13V 06/22
• WARNING: do not use the convector with a controller or any other
external device that activates the appliance automatically, as there may
be a risk of re if the fan heater is covered or incorrectly positioned.
• Disconnect the mains power when the appliance is not used or for
cleaning operations.
• To disconnect the convector, turn off the appliance by turning the heating
mode adjustment knob, located on the side and remove the plug from
the socket.
• Avoid placing ngers or foreign objects in the air inlet/outlet grilles, as
this may lead to electric shock or re and may damage the convector.
To avoid the risk of re, do not block the grilles or tamper with them in
any way while the convector operates.
• Do not use the convector if the cord or plug is damaged. If the power
cable is damaged, it must be replaced by the manufacturer or its
technical assistance service or in any case by a person with a similar
qualication, in order to prevent any risk.
• Do not place any objects on the cord and do not bend it. During
operation, the cord must be entirely unwound.
• It is not advisable to use extension cords, as these may overheat and
cause the risk of re. Do not use a single extension cord to operate
more than one convector.
• The convector heats up signicantly during operation. Risk of burn.
• To avoid injury, do not allow skin to come into contact with a hot surface.
Use the handle to move the convector. Keep ammable materials, such
as furniture, cushions, blankets, paper, cloths, curtains and suchlike at
least 1 m from the front and back
• Do not immerse the cord, plug or any other element of the panel in
water or other liquids.
• Do not touch the plug or convector with wet hands.
• Avoid using the convector in dusty environments or in the presence of
ammable vapors (e.g. in workshops or garages).
• Do not place the convector above or near another heat source.
WARNING: AVOID COVERING THE CONVECTOR TO PREVENT IT
FROM OVERHEATING.
