front (N), Shelf (I) and

Back (G). Now, making sure the Partition (F) is

completely on the Connecting Bolts, turn Cams to

Locked Position.

180°

Remember to tighten the

cams down on ALL pieces

once completed!

Caster

Non-locking

Caster x1

Caster Insert x1

Caster Insert

Caster Clip x1

Caster Clip

Place 1st Place 2nd

Place 3rd

VERY IMPORTANT TO PLACE IN THIS ORDER!

This manual suits for next models

Other Arrow Sewing Machine Accessories manuals

Arrow

Arrow OLIVIA 1004 User manual

Popular Sewing Machine Accessories manuals by other brands

Brother

Brother PR-600/600C user guide

Brother

Brother SA179 manual

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SMT-7242 Assembly instruction

Jack

Jack 6040-D operation instruction

JUKI

JUKI IP-410 instruction manual

ZOJE

ZOJE 1900D user manual

ELNA

ELNA 795-816-116 quick start guide

Baby Lock

Baby Lock General Purpose Zig Zag Foot instructions

ELNA

ELNA 202-248-004 quick start guide

Efka

Efka dc 1500 instruction manual

Baby Lock

Baby Lock BLQ2-QGF instructions

Mitsubishi Electric

Mitsubishi Electric MP-G10-AH Technical manual

JUKI

JUKI IP-200 Setup manual

Sullivans

Sullivans Sew & Go instructions

Sailrite

Sailrite ULTRAFEED 120931 Setup guide

Bernina

Bernina Spanish Hemstitch Equipment 47 user manual

Brother

Brother ScanNCut DX Stamp Starter Kit Operation manual

ELNA

ELNA 495-526-20 quick start guide