Arcora International M5 PLUS User manual
OPERATION MANUAL
Marsstraße 9 ● 85609 Aschheim near Munich - Germany
Tel.: +49(0)89 - 14 33 29 30 ● Fax: +49(0)89 - 14 33 29 329
You probably want to get to know your new hoover as quickly as possible and be able to operate
it safely. Please read these instructions for use before you start using the appliance.
To avoid accidents and damage, start with the chapter >>Safety instructions<< and be sure to
observe the instructions listed here.
Dear customers
Content
Description of the vacuum cleaner
Operating elements
Handling
Safety instructions
Section
Section
Section
Section
Section 1 Description of the vacuum cleaner
The M5PLUS vacuum cleaner can be used as a dry vacuum cleaner for cleaning large areas in offices, hotels,
restaurants, doctors' practices, shops. The vacuum cleaner can be used to clean hard floors (stone, parquet, plastic)
as well as soft floors (carpets, upholstered furniture, curtains). The robust and modern construction guarantees a
long service life and convenient operation with low usage costs.
Technical Details
Power supply:
Power cable:
Max. capacity:
Vacuum:
Features: Protective insulated (class II),
interference-suppressed, CE-sign
Section 2 Operating elements
Slide control of the
suction power
Metal plug tube
Upholstery nozzle
Crevice nozzle
Brush nozzle
Fleece filter bag
Floor nozzle
Section 2
The flexible suction hose with rotating end pieces facilitates the
operation of the accessories. The bleed valve is on the handle of
the suction hose.
With the slider of the valve you can adjust the suction power,
especially recommended for curtain cleaning.
Connect the metal tube with the handle of the suction hose and
the accessory to the pipe.
Upholstery nozzle
With the upholstery nozzle
you can dust off upholstered
furniture, mattresses, pillows,
curtains, etc.
Brush nozzle
The brush nozzle is suitable
for extracting uneven
surfaces, such as profile
strips.
Crevice nozzle
The crevice nozzle is suitable
for the suction of wrinkles,
joints and corners or niches
that you can’t reach with the
floor nozzle.
Operating elements
Section 2
The floor nozzle is the most commonly used element of the
accessory. It is suitable for large flat surfaces such as carpets or
floors. For vacuuming smooth
floors such as PVC, parquet or
stone, the floor nozzle is
additionally equipped with a brush.
If necessary, press your foot on the
rocker arm to extend or lower the
brush. Carpets and carpets should
be vacuumed without a brush. To
do this, push the toggle switch forwards.
Floor nozzle
Fleece filter bag
The extremely tear-resistant fleece filter bags offer a high
degree of dust retention and, compared to paper filter bags,
allow significantly longer vacuuming cycles.
Attention: To insert or replace
the bag you must first pull out
the suction hose.
Operating elements
Section 3 Handling
Switch button
Housing
Connection
opening for the
suction hose
Locking lever
Section 3
Before switch on the vacuum cleaner:
♦ Please make sure that the fleece filter bag is correctly
inserted in the housing inlet. Do not use the vacuum
cleaner if no dust bag is inserted.
♦ Insert the suction hose into the connection opening and
turn it slightly to the right or to the left to lock.
♦ Insert metal pipes into each other and put them together
with the handle of the hose. Place the necessary nozzle
on the lower end of the suction pipe.
♦ Plug the power plug into the socket.
♦ Press the switch button to switch on the device.
After vacuum
Once cleaning is complete, turn off the power.
To switch off, tap on switch button.
Disconnect the power plug from the socket.
Replacing the dust bag
. ♦ Turn off the vacuum cleaner and pull out the plug
. ♦ Remove the suction hose from the device
♦ Unlock the dust bag chamber with the cover lever,
remove the cover.
♦ Grasp the dust bag and pull it out.
♦ Insert a new dust bag into the dust bag chamber.
♦ Close the lid again, check before commissioning
whether all components are properly installed.
Handling
Section 3
Replacing the foam and motor protection filter.
From time to time, the foam and motor protection filters
must be changed. In the event of visible contamination, you
can clean them by rinsing in lukewarm water with a little
detergent and after complete drying, replace the cover.
HEPA-Filter
♦ Remove three screws in the lid, take off the lid and
remove the foam filter.
♦ Insert a new or cleaned filter.
♦ Put the lid on and tighten the screws.
Unscrew the
the screws Remove
the lid
Foam filter
Handling
Section 3
Motor protection filter
♦ Turn off the vacuum cleaner.
♦ Remove the lid.
♦ Remove the motor protection filter from the motor cover.
♦ Insert a new or cleaned motor protection filter.
Lid insert
Motor protection filter
Screws
Lid insert
Motor protection
filter
Handling
Other Arcora International Vacuum Cleaner manuals
