Arista DCA-NDR-S1 User manual

Quick Start Guide

Awake Security Appliance

DCA-NDR-S1

DCA-NDR-S5

DCA-NDR-NB10

DCA-NDR-A5

Arista Networks

www.arista.com

DOC-05228-01

and the Arista logo are trademarks of Arista Networks, Inc in the United States and other countries. Other product or service

names may be trademarks or service marks of others.

Headquarters

5453 Great America Parkway

Santa Clara, CA 95054

USA

+1 408 547-5500

www.arista.com

Support

+1 408 547-5502

+1 866 476-0000

[email protected]

Sales

+1 408 547-5501

+1 866 497-0000

[email protected]

Contents

Chapter 1: Overview................................................................................1

1.1 Scope......................................................................................................................................1

1.2 Receiving and Inspecting the Equipment...............................................................................1

1.3 Installation Process.................................................................................................................1

1.4 Safety Information...................................................................................................................2

1.5 Obtaining Technical Assistance............................................................................................. 2

1.6 Specifications..........................................................................................................................3

Chapter 2: Preparation............................................................................5

2.1 Site Selection..........................................................................................................................5

2.2 Tools and Parts Required for Installation...............................................................................5

2.3 Electrostatic Discharge (ESD) Precautions............................................................................6

Chapter 3: Rack Mounting an Awake Security Appliance...................7

3.1 Installing 1RU Awake Security appliances.............................................................................7

3.2 Installing 2RU Awake Security appliances.............................................................................9

Chapter 4: Cabling the Appliance....................................................... 13

Chapter 5: Configuring the Awake Security Platform....................... 15

5.1 Connecting to the Admin CLI...............................................................................................15

5.2 Configuring the Appliance.................................................................................................... 15

5.2.1 Configuring the Management Interface.................................................................. 15

5.2.2 Configuring DNS.....................................................................................................16

5.2.3 Configuring NTP..................................................................................................... 16

5.2.4 Configuring Proxy................................................................................................... 16

5.2.5 Configuring IPMI / DRAC Interface.........................................................................16

5.3 Verifying the Configuration...................................................................................................17

Appendix A: Status Indicators.............................................................19

A.1 Control Panel Indicators.......................................................................................................19

A.2 Front Panel Status Indicators.............................................................................................. 20

A.3 Rear Panel Status Indicators...............................................................................................20

Appendix B: Parts List..........................................................................23

B.1 Cables...................................................................................................................................23

Appendix C: Front Panel...................................................................... 25

Appendix D: Rear Panel....................................................................... 27

iii

Appendix E: Regulatory Model Numbers........................................... 29

Chapter 1

Overview

This guide is focused on the installation and basic configuration for the Awake Network Detection and

Response (NDR) products. Arista offers the Awake Network Security Platform through its subsidiary,

Awake Security. The AI based software platform operates on a physical appliance or a set of physical

and/or virtual appliances. The hardware can be purchased with a Stock Keeping Unit (SKU) having

the Data Center Automation (DCA) prefix in the format of DCA-NDR-XY, where X is A (All-in-One), NB

(Nucleus), or S (Sensor); and Y is a number indicating a maximum Gb/s rate (currently 1, 5, or 10).

Each of the appliance types have unique characteristics, so be sure to identify the correct appliance

(All-in-one, Nucleus, or Sensor) for the function before beginning the installation tasks.

1.1 Scope

This guide is intended for properly trained service personnel and technicians who need to install and

configure the Awake Security appliances with the following SKU format:

• DCA-NDR-S1, 1RU Sensor Appliance

• DCA-NDR-S5, 2RU Sensor Appliance

• DCA-NDR-NB10, 2RU Nucleus Appliance

• DCA-NDR-A5, 2RU All-in-One Appliance

Note: Only qualified personnel should install, service, or replace this equipment.

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

1.2 Receiving and Inspecting the Equipment

Upon receiving the Awake Security appliance(s), inspect the shipping boxes and record any external

damage. Retain packing materials if you suspect that part of the shipment is damaged; the carrier may

need to inspect them.

