Ariens Path-Pro Manual

EN - 1

Path-Pro

Setup Instructions

IDENTIFICATION

1. Handlebar

2. Auger Control Bar

3. Auger Control Cable Assembly

4. Remote Discharge Chute Handle Assembly

(Model 938033)

5. Recoil Starter Handle

6. Discharge Chute Handle

(Models 938030, 031, 032, 034)

7. Discharge Chute Deflector Handle

8. Discharge Chute

9. Wing Knob

10. Auger Paddle

11. Oil Fill (Models 938030, 034)

12. Oil Fill (Models 938031, 032, 033)

13. Oil Drain Plug

14. Fuel Cap & Tank

15. Fuel & Oil Door

16. Pivot Bolt

17. Knob

18. Water Guard Ring

19. 1/4 x 1 1/4" Plastic Tapping Screw (3)

20. 16 oz 5W-30 Oil

Tools Required:

• 7/16" wrench or socket

• 3/8" wrench or socket

EN - 2

ASSEMBLY

Open box and remove all parts. Verify there is no

damage or missing parts.

Assemble handlebar.

a. Loosen knobs (# 17) on each side of handlebar

and rotate handlebar to operating position.

b. Insert lower end of pivot bolt (# 16) into

handlebar holes.

c. Ensure auger control cable is not pinched and

tighten knobs. Do not overtighen.

Attach remote discharge chute handle. (Model 938033)

a. Remove flange nuts and bracket from remote

chute handle assembly (# 4).

b. Position remote chute handle assembly on

handlebar.

c. Place bracket on handlebar and secure with

flange nuts. Do not overtighten.

d. Move remote chute handle completely forward

and rearward to ensure proper operation.

e. Place remote chute handle halfway between full

forward and full rearward.

Attach discharge chute.

a. Place water guard ring (# 18) on discharge

chute.

b. Position discharge chute (# 8) onto ring.

c. Position chute handle (# 6) on top of discharge

chute. (Models 938030, 031, 032, 034)

d. Ensure holes in all pieces align and secure with

three screws (# 19). Do not overtighten.

e. Move remote chute handle (model 938033) or

chute handle (models 938030, 031, 032, 034) to

ensure proper operation of discharge chute.

WARNING: AVOID INJURY. Read and

understand the entire Safety section in the

Owner’s Manual before proceeding.

DO NOT start engine until all assembly steps

have been completed.

Bracket

Flange Nuts

Auger Control Bar

Remote

Chute

Handle

EN - 3

Engage auger control bar (# 2) to ensure proper

operation. There should be no excessive tension on

cable. When auger control bar is disengaged, there

should be slight slack in cable and no tension.

See Owner’s Manual if adjustment is necessary.

Add oil. (Models 938031, 032, 033)

a. Open fuel and oil door (# 15) to access oil fill

(# 12).

b. Remove cap and add 16 oz. 5W-30 oil (# 20).

Check oil level on dipstick to ensure proper

operating level. See Owner’s Manual for

instructions.

c. Replace cap and close door.

Add oil. (Models 938030, 034)

a. Remove cap from oil fill (# 11) and add 16 oz.

5W-30 oil (# 20). Check oil level on dipstick to

ensure proper operating level. See Owner’s

Manual for instructions.

b. Replace cap.

Models 938030, 031, 032, 034

WARNING: AVOID INJURY. DO NOT

proceed until operation and safety rules

are fully understood.

Read and understand entire Owner’s

Manual before proceeding.

Other Ariens Snow Blower manuals

Ariens

Ariens 924 SNO-THRO 924108 Owner's manual

Ariens

Ariens Professional Sno-Thro Series User manual

Ariens

Ariens 924000 User manual

Ariens

Ariens Sno-Thro 939003-ST520E Owner's manual

Ariens

Ariens SNO-THRO 938015 - 322 User manual

Ariens

Ariens Sno-Thro Deluxe 24 User manual

Ariens

Ariens Sno-Thro 924550 Owner's manual

Ariens

Ariens 924000 User manual

Ariens

Ariens 932308 User manual

Ariens

Ariens 926057 Owner's manual

Ariens

Ariens Compact 24 LE User manual

Ariens

Ariens Professional 21 938024-SSR User manual

Ariens

Ariens Sno-Thro 920001 Owner's manual

Ariens

Ariens Sno-Thro Pro 28 926038 Owner's manual

Ariens

Ariens Hydro Pro 28 Owner's manual

Ariens

Ariens 920014 Owner's manual

Ariens

Ariens 932105 8526 932506 8526 Owner's manual

Ariens

Ariens 924027 User manual

Ariens

Ariens 921045 User manual

Ariens

Ariens 10995 Use and care manual

Ariens

Ariens SNO-THRO 924318-ST824 Owner's manual

Ariens

Ariens SNO-THRO 932 User manual

Ariens

Ariens Sno-Thro 938017 Owner's manual

Ariens

Ariens Sno-Thro 910006-000001 User manual

Popular Snow Blower manuals by other brands

Murray

Murray 624504X4A Instruction book

Blizzard

Blizzard POWER PLOW 8100PP owner's manual

Craftsman

Craftsman 486.24837 Operator's manual

Yard-Man

Yard-Man E2B5 Operator's manual

ST ST 526 A Operator's manual

MTD

MTD 3AA Operator's manual

Toro

Toro Power TRX 1428 OHXE Operator's manual

Ryobi

Ryobi RYAC800 Operator's manual

Poulan Pro

Poulan Pro 416829 owner's manual

Poulan Pro

Poulan Pro 437986 owner's manual

MTD

MTD 319-180-00 owner's guide

Brute

Brute 1695565 Operator's manual

Egholm

Egholm City Ranger 2250 Operator's manual

Poulan Pro

Poulan Pro 420915 owner's manual

GreenWorks

GreenWorks SNF402 Operator's manual

LOFTNESS

LOFTNESS 601D1 Operator's manual

LOFTNESS

LOFTNESS 1082I Operator's manual

LOFTNESS

LOFTNESS 481EL Operator's manual