Argus Argus DC-5195 User manual
DC-5195
User Manual
Package Contents:
Argus DC - 5195 Digital Camera
User’s Manual
Installation CD
USB cable
2
Safety And General Information ................2
Getting To Know Your Camera .................5
Operating The Camera .............................7
Camera Menu ...........................................8
Video Menu ...............................................9
Playback Menu .........................................9
Settings ...................................................10
Audio Recorder and Playback .................11
Miscellaneous Infornation .......................12
Installing the Software .............................13
Frequently Asked Questions ...................14
Requirement and Specification ...............15
Safety and General Information
Thank you for purchasing the Argus DC -
1595 digital camera. We hope that you
enjoy this camera for years of trouble-free
operation. Please read this manual before
using the camera and follow the instruc-
tions to avoid any damage that could be
caused by improper operation.
Caution
The software CD-ROM packaged with the
camera is designed to be used with a
personal computer only. Do not attempt to
play this CD-ROM on a stereo or CD player
as this may cause damage to both the disc
and the CD player.
Table of Contents
3
Copyright information
Unless agreed by the rightful owner,
pictures taken with this digital camera
cannot be used in violation of copyright law.
Moreover, when there is a “No Photogra-
phy” restriction in place, you cannot record
any performance, improvisation, or exhibit
even for personal use. Any transfer of
pictures or memory cards with data must be
conducted under the constraints of copy-
right law.
Caution when using the camera
This product consists of intricate electrical
parts. To ensure the camera photographs
normally, do not drop or hit the camera
when taking pictures. Avoid using or
placing the camera in the following
locations:
1. Damp and dusty places.
2. Sealed vehicles or other places exposed
to direct sunlight or subject to extreme
temperatures.
3. Turbulent environments.
Do not open the battery cover when the
power is on as this may cause a loss of
images.
4
If the camera has gotten wet, immediately
turn the power OFF and remove the
batteries. This camera is a precision
electronic device. Do not attempt to
service this camera yourself. Opening or
removing the cover may expose you to
dangerous voltages or other risks. Further,
avoid exposing this camera to direct
sunlight as doing so could cause a fire. Do
not attempt to dry it with an external heat
source.
How to maintain your camera
1. If the lens, LCD display, or viewfinder is
dirty, please use a cleaning cloth to wipe
the surface clean. Avoid touching these
areas with your fingers.
2. When not in use, keep the camera in a
carrying case, otherwise you risk scratching
the lens, LCD display or viewfinder.
3. Do not use soap, detergent or other
solution to clean the camera. Use a clean,
soft cloth only.
5
Getting To Know Your Camera
1. Lens 10. RIGHT/DISP
2. Flash light 11. UP
3. MACRO button 12. DOWN
4. USB jack 13. MODE button
5. Battery cover 14. BUSY Light
6. SD card slot 15. MACRO light
7. Tripod socket 16. Shutter / OK button
8. LEFT / Flash 17. POWER button
9. MENU button 18. TFT monitor screen
6
Monitor Screen Display
Main Menu Description
7
Operating The Camera
Open the battery cover and place the batteries
according to the polarity on the battery door.
Optional: Insert the SD memory card. You may
have to reformat the memory card.
Note: Do not change the battery until after you
connect the camera to a computer. Otherwise
the previously taken photographs will be lost.
Taking Photos
Press the POWER button to turn the camera
ON. Compose the image on the digital display
screen so that the main subject is within the
focus frame. Adjust the magnification ratio by
pressing the / buttons. Press the shutter
button to take picture.
Viewing Images
On the camera - Press MENU and select
and press OK to confirm. Press the shutter
button to view the images in thumbnail format.
Press to browse through the pictures and
OK to confirm. To zoom in on the individual
images, press , and OK to navigate through
the picture.
On the computer - Plug the camera to the rear
USB ports of the computer. Turn the camera ON
and open My Computer. In My Computer, open
Removable Drive (or Removable Disk), the
folder DCIM and then100IMAGE. Open this
folder to view and copy the pictures from the
camera to the computer.
8
Camera Menu
This is the default mode when you turn the
camera ON.
Picture Quality
The camera is default set to 5 Mega pixel. To
adjust the resolution, press MODE and select
Picture Quality. Press to make a selection
and MODE to exit.
Using the internal 32MB Memory:
5M = 22 pictures
3M = 35 pictures
2M = 58 pictures
Burst Snapshot
By default, the camera is set to capture single
images per shot. Burst mode allows you to take
3 pictures simultaneously. To change the setting
to burst mode, press MODE, and select
Burst Snapshot. Press to make a selection
and MODE to exit.
Self Timer
To use the timer (delayed) shot, press MODE,
and select Self Timer. Press to make a
selection (instant, 10 sec, 15 sec or 20 sec) and
MODE to exit.
Date and Time Stamp
To include a date (and time) stamp on the
pictures, press MODE, and select Time
Stamp. Press to make a selection (Date,
Date & Time) and MODE to exit.
9
Video Menu
Press MENU and select and press OK to
confirm. Press the shutter button to start
recording. Press the shutter button again to
stop.
Video Resolution
To adjust the resolution, press MODE and select
Picture Quality. Press to make a selection
and MODE to exit.
Playback Menu
Press MENU and select and press OK to
confirm. Press the shutter button to view the
images in thumbnails. Press to browse
through the pictures and OK to confirm. To
zoom in on the individual images, press ,
and OK to navigate through the picture.
Slide Show
In playback, press MODE, , select Slide
Show and OK to confirm. Press MODE to exit.
Delete (One/All)
In playback, press MODE, , select Delete
(All) and OK to confirm.
Warning: Deleted images are non-recoverable.
Protect
You can protect your pictures from getting
accidentally erased. In playback option, press
MODE, , select Protect, to select ON.
This will protect the currently displayed image.
10
Print (Pict Bridge)
The camera is plug-and-play and PictBridge
ready. In playback, press MODE, , select
Print, to select ON and MODE to exit.
Connect the camera to the printer and print the
selected image.
Settings
To access the settings options, press MENU.
Use to select and press OK.
Date and Time
In Settings, press to select Date and Time
then OK to confirm. Use to navigate
through the selections and to make
changes. Press OK to accept the changes.
Language
In Settings, press to select Language and
OK to confirm. Use to make your selection
and OK to accept the new language.
Format Storage
New SD memory cards may required to be
formatted. In Settings, press to select
Format Storage and OK to confirm.
Warning: Formatting a memory card will erase
all images currently stored in it.
TV Output (NSTC/PAL)
In Settings, press MODE, , select TV
Output. Use to make your selection.
Other manuals for Argus DC-5195
1
Table of contents
Other Argus Digital Camera manuals
Argus
Argus A2F Parts list manual
Argus
Argus DC-5340 User manual
Argus
Argus Instant Load 284 User manual
Argus
Argus Bean3 User manual
Argus
Argus 804 User manual
Argus
Argus DC2200 User manual
Argus
Argus cosina 704 User manual
Argus
Argus QC-5150 User manual
Argus
Argus DC1510 User manual
Argus
Argus DCV-011 User manual
Argus
Argus QC-2185 User manual
Argus
Argus Argus DC-5190 User manual
Argus
Argus DCM-098 User manual
Argus
Argus Quick Click QC-5340 Specification sheet
Argus
Argus Argus DC-1088 User manual
Argus
Argus SHOWMASTER 822 User manual
Argus
Argus DC-5150 User manual
Argus
Argus DC-3195 User manual
Argus
Argus DC1620 User manual
Argus
Argus DC-5150 User manual
