ARGON18 GALLIUM 348A User manual
GALLIUM 348A: ASSEMBLY GUIDE
Valid for MY2021 Gallium 348A
Revision 1.0 - 11.30.2020
2
GALLIUM 348A: Table of Contents
For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High-end components, particularly carbon
parts, need extra care when assembled. These components must be installed using a calibered torque wrench to make sure every bolt is at
the right torque setting to prevent damage.
My Gallium
Date of purchase:
Retailer:
Size:
Serial Number:
1. Tools Needed and First Aid Kit ........................................ 3
2. Trouble-shooting / Tips............................................... 4
3. Seat Post Collar Assembly ............................................ 5
4. Seat Post Assembly .................................................. 6
5. Frameset Inspection ................................................. 8
6. Rear Derailleur Hanger Adjustment ..................................09
7. Mechanical Drivetrain Specication..................................10
8. Electronic (Di2) Drivetrain Specication..............................13
09. Electronic Wireless Drivetrain Specication .........................17
10. Frameset Parts.....................................................20
11. Parts’ SKUs and Descriptions* ......................................21
12. Appendix..........................................................22
13. Min/Max Seat Post Insertion........................................23
3
Tools needed for assembly
1: Bearing Cup Press (Park Tool HHP-2)
2: Allen Key Set
3: Grease
4: Utility Pick Set (Park Tool Item #UP-SET)
5: Clean Rags
6: Derailleur Hanger Alignment Gauge (Park Tool Item #DAG-2 or #DAG-2.2)
7: Cables and Housing Cutter
8: Carbon Paste
9: Loctite #242
10: Torque Wrench
First Aid Kit: Essential parts to always have on hand
IN CASE OF EMERGENCY…THIS MIGHT SAVE YOUR RIDE!
1: Spare rear derailleur hanger (SKU: 38883)
2: Seat clamp (SKU: 80546)
GALLIUM 348A: 1. Tools Needed and First Aid Kit
38883 80546
4
GALLIUM 348A: 2. Trouble-shooting / Tips
SPECIFICATIONS
Tire Clearance
Up to 28mm tire clearance.
Seat Post
27.2mm (Argon 18 ASP-6600 Carbon Seat Post Included)
Seat Post Clamp
30.7mm
Bottom Bracket
BB86 (Press-t)
Headset
FSA No 37 + 3D Press-t (Bearing 1 1/8” , 36°x45° top and 1 1/2” , 36°x45° bottom + FSA TH-881-1 Compressor included)
IMPORTANT:
No more than 30mm of spacers can be placed between the stem and the top cap of the 3D system.
The steerer must be trimmed no more than 5mm above the stem. The use of more than 5mm of spacers
above the stem could void the eciency of the compressor.
These practices will automatically cancel any warranty claim against the manufacturer.
5
GALLIUM 348A: 3. Seat Post Collar Assembly
Assemble the seat post collar with the seat post.
Apply carbon paste on the seat post where it
inserts inside the frame. Tighten the bolt at 4 Nm.
CARBON
PASTE
4Nm
2
6
GALLIUM 348A: 4. Seat Post Assembly
The seat post is supplied fully assembled.
It’s equipped with a spring-loaded head
for easy installation of the saddle.
1. Unscrew both bolts slightly until the top
clamp (a) and the cradle (b) are separated
enough to insert the saddle rail. Do not
unscrew the bolts completely.
2. Screw both bolts in order to adjust the
angle of the saddle and clamp the rail.
3. Tighten bolts at 4.5Nm.
a
b
4,5 Nm
3.1
3
7
GALLIUM 348A: 4. Seat Post Assembly
The top clamp (a) and the cradle (b)
can be ipped to change the saddle
oset between 15 or 25mm.
25mm oset 15mm oset
a a
b b
8
GALLIUM 348A: 5. Frameset Inspection
Parts installed on the frame Description Screw Torque Detail
type Nm
Bottle cage Screw (4) 5 mm 3 Nm Grease
Chain stay cable guide Screw (2) 3 mm 1.5 Nm Grease
Rear derailleur hanger Screw (2) 3 mm 4 Nm Loctite
BEFORE ASSEMBLING YOUR NEW GALLIUM, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Frameset parts (see p.9)
2. Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
3. For reference, check serial number and write it on p.2
4. All the necessary bolts (refer to Frameset Parts, p.9)
5. For optimal shifting performance, use a derailleur hanger alignment gauge to make sure that the derailleur hanger is straight (p.10)
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their torque
specications.
9
GALLIUM 348A: 6. Rear Derailleur Hanger Adjustment
1. Ensure that the derailleur hanger is aligned.
2. Use Derailleur Hanger Alignment Gauge
like Park Tool Item #DAG-2 or #DAG-2.2.
For any assistance, visit Park Tool’s website:
parktool.com/product/derailleur-hanger-
alignment-gauge-dag-2
10
Start installation at this end.
Insert derailleur cables with hoses using plastic caps.
Insert hydraulic brake hose as shown.
BR = Brake Hose
DC = Derailleur Cable (mech.)
DH = Derailleur Housing (mech.)
BR
DC+DH
DC+DH
GALLIUM 348A: 7. Mechanical Drivetrain Specication
CABLE STOPPER
CABLE GUIDE
Table of contents
Other ARGON18 Bicycle manuals
ARGON18
ARGON18 Road Racing User manual
ARGON18
ARGON18 DARK MATTER 282A User manual
ARGON18
ARGON18 GALLIUM PRO DISC 338A User manual
ARGON18
ARGON18 MY2016 Nitrogen Pro User manual
ARGON18
ARGON18 E-118 NEXT User manual
ARGON18
ARGON18 KRYPTON XROAD 213C User manual
ARGON18
ARGON18 GALLIUM PRO DISC 338A 2021 User manual
ARGON18
ARGON18 GALLIUM 279A User manual
ARGON18
ARGON18 E-117 TRI+ User manual
ARGON18
ARGON18 KRYPTON 212A User manual
ARGON18
ARGON18 GALLIUM PRO DISC 246A User manual
ARGON18
ARGON18 GALLIUM CS DISC 362A User manual
ARGON18
ARGON18 RADON User manual
ARGON18
ARGON18 E-119 TRI User manual
ARGON18
ARGON18 Dark Matter User manual
ARGON18
ARGON18 E-112 User manual
ARGON18
ARGON18 E-116 User manual
ARGON18
ARGON18 E-119 TRI+ User manual
ARGON18
ARGON18 GALLIUM PRO User manual
ARGON18
ARGON18 GALLIUM PRO 347A User manual