If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any

accessories that may be packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with

your purchase order. Appendix B provides a list of components included with the Awake Security

appliance.

1.3 Installation Process

The following tasks are required to install and use the Awake Security appliance:

1. Select and prepare the installation site (Section 2.1).

2. Assemble the installation tools (Section 2.2).

3. Attach the mounting brackets and install the Awake Security appliance in an equipment rack

(Chapter 3).

4. Connect the Awake Security appliance to the power source and network devices (Chapter 4).

5. Configure the Awake Security appliance (Chapter 5).

Note:

Class 1 Laser Product: This product has provisions to install Class 1 laser transceivers

which provide optical coupling to the communication network. Once a Class 1 laser product

is installed, the equipment is a Class 1 Laser Product (Appareil à Laser de Classe 1). The

customer is responsible for selecting and installing the Class 1 laser transceiver and for

insuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 60825, CSA E60825-1,

and Code of Federal Regulations 21 CFR 1040 is not exceeded after the laser transceiver

have been installed. Do not install laser products whose class rating is greater than 1. Refer

to all safety instructions that accompanied the transceiver prior to installation. Only Class 1

laser devices, certified for use in the country of installation by the cognizant agency are to be

utilized in this product.

Produit Laser de classe 1: Ce produit a des dispositions pour installer des émetteurs-

récepteurs de laser de classe 1 qui offre de couplage au réseau de communication

optique.Une fois un produit laser de classe 1 est installé, l'équipement est un produit Laser

de classe 1 (Appareil à Laser de Classe 1).Le client est responsable pour sélectionner et

installer l'émetteur/récepteur de laser de classe 1 et pour assurer que la classe 1 AEL (limite

d'émission admissible) par EN/IEC 6-825, CSA E60825-1, et Code des règlements fédéraux

21 CFR 1040 ne soit pas dépassée après avoir installé l'émetteur/récepteur de laser. Ne

pas installer des appareils à laser dont la cote de classe est supérieure à 1.Voir toutes

les consignes de sécurité qui ont accompagné l'émetteur-récepteur avant l'installation.

Seuls appareils laser de classe 1 certifiés pour une utilisation dans le pays d’installation

par l’organisme compétent doivent être utilisées dans ce produit.Ultimate disposal of this

product should be in accordance with all applicable laws and regulations.

Note:

Ultimate disposal of this product should be handled in accordance with all national laws and

regulations.

Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien

qualifié.

1.4 Safety Information

Refer to the Arista Networks Compliance and Safety Guides document, translated into a number of

languages and available at the bottom of the page in the Hardware tab at:

https://www.arista.com/en/support/product-documentation

1.5 Obtaining Technical Assistance

Any customer, partner, reseller or distributor holding a valid Arista Service Contract can obtain

technical support in any of the following ways:

•Email: mailto:[email protected]. This is the easiest way to create a new service request. Include

a detailed description of the problem.

•Web: https://www.arista.com/en/support

A support case may be created through the support portal on our website. You may also download

the most current software and documentation, as well as view FAQs, Knowledge Base articles,

Security Advisories, and Field Notices.

•Phone: +1 866-476-0000 or +1 408-547-5502.

Overview

Note: No user serviceable parts inside. Refer all servicing to qualified service personnel.

Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien

qualifié.

1.6 Specifications

Table 1: Awake Security appliance Specifications (RUs, Dimensions, and Weight)

Awake Security

appliance SKU Rack Units

(RUs) Dimensions (W x H x D) Weight

DCA-NDR-S1 1 43.7 x 4.3 x 65.0 cm (17.2 x 1.7 x 25.6

in) 20.87 kg (46 lbs.)

DCA-NDR-S5 2 43.7 x 89.0 x 72.3 cm (17.2 x 3.5 x 28.5

in) 32.7 kg (72.0

lbs.)

DCA-NDR-NB10 2 43.7 x 89.0 x 72.3 cm (17.2 x 3.5 x 28.5

in) 32.7 kg (72.0

lbs.)

DCA-NDR-A5 2 43.7 x 89.0 x 72.3 cm (17.2 x 3.5 x 28.5

in) 32.7 kg (72.0

lbs.)

