Arkon CLAMPRCB User manual

Telescoping pole extends

upward from 17 inches to

29 inches.

Compatibility:

Fits smartphones with

cases weighing up to 2

pounds and measuring

up to 4” wide.

IMPORTANT:

Do not overtighten ring.

Overtightening may

damage threads on

holder and also make it

difﬁcult to adjust phone

and tablet holders.

3 4

Attach mount to surface by tightening

C-clamp knob. Slide optional rubber clamp

boot onto the top of the mount’s clamp to

prevent scratching clamp surface if desired.

Attach overhead arm assembly to clamp

pedestal by unscrewing the collar at the top

of the pole until the metal ball side of the

overhead arm assembly ﬁts into the collar.

Tighten collar clockwise to secure.

Your Remarkable Creators Bundle will arrive in seven pieces:

HD011-B

Clamp Pedestal

with Telescoping

Pole

SP25MMCAM

25mm to 1/4”-20

Camera Bolt Adapter

(optional)

2

RV001WR-B

For thicker tables or desks, adjust the clamp

bracket by using a Phillips screwdriver to

remove the screws from the top position and

move them to the bottom position.

Unscrew tightening ring from holder.

Place ring over the 17mm end of mount

then snap the holder onto the ball. Set to

desired position, then tighten ring.

Using two hands, insert phone into the

holder by pushing the device into one of the

spring-loaded support arms. Expand the other

support arm and fully insert device until it lays

ﬂat against the blue rubber pad.

Assembled Mount

SP3RMPR0PL

Tightening Ring

Tightening

Knob

Collar

Metal

Ball side

Continued on page 2

CLAMPRCB | Remarkable Creators Video Phone and Tablet Clamp with Ring Light rev.092418

HD011-B

RV001WR-B

Phone Holder

SPLEDRING

LED Ring Light

SP3RMPROPL

Overhead Arm

Assembly

GN031-SBH-B

Clamp Post Mount

TAB001

GN031-SBH-B

5Shafts can be adjusted by unscrewing

the shafts’ knobs to loosen. Tighten

knobs to set.

TAB001

Tablet Holder

Clamp Bracket

C-Clamp Knob

C-Clamp

Screws

Screws

1a1b

7

9

10

6

8

To attach optional camera/pico projector adapter, unscrew shaft knob and

remove phone holder, ring, and ball adapter. Attach the 25mm ball end of the

camera adapter to the shaft and tighten clockwise to secure.

Unscrew mount’s knob to loosen grip. Place mount around pole and

tighten knob to secure. Attach short, medium or long support legs to the tablet holder based

on the size of your device.

Push down on lower legs of spring-loaded holder to insert tablet.

For instructions on how to assemble tablet holder, refer to included

TAB001 manual. Attach tablet holder by inserting the mount’s Dual

T-Tabs into the holder’s Dual T-Slots.

Adjust the height of the pole by loosening the adjustment collar

counterclockwise. Tighten clockwise to set height.

Consumer Hotline:

USA (800) 841-0884

INT’L (626) 254-9005

Monday - Friday 9 am -5pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in Taiwan and USA

© Copyright 2018 Arkon Resources, Inc.

!

page 2

Tightening

Knob

OPTIONAL

rev.092418

CLAMPRCB | Remarkable Creators Video Phone and Tablet Clamp with Ring Light

Safety Precautions

Arkon Resources, Inc. is not responsible for any damages caused to your

device or yourself due to the installation or use of this mount.

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

Vivo

Vivo MOUNT-HP23XW instruction manual