ARGtek 0004 User manual
Wi-Fi + Bluetooth USB Dongle
User's Manual
Install the Drivers and Utilities
Install the Drivers and UtilitiesInstall the Drivers and Utilities
Install the Drivers and Utilities
Before setup, please uninstall IVT Bluetooth software if your computer has installed it before.
1.
1.1.
1. The Instillation program before install 3DSP ireless driver, the installation program will install the
requirement program “IVT BlueSoleil” and “Microsoft PA2 hot fix” (This is not necessary in many
PCs if installed) . The program will install IVT BlueSoleil first. Please press the “Yes” button start install
BlueSoleil
2.
2.2.
2. Select the Language that you want to installation from the combo box, and then press the “OK” button to
continue.
3.
3.3.
3. Please click Next button several times to continue the software installation. In the License Agreement
window, please read license agreement carefully. Select “I accept the terms in the license agreement”
then click “Next” button to continue.
4.
4.4.
4. Select you want to place the program shortcut, and indicate the location of where you want Bluetooth
Software to be stored; if you do not change the default settings, it will be stored under C:
C:C:
C:\
\\
\Program
Program Program
Program
F
FF
Files
ilesiles
iles\
\\
\IVT Corporation
IVT CorporationIVT Corporation
IVT Corporation\
\\
\B
BB
BlueSoleil
lueSoleillueSoleil
lueSoleil Click on “Next” button to continue.
5.
5.5.
5. The Install Shield izard will begin to install the software and copy files to your hard disk. After copy all
the files, the installation will try to install virtual Bluetooth device in your system. It may take a few
minutes, please wait it finishes the installation.
6.
6.6.
6. After finish installation the IVT Bluesoleil, then the install system will continue install. If your system
has not installed the PA2 hotfix yet. The install program will ask you install it first.
7.
7.7.
7. Continue install the 3DSP LAN driver will be stored under C:\Program
Files\3DSP\Bluetooth LAN_usb\. Click the “Next” for continue.
8.
8.8.
8. The Install Shield izard will begin to install the software and copy files to your hard disk. Please press
“Install” for continues.
9.
9.9.
9. hile installation, currently driver is not pass the Microsoft HQL certification. And the system will
promote the caution massage several times. Please press "Continue anyway” to continue. In the Official
release driver will no longer this issue.
10.
10.10.
10.After finish installation, please select reboot your system to finish the installation. Or you can select to
reboot later.
11.
11.11.
11.Please plug the USB dongle in your PC USB port. After a few seconds, another “Found New Hardware”
message will appear briefly, as shown on the fallowing pictures. The system will prompt installation.
Windows will find another new hardware, and the following screen will appear. Select
No, not this time, and
click
next
several times
, then select auto installation driver. Currently driver is not pass the Microsoft
HQL certification. And the system will promote this massage several times. In the future Official release
driver will no longer this issue.
12.
12.12.
12.The system will prompt now installation the driver for the wireless USB combo dongle, select continue
installation. The systems will installation both iFi and Bluetooth drivers, this procedure will repeat
several times.
13.
13.13.
13.
There are two new Bluetooth icons appear on the desktop and the windows task bar respectively when logged
in indows operating system.
Click
Finish
to close the wizard.
14.
14.14.
14.Please remove the Software CD after the installation is complete.
15.
15.15.
15.A Bluetooth icon will appear in your system tray.
Uninstall the Drivers
1.
1. 1.
1.
Go to indows Control Panel, select and start “Add or remove programs”.
2.
2. 2.
2. Click the 3DSP LAN and Bluetooth Card, and then press the “Change” button. The system will ask
you what you want to do with this program. Select “Remove” and press the “Next” button for
remove the program.
3.
3.3.
3. System will ask you again for sure you want to remove it. Click “Continue”for remove the program.
4
44
4
.
..
. Finish removes the program. Please fallow the same method to remove the
IVT BlueSoleil for clean your system.
1.
1.1.
1.
Setting and using of Bluetooth:
Setting and using of Bluetooth:Setting and using of Bluetooth:
Setting and using of Bluetooth:
After starting this mode, it will popup the Bluetooth software (IVT) automatically. It will show you
< elcome to Bluetooth> in the first time. You can define name, type and security grade for the Bluetooth
equipment
After finishing the setup, click <confirm> to enter the main window of IVT software. If want to
search Bluetooth equipments, please confirm Bluetooth function of other Bluetooth equipments start
(some kind mobile phones need to setup their visibility), then click the ball button in the main window of
IVT software to search.
I
f finding any equipment, the name of these equipments will be showed in the orbit near to the ball. Here
take phone communication for example:
Table of contents
Other ARGtek Wireless Router manuals