Chapter 2

Preparation

2.1 Site Selection

The following criteria should be considered when selecting a site to install the Awake Security

appliance(s):

•Temperature and Ventilation: For proper ventilation, install the Awake Security appliance

where there is ample airflow to the front and back of the Awake Security appliance. The ambient

temperature should not go below 0° or exceed 40°C.

Note:

To prevent the Awake Security appliance from overheating, do not operate it in an area

where the ambient temperature exceeds 40°C (104°F).

Pour éviter que l'appliance Awake Security ne surchauffe, ne l'utilisez pas dans une zone où

la température ambiante est supérieure à 40 °C (104 °F).

•Rack Space: Install the Awake Security appliance in a 19" rack or cabinet. The accessory kit

provides mounting brackets for a four-post rack.

When mounting the Awake Security appliance in a partially filled rack, load the rack from bottom to

top, with the heaviest equipment at the bottom. Load the Awake Security appliance at the bottom if

it is the only item in the rack.

•Other Requirements: Select a site where liquids or objects cannot fall onto the equipment and

foreign objects are not drawn into the ventilation holes. Verify these guidelines are met:

• Clearance areas should be maintained in the front and rear panels allow for unrestricted cabling

and access to the switches and controls..

• All front and rear panel indicators can be easily seen and read.

Note: The Status indicators and control functions are shown in Appendix A.

• Power cords can reach from the power outlet to the connector on the rear panel.

Note: All power connections must be removed to fully de-energize the unit after it is

powered off using the power switch.

Toutes les connexions électriques doivent être retirées pour mettre complètement l'unité

hors tension après sa mise hors tension à l'aide de l'interrupteur d'alimentation.

2.2 Tools and Parts Required for Installation

Each Awake Security appliance provides an accessory kit that contains parts that are required to install

it. In addition to the accessory kit, the following tools and equipment are required to install the Awake

Security appliance:

• Screws or rack mounting nuts and bolts

• Screwdriver

• Four post rails

Note: No additional equipment is required for installation into tool-less four post racks.

Accessory kit does not include screws for attaching the Awake Security appliance to the equipment

rack. When installing the appliance into an equipment rack with unthreaded post holes, nuts are also

required to secure the device to the rack posts.

2.3 Electrostatic Discharge (ESD) Precautions

Observe these guidelines to avoid ESD damage when installing or servicing Awake Security

appliances:

• Assemble or disassemble equipment only in a static-free work area.

• Use a conductive work surface (such as an anti-static mat) to dissipate any static charge

accumulation.

• Wear a conductive wrist strap to dissipate any static charge accumulation.

• Minimize handling of assemblies and components.

• Keep replacement parts in their original static-free packaging until they can be handled with anti-

static precautions.

• Remove all plastic, foam, vinyl, paper, and other static-generating materials from the work area.

• Use tools that do not generate ESD.

This manual suits for next models

Table of contents

Other Arista Firewall manuals

Arista

Arista CCA-ETM-Q4 User manual

Popular Firewall manuals by other brands

Cisco

Cisco S190 quick start guide

Fortinet

Fortinet FortiGate Voice Series install guide

ADTRAN

ADTRAN NetVanta 2300 Specifications

SecureLogix

SecureLogix ETM System installation guide

NETGEAR

NETGEAR ProSafe FVX538 Reference manual

Lanner

Lanner FW-8877 user manual

Huawei

Huawei USG6000 Series Upgrade guide

H3C

H3C SecPath F5000-AI-15 installation guide

Nexcom

Nexcom DNA 1150 user manual

Fortinet

Fortinet FortiGate-60 series install guide

Cisco

Cisco 3110 Hardware installation guide

Draytek

Draytek Vigor2860 Series user guide

Lanner electronics

Lanner electronics FW-7650 Series user manual

Swisscom

Swisscom Internet Backup manual

SonicWALL

SonicWALL NSa 5700 quick start guide

DPtech

DPtech FW1000 SERIES Maintenance manual

FEITIAN

FEITIAN MultiPass FIDO product manual

EBLOCKER

EBLOCKER PRO user manual