AREQUIPMENT E400 User manual
1
USER MANUAL: E400 LS (Lateral Sliding)
MAN AR 63/07/18/0
3
Index
Basic Information
What’s the E400? ………………………………………………………………………………..……….….……………………...4
1.Specifications E400…………………………………………………………………….……….…..…………………………….5
2.Electric Components………………………………………………………………………………………….……….………...6
3.Electric Installation……………………………………………………………………………………………….…………..…..7
Instructions - Loading/Unloading
4.Unloading Operation: (with trolley installed) ……………………………………………………………………..…8
5.Loading Operation (with trolley installed) …………………………………….……………………………….……10
6.Emergency button………………………………………………………………….………………………………………...…11
7.Unloading Operation: (without trolley installed) ………………….………………………………..……………12
8.Loading Operation (without trolley installed) ………………………………………………………..……………13
9.Lateral Sliding (Optional) ……………………………………………………………………………………..……………..14
Safety – Maintenance- Fixation
10.Safety warnings……………………………………………………………………….……………………………….…..…..15
11.Scheduled Maintenance…………………………………………………………………….………………………………16
12. Fixation …………………………………………………………………………………………………………………………...17
4
E400
The E400 is an electric loader for Mondial Stretcher. The main function is the attachment of
the stretcher to the table and it’s usable in different types of vehicles.
The electrical power eases the access to the ambulance cell and enables the user to make less
effort.
Its structure is made of a high resistance alloy and the attachment points are reinforced in
steel. All aluminum profiles were designed to ensure the mechanical resistance and provide a
pleasant visual aspect.
Optional: Android app
5
1. Specifications
•Weight: 105 kg
•Maximum load capacity: 300Kg
•Dimensions: 2220 x 635 x 475 mm
•3 attachment points
•In Stainless Steel
•Electrically powered movement for loading and unloading
•Security system with power cut
•12V DC Power
•Lateral Movement
6
2. Electric components
Picture 8
7
3. Electric installation
Plug the red wire positive (+) and black negative (-) on 12V 80Ah battery. And use
cables with section 16mm2.
8
4. Unloading Operation: (with trolley installed):
Action
Effect
1.1
Pull the red handle for a few
seconds to release the
hooks (6,7).
- It causes the movement of the central module around 5 cm,
assuring that the upper side hooks are loose/released.
- Central led stays green during this movement.
- Central led stays intermittent red during this movement
(intermittent indefinitely).
- Buttons’ light (13,14) turn on and remains on for 10 min, if
there are no further actions.
- After starting point 1.1 the red handle has no more fuction.
1.2
Press once the button no.
14 to activate.
-The central module moves down until position 8, awaiting
new action.
- Central led stays green during this movement.
- Central led stays intermittent red until you find position 8
(intermittent indefinitely).
- Buttons’ light (13,14) turn on and remains on for 10 min, if
there are no further actions.
-If you press button 13 or 14 without starting point 1.1 there is
no movement.
1.3
Press once the button no.
14 to activate
-The central module will remain fixed, awaiting further
confirmation action.
- Central light turns to intermittent green (intermittent
indefinitely).
- Buttons’ light (13,14) turn on and remains on for 10 min, if
there are no further actions.
1.4
Press once the button no.
14 to activate
-The central module moves to the position (11,12) and is
released. It stops for 3 seconds and goes up again until the
center hooks are completely closed (about 5 cm)
-The central light turns off
-Buttons’ light (13,14) turn on and remains on for 10 min, if
there are no further actions.
1.5
Press once the button no.
13 to activate
-After starting point 1.1 the trolley can still climb back up until
(4,5) where it stops.
-After starting point 1.2 the trolley will move until the unloading
is complete.
-After starting point 1.2, if the button 13 or 14 is pressed the
system stops and the central red light is intermittent
(indefinitely).
1.6
Press once the button no.
-After point 1.4, if you press button 14 the center hooks may
9
IMPORTANT: THE OPERATOR MUST ALWAYS ACCOMPANY THE STRETCHER DURRING THE UNLOADING PROCESS
5. Loading Operation (with trolley installed):
Action
Effect
2.1
Install the trolley until the
-There is no effects
14 to activate
open.
1.7
Press once the button no.
13 or 14 to activate
-Before starting point 1.1, if button 13 or 14 is pressed the
central red light will be intermittent.
10
central module fits
2.2
Press once the button no.
13 to activate
- The central module moves up until position 8, awaiting new
action.
- Central led stays green during this movement.
- Central led stays intermittent red until you find position 8
(intermittent indefinitely).
- Buttons’ light (13,14) turn on and remains on for 10 min, if there
are no further actions.
2.3
Press once the button no.
13 to activate
-The central module remains fix, awaiting further confirmation
action.
- Central light turns to intermittent green (intermittent
indefinitely).
- Buttons’ light (13,14) turn on and remains on for 10 min, if there
are no further actions.
2.4
Press once the button no.
13 to activate
-The central module moves to the position (4,5) where the trolley
is fixed. The central light turns off. The buttons’ light (13,14) turn
on and remains on for 10 min, if there are no further actions.
2.5
Press once the button no.
13 to activate
-After starting point 2.2 the trolley will move until the loading is
complete.
2.6
Press once the button no.
13 or 14 to activate
-After starting point 2.2, if the button 13 or 14 is pressed the
system stops and the central red light is intermittent (indefinitely).
IMPORTANT: THE OPERATOR MUST ALWAYS ACCOMPANY THE STRETCHER DURRING THE LOADING PROCESS
Table of contents
