Armacost Lighting 713420 User manual

Proline RGB Color LED Controller

With RF Remote Control

Model # 713420

Introduction

This LED controller is designed to drive constant voltage

RGB LED products such as LED tape light or LED

ﬁxtures in a voltage range of 5–24 volts DC. The receiver

works with the RF wireless remote control, which allows

the user to choose between multiple colors, adjust

the LED brightness, and select dynamic effects.

Receiver & wiring

24mm

72mm

87mm

123

1. Input – from power supply

The controller input and output voltage range is

5–24 volts DC. Make sure the LED lighting voltage is

within this range and below the rated wattage of the

power supply. Connect input wires from the power

supply to the controller as indicated by the polarity

markings on the controller (+ to + and – to –).

2. Output – to LED lighting

Observe polarity indicated on the controller

when connecting to LED lighting (+ to +,

G to G, R to R, and B to B).

Make sure the voltage of the LED lighting is the

same as the power supply and the maximum

load doesn’t exceed that of the controller.

CAUTION: Shorting of output cables could cause

permanent damage to controller. Make sure

cables are well insulated from each other.

3. Controller status indicator

This light shows the controller status as follows:

Steady green: Normal working mode

Single green blink: Command received

Long single green blink: Mode or color cycle limit reached

Long single yellow blink: Brightness or speed limit reached

Red ﬂash: Overload protection

Yellow ﬂash: Overheat protection

Green ﬂash 3 times: New remote control paired

4. Wiring diagram

Connect the power supply to the controller input

and the controller output to the LED lighting.

The output voltage of the power supply must

be the same as the voltage of the LED lighting.

Make sure all power cables are conected

securely and insulated before powering on.

LED

Controller

5–24V DC

Output

Power Supply

5–24V DC 5–24V DC

100/230V

AC Power

LED

Lighting

Remote Control

5. On / Off

Press the “|” key to turn on controller or the “0”

key to turn off. The controller will remember

the controller state when powered off, and will

return to that state when powered back on.

6. RGB color setting

Press the “COLOR+” and “COLOR–” keys to

scroll through all the color options. The colored

keys are shortcuts for preset colors. Press the

and the keys to adjust color brightness.

2 3

Compact

Size

Wide Voltage

Range

High

Power

Full Safety

Protection

Wireless

Remote

7. Dynamic effects

Press “MODE+” and “MODE–” to select the

dynamic effect mode and “SPEED+” and

“SPEED–” to adjust the effect speed.

Press the “DEMO” key to play the dynamic effects.

8. Remote indicator

When pressing keys, the indicator blinks if the remote

is working properly. If the indicator ﬂashes slowly

when pressing keys, battery power is low and it needs

to be replaced. Replace with a CR2032 battery.

Remote control operation

9. Using the remote control

Pull out plastic battery insulation tab before use.

The RF wireless remote will work through walls

and doors. Do not install in a metal enclosure.

10. Pairing with a new remote control

The remote control and receiver are already paired,

but up to 5 remotes can be paired to one receiver.

To pair a new remote:

1. Disconnect power to receiver

and wait ﬁve seconds.

2. Reconnect power and wait ten seconds.

3. Press the “SPEED–” and “SPEED+” keys

simultaneously for about three seconds

until the remote indicator ﬂashes quickly.

11. De-pairing remotes

To de-pair a remote control, pair the remote you

wish to continue using with the controller and

any other paired remotes will be de-paired.

Safety Protection

The controller has a function to prevent it from

being damaged by mis-wiring, output short circuit,

overloading, or overheating. It will automatically

shut down under these extreme conditions until

safe operating conditions are restored. To avoid

shutdowns, make sure the installed LED lighting is

compatible with constant voltage driving, is in the

rated range of the controller, and the cables are well

connected and insulated. Also, install the controller

with proper ventilation and heat dissipation in mind.

Customer support

Email: [email protected]

Phone: 410-354-6000

Monday–Friday, 9 a.m.–5 p.m., ET

Warranty

Limited 1-year warranty. This product is for dry

location use only. Improper installation, improper

powering, abuse, or failure to use this device for

its intended purpose will void warranty. Proof of

purchase is required for all returns. Questions?

Email [email protected].

Speciﬁcations

Output mode..........................PWM constant voltage

Working voltage .......................................5–24V DC

Rated output current.......................3x4A (12A max)

Brightness levels ................................................. 5

Static colors...................................................... 30

Dynamic effects................................................. 34

Dynamic speed levels......................................... 10

Color preset keys ................................................. 7

PWM physical grade............................... 4000 steps

Overload protection............................................Yes

Overheat protection............................................Yes

Remote frequency.................................433.92MHz

Remote control range ....... >49 ft./15m in open areas

Controller dimensions .......... 3.43 X 0.95 X 0.59 in./

................................................... 87 X 24 X 15mm

Remote dimensions ........... 3.41 X 1.42 X 0.329 in./

............................................... 86.5 X 36 X 7.5mm

4 5

armacostlighting.com

Other Armacost Lighting Lighting Equipment manuals

Armacost Lighting

Armacost Lighting RibbonFlex Pro User manual

Armacost Lighting

Armacost Lighting RibbonFIex Pro User manual

Armacost Lighting

Armacost Lighting RibbonFlex Home 421501 User manual

Armacost Lighting

Armacost Lighting RibbonFlex home 624340 User manual

Armacost Lighting

Armacost Lighting RibbonFlex PRO User manual

Armacost Lighting

Armacost Lighting RibbonFlex PRO User manual

Armacost Lighting

Armacost Lighting RibbonFlex home User manual

Armacost Lighting

Armacost Lighting ProLine 714421 User manual

Armacost Lighting

Armacost Lighting RibbonFlex home 421504 User manual

Armacost Lighting

Armacost Lighting RibbonFlex Home 421502 User manual

Armacost Lighting

Armacost Lighting RibbonFlex PRO 451200 User manual

Armacost Lighting

Armacost Lighting RibbonFlex home 421340 User manual

Armacost Lighting

Armacost Lighting ProLine 513115 User manual

Armacost Lighting

Armacost Lighting ProLine 714421 User manual

Armacost Lighting

Armacost Lighting 513115 User manual

Armacost Lighting

Armacost Lighting GroFlex GFS2835060 User manual

Armacost Lighting

Armacost Lighting RibbonFlex Pro User manual

Armacost Lighting

Armacost Lighting 513119 User manual

Armacost Lighting

Armacost Lighting RibbonFlex home 421500 User manual

Armacost Lighting

Armacost Lighting RibbonFlex Home User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions