Argus DC1540 User manual
0
Table of Contents
I. Welcome------------------------------------------------------------------------------2.
II. Getting Started---------------------------------------------------------------------- 3.
Contents of package ------------------------------------------------------------------- 3.
System Requirements ------------------------------------------------------------------3.
DC1540 Features------- -----------------------------------------------------------------3.
LCD Screen Features------- ----------------------------------------------------------- 4.
III. Powering Up--------------------------------------------------------------------------7.
Battery Installation
Turning camera ON/OFF
Sleep Mode
IV. Taking Pictures-----------------------------------------------------------------------8.
V. Install Arcsoft Programs and Camera Drivers--------------------------------9.
Install Camera Drivers
Install Arcsoft PhotoImpression 4.0--------------------------------------------------10.
Install Arcsoft VideoImpressio 1.6----------------------------------------------------11.
Install Arcsoft PhotoBase 3.0--------------------------------------------------------- 12.
VI. Uninstall Arcsoft Programs-------------------------------------------------------12.
VII. Downloading Photos Using PhotoImpression 4.0--------------------------13.
VIII. Video Playback Using VideoImpression 1.6---------------------------------14.
IX. Photo and Sharing Management Using PhotoBase 3.0------------------15.
X. Specifications------------------------------------------------------------------------16.
1
I. Welcome
Thank you for choosing Argus Camera to pursue your digital adventures. Whether you
are creating memories of your friends and family or exploring the great outdoors,
since 1936 Argus Camera has been there, sharpening your images with leading edge
technology. To get the utmost satisfaction from your DC1540 digital camera, please
take a moment to read through this manual. Its contents will send you on an
educational journey into your camera’s multiple capabilities.
Thank you again for choosing Argus!
This camera is not resistant to water and should not be used outdoors in snow or
rain. If accidentally dropped in water, please quickly pour out the water. Dry it
with sunlight or an air-blower.
Protect it from excessive humidity. It will wet the lens and the pictures taken will
be blurred.
Do not attempt to disassemble the camera yourself. Always take it to an
authorized service facility for repair.
To store the camera, wrap it in a piece of clean, soft cloth and place it in a cool,
dry, dust-free place.
2
II. Getting Started
DC1540 Package Contents:
.DC1540 digital camera
.Installation CD (including camera drivers, Arcsoft software and User’s Manual)
.QOG- Quick Operation Guide
.USB cable
.2-AAA Batteries
System Requirements
.Personal computer, laptop, desktop, or IBM compatible with Pentium 166 MHz
minimum, and with an active USB (universal serial bus) port.
.Windows 98SE/ME/2000/XP, CD ROM drive, color monitor, mouse and keyboard.
NOTE
For transferring still images or for video conference, your computer must have a
modem and communication software for Internet connection.
DC1540 Features
3
LCD Screen Mode Features
The DC1540 has eight modes that appear in the following sequence:
4
Self-Timer Mode:
1. Press the mode button to Self-Timer Mode.
2. Press the shutter button. The camera will take a picture automatically after
10 seconds.
Continuous Mode:
1. Press the mode button to Continuous Mode
2. Then press the shutter button to confirm the setting.
3. Press the shutter button. The camera will take approximately 10 pictures per
second in a continuous sequence.
Image resolution Mode:
1. Press the mode button to Low Image Resolution Mode.
2. Press the shutter button to take pictures. The camera is set to take and
store 200 pictures in this mode.
NOTE : If “Low” Mode does not appear on the LCD screen, the camera will take
and store 50 High-Resolution pictures.
Battery Indicator:
This symbol indicates the level of battery power. When this indicator
flashes, change the batteries immediately.
AVI Mode:
1. Press the mode button to AVI Mode
2. Then press the shutter button to confirm the setting.
3. Press shutter button to record video clips. The video clips are stored in the
camera’s memory.
Delete Single Picture Mode:
1. Press the mode button to Delete Single Picture Mode
2. Then press the shutter button to confirm the setting
3. Press the shutter button 1 time to erase the last picture stored
in the camera memory.
5
Delete All Picture Mode:
1. Press the mode button to Delete All Picture Mode
2. Then press the shutter button to confirm this setting. The number of
pictures to be deleted will flash.
3. Press the shutter button for 2~3 seconds to erase all pictures stored in the
camera memory.
. AC Frequency Mode:
1. Press the mode button to AC Frequency Mode.
2. Choose the appropriate frequency of power. Recommended frequency is
60Hz .
Picture Counter:
Number of picture taken is indicated on the LCD screen.
6
III. Powering Up
Battery Installation
i. Open the battery chamber cover.
ii. Insert batteries in correct polarity (+ and -) as shown on the inside of the battery
chamber.
iii. Close the battery chamber cover.
iv. Power turns ON automatically after the batteries are installed.
v. The camera is now ready to take pictures.
Battery warning:
Do not mix old and new batteries
Do not mix alkaline, standard(carbon-zinc),or rechargeable(nickel-cadmium)
Batteries.
Turning the Power ON/OFF
1.Power turns ON automatically when the batteries are installed.
2.To turn camera OFF press and hold the MODE button until the camera beeps and
the LCD screen is blank.
NOTE: All pictures will be erased if the batteries are removed or discharged.
3.To turn camera ON from the OFF mode, press and hold the MODE button until a
beep is heard and the LCD screen turns on.
Sleep Mode
●When the camera is ON while not being used for 30 seconds, it will automatically
perform sleep mode to save battery power.
●To identify this mode, the dark power ON lamp will illuminate and the LCD screen
will be blank.
●To re-activate the camera from sleep mode:
1.Press the MODE button once.
2.The camera is ready to take the next picture.
7
IV. Taking Pictures
Taking a Snapshot
1.Aim the camera and compose your image by looking through the viewfinder.
2.Press the shutter button down. A buzz sound will be heard indicating that a
picture has been taken.
3.The LCD screen will show the number of pictures remaining.
NOTE:
●The camera stores all pictures in the built-in memory.
●The camera will not take pictures in very low light conditions, a low tone
buzz sound will alert when a picture cannot be taken.
8
V. Install Arcsoft Programs and Camera Drivers
Install Camera Driver
1. Insert CD-Disc and Select the Camera Driver.
2. Click “ Next ”.
3. Select a setup type and Click “ Next ”.
4. Click “ Install “.
5. Driver Installing.
6. Click “ Finish ”.
7. Re-starting your computer is recommended.
9
Table of contents
Other Argus Digital Camera manuals
Argus
Argus Argus DC-5195 User manual
Argus
Argus DC3550 User manual
Argus
Argus DC1512 User manual
Argus
Argus SHOWMASTER 822 User manual
Argus
Argus DC-2185 User manual
Argus
Argus DC-3195 User manual
Argus
Argus DC3650 User manual
Argus
Argus A2F Parts list manual
Argus
Argus Bean3 User manual
Argus
Argus DC2250 User manual
Argus
Argus DC-3190 User manual
Argus
Argus Argus DC-5195 User manual
Argus
Argus Mi-TIC Series User manual
Argus
Argus QuickClix 1730 User manual
Argus
Argus DCM-098 User manual
Argus
Argus DC1620 User manual
Argus
Argus DC3200 User manual
Argus
Argus Mi-TIC Series User manual
Argus
Argus Bean5 User manual
Argus
Argus DC1500 User manual
