Arcora BLANCUS 45 Mounting instructions
BLANCUS 45 Manual Use
Please read this manual carefully before using the product .
1.0 OVERVIEW
ATTENTION：Please read this manual carefully before
using BLANCUS 45.
INTRODUCTION
BLANCUS 45 Micro Automatic Floor Scrubber is a machine which uses the
mechanical movement of the disc brush and the chemical action of water and
detergent solution to clean the hard floor with various stains and at the same
time it can collect both the removed stains and the detergent solution not absorbed
by the floor
RANGE OF APPLICATION
This machine is suitable for quick mechanized floor cleaning of small
office buildings, hotels, restaurants and workshops, which makes cleaning
operations more efficient and faster.
This device is not suitable for using in the rain or under a water gun. It is strictly
forbidden to use this equipment to collect dangerous dust or flammable liquid in
a flammable and explosive environment. In addition, the device is not suitable
for using as a transport vehicle.
2.0 SUMMARY OF SAFETY MATTERS
ATTENTION：The operator should read this manual carefully.
●Be familiar with all the design, control methods, and functions of the scrubber
before starting any work.
●When using the scrubber for the first time, the operator should place it in an
open area to understand its various functions.
●Before starting any operation, check the status of the scrubber and its
components under normal conditions and during operation.
●If the scrubber is not working properly, the device cannot be used.
●The operator must use it in the appropriate application area (cleaning the hard
floor) when operating the scrubber.
●Pay attention to obstacles in the workplace, such as stairs, shelves, etc.,and pay
attention to the surrounding people, especially children.
● Use a suitable cleaning agent (When cleaning the scrubber, use the cleaning
agent only in accordance with the manufacturer's instructions for use, and use
the cleaning agent at the appropriate dosage and limit.
●This scrubber should only be maintained and serviced by suitably trained
personnel using appropriate tools.
●Turn off the power or remove the battery when cleaning or maintaining the
scrubber.
●Do not use high pressure water or steam equipment to clean the scrubber.
●Prevent electrical components from entering the water.
ATTENTION：▲ Do not use this scrubber to clean flammable liquids, solvents,
fuel oil, reactive metal water vapor or flammable dust.
▲Risk of electric shock. Do not use damaged wires. Unplug the cord
before servicing.
▲For safety reasons: Using an incompatible battery charger may
result in battery damage or fire.
3.0 TECHNICAL PARAMETERS FOR THE PRODUCT
Item
Parameters
Rated voltage
DC24V
Working width
45.5cm
Water absorption width
50cm
Work efficiency
600 /h
Disc brush diameter
22.8cm
Disc brush rotation rate
200rpm
Disc brush motor
2*200W
Disc brush pressure
20kg
Water absorption motor
200W
Vacuum degree
120mbar
Turning radius
30cm
Clean water tank capacity
3.5L
Sewage tank capacity
4L
Noise level
75dB
Battery pack
2*8.8Ah-24V (Lithium battery)
Battery weight
1.9*2kg
Total weight of the machine
22kg
Gross weight
34kg
Package dimensions
127.5*60*45（CM）
4.0 THE PACKAGE OF THE MACHINE
Packing size is as follows：
length：1275mm
width： 600mm
height： 450mm
5.0 STRUCTURE
1.Water suction switch 2.battery indicator 3.Disc brush switch
4.Overload reset button 5.Power switch 6.Screw
7. Sewage tank cover 8. Sewage tank 9.Right battery
10.Right battery 11.Upright trigger lock 12.Water valve switch
13. Charging socket 14. Clean water tank lock 15. Threaded tank cover
16. Sewage tank swing buckle 17.Clean water tank 18. Machine lock button
19. Parabolic squeegee wheels 20. Battery pull buckle 21.Rubber strip
22. Disc brush
6-1
6-2
6.0INSTRUCTIONS FOR USE
6-1 The description picture of disc
brush installation：picture 6-1
1. According to step 1 in the picture,
press the disc brush to the
positive drive buckle to the end.
2. Rotate the two disc brushes in
the direction of step 2 in the
picture to fasten the disc brush .
6-2.battery installation
instructions:
See picture 6-2.
1. Distinguish the left and right
direction of the battery.
2. As shown in the arrow, align
the mounting slots of the
battery.
3. Push the battery to the end
along the slot and tighten the
battery.
6-3-（1） 6-3-（2） 6-3-（3）
ATTENTION：When refilling the clean water tank, it is necessary to
empty the sewage tank.
ATTENTION：Do not fill the water in the sewage tank or dirty water into
the clean water tank, which will result in blockage of the pipeline
6-3 The description
picture of filling the
water ：
Picture 6-3-（1）~ (3)
1. As shown in step 1 of
Figure 6-3-(1), push
the lock of the clean
water tank to the
inside.
2. Lift the clean water
tank up as shown in
step 2 of Figure
6-3-(1).
3. Twist the water tank
cover as shown in
Figure 6-3-(2).
4. Inject water into the。
water tank as shown in
Figure 6-3-(3).。
6-4-（1） 6-4-（2）
6-4The description picture of
disassembling sewage tank ：
Picture 6-4-（1）-（2）
1. Move the sewage tank swing
buckle up as shown in Figure
6-4-(1).
2. As shown in Figure 6-4-(2),
the upper end of the sewage
tank is opened outwards,and
then remove the tank from the
joint.
6-5The description picture of taking
apart of the machine：picture6-5
1. Press the machine locking buckle。
2.Move the handle away from the
lock。
3. Turn the head down.
6-6
6-6 The description picture of control
panel：picture 6-6
1.Disc brush motor overload protection
button
2.Power switch
3.Water suction motor overload
protection button
4.Disc brush switch
5.Battery indicator (red, yellow, green)
Description：When the red, yellow, and
green indicators are on, it indicates that
the battery is fully charged. When the
green indicator is off, the red and yellow
indicators are on, it indicates that the
power consumption has exceeded
half.When only the red indicator is on and
flashing, it indicates that the battery is
low, and should be charged in time.
6.Clean water switch
7.Water suction switch
6-7 Battery disassembly：picture 6-7
1. Pull the battery puller in the 1 direction
to the end as shown in Figure 6-7.
2. Pull the battery in the direction of 2 as
shown in Figure 6-7.。
Table of contents
