Armitron ProFit Installation instructions manual
WATCH INSTRUCTIONS &
2 YEAR LIMITED WARRANTY
WHAT’S INCLUDED WITH YOUR ARMITRON PRO-FIT®
•Watch module
•Silicone case with band
•Metal bangle
Please refer to our website armitron.com/ProFit for the most
up to date information on this collection.
WHAT ARMITRON PRO-FIT®TRACKS
•Steps taken
•Calories burned
•Distance traveled
ARMITRON PRO-FIT®Tracking is measured on a daily cycle.
“Activity” is tracked from midnight to midnight.
“Sleep Time” is tracked from noon to noon. We recommend wearing
the ARMITRON PRO-FIT®on your non-dominant arm in order to get a
more accurate step count.
•Charger
•Instruction & Warranty Booklet
•Quick Start Guide
•Active time
•Time slept / deep sleep
CHARGING YOUR ARMITRON PRO-FIT®
Your ARMITRON PRO-FIT®must be charged before you start using it. In
addition, you should charge your ARMITRON PRO-FIT®when a flashing
empty battery symbol appears on the display. This flashing symbol is
to let you know that the battery power is down to a few hours.
To charge your ARMITRON PRO-FIT®, follow the steps below.
1. Remove your watch module from the metal bangle or silicone case.
2. Plug your charging cable into a USB port on your computer.
3. Insert your watch module into the charger as per the instruction
below and attached to the charger.
Groove Green RidgeGroove Green Ridge
1. Align the Green Ridge on module to fit
Groove on charger.
2. Slide module into charger
as pictured and press down.
4. Your watch module will show a battery with lightning sign for a few
seconds. Pressing the buttons on the side of the watch module will
bring back the battery symbol or turn on the display as you need it.
5. Charge until the battery sign is filled up. Recommended charging
time is 3 to 4 hours. Your ARMITRON PRO-FIT®is designed to run up
to 4 days once fully charged.
6. Best time to charge is when watch tracking functions are not in use.
CARE AND WEARING TIPS
The following are tips when caring for your ARMITRON PRO-FIT®:
•Clean and dry the ARMITRON PRO-FIT®regularly, particularly under
the band with a damp cloth.
•Wear your ARMITRON PRO-FIT®band loosely enough to allow air
circulation.
•Use skin care products sparingly on the areas of the wrist covered by
the ARMITRON PRO-FIT®.
HOW TO PUT ON YOUR ARMITRON PRO-FIT®
Remove the protective sticker off of the module.
Your module is shipped in the off position. If charging the module did
not turn on the display, press and hold the button at the 3 o’clock
position for 5 seconds.
The watch module is interchangeable between the silicone case and
the metal bangle. First, align the ridges on 12 and 6 o’clock sides of
the watch module with the
notches on the back side
of the silicone case or
metal case. Then, snap
in the watch module as
per the diagram.
SETTING THE TIME
You do not need to set the time manually. When synchronizing the data
on your watch to the app on your phone, the time of your phone will
be synchronized to the watch.
For changing time zones, re-sync your watch with your phone after your
phone is opened and has acquired the new local carrier time.
Possible slight fast/slow timekeeping of your watch is auto-corrected
when you re-sync it with your phone.
TURNING YOUR ARMITRON PRO-FIT® OFF
Press and hold the button at the 3 o’clock position for 5 seconds.
MODULE BUTTON OPERATION
• Press the button at the 3 o’clock position repeatedly to loop between
the following displays:
“ARMITRON” logo • Time & Date • Calories burned • Steps taken •
Distance traveled • Time sleep / deep sleep
MODULE BUTTON OPERATION (Continued)
• Press the button at the 9 o’clock position to show sleep mode:
If the sleep mode is off (it shows “Z OFF”), press the button at the
3 o’clock position to start sleep monitoring.
If the sleep mode is on (it shows “Z ON”), press the button at the
3 o’clock position to stop sleep monitoring. Then, it will show the
monitoring result of the sleep.
Note: When sleep monitoring is on, all tracking functions are off.
SETTING UP ARMITRON PRO-FIT® ON A MOBILE PHONE
1. Install the ARMITRON PRO-FIT®app. (You can find the ARMITRON
PRO-FIT®app on the iOS App store or Google Play store by
searching for “ARMITRON PRO-FIT®”.) ARMITRON PRO-FIT®runs on
iPhone 4S and up, iPad 3 and up, Android 4.3 and up.
2. Turn on the Bluetooth on your mobile phone and open the
ARMITRON PRO-FIT®app.
3. On the watch module, press the button at the 3 o’clock position
repeatedly until it shows the “ARMITRON” logo.
4. Press and hold the button at the 9 o’clock position for a few
seconds, it will show a 12 digits alpha-numeric validation code.
Write this validation code down.
5. In the app, go to settings page, select the device tab and enter your
validation code into the app. The code is not case sensitive.
6. To save battery power, the display will turn off in 15 seconds. Just
press any button to show the code again.
7. After the code is entered, while it is showing on the display, press
the button at the 3 o’clock position twice to exit.
8. After entering the validation code, tap “Pairing”.
9. Input the personal set-up info in the “Info” tab.
10. Tap “Save” to save it.
11. If you skip set-up, your module will use default values.
12. Then go to “Home” page and tap “Sync” to sync the fitness data
and time.
13. If the message “blue tooth not linked” pops up, tap the antenna
symbol on the upper left corner of the screen to re-link and tap
“Sync” again. You may need to tap this more than once depending
on your Bluetooth connectivity.
OTHER FEATURES OF THE ARMITRON PRO-FIT® APP
• When the daily goal is achieved, there will be a gold star tagged right
at the date so you can see your achievement.
• In the “History” view, the app provides weekly, monthly and yearly
reports. You can review your fitness data history easily.
• The app will follow your phone setting if it is set to Spanish or
Simplified Chinese. The module is always in English.
MEMORY
Your ARMITRON PRO-FIT®module holds the detailed data for the most
recent 7 days. The recorded data consists of steps taken, calories
burned, distance traveled, active time and sleep monitoring. Sync your
ARMITRON PRO-FIT®regularly to have the most detailed data available
to view on your mobile phone. We recommend that you do this daily.
If the battery loses its charge, the current data in the module will be
lost. If you sync the watch to the app daily, your app will be loaded
with the most up to date information. The low battery indicator will
appear on the module when you have about 15% battery life left. You
should sync your watch to the app and recharge as soon as possible.
REGULATORY NOTICE:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the product.
Other manuals for ProFit
1
Table of contents
Other Armitron Watch manuals
Armitron
Armitron MD17421 User manual
Armitron
Armitron T205(5ATM) User manual
Armitron
Armitron Automatic TY2807 User manual
Armitron
Armitron ProFit User manual
Armitron
Armitron IW-YP12585-2 User manual
Armitron
Armitron M1034 User manual
Armitron
Armitron 45/6967PNK User manual
Armitron
Armitron Atara ANALOG User manual
Armitron
Armitron 40/6747BLK User manual
Armitron
Armitron MD07120 User manual
Armitron
Armitron Pro Sport XNAQE01 User manual
Armitron
Armitron PRO SPORT M807 User manual
Armitron
Armitron pro sport MD0346 User manual
Armitron
Armitron IW-YP12585-2 User manual
Armitron
Armitron MD16388 User manual
Armitron
Armitron pro sport AD1144 User manual
Armitron
Armitron prosport M1044 User manual
Armitron
Armitron M833 User manual
Armitron
Armitron YP13614 User manual
Armitron
Armitron M799 User manual
