ARC R82 User manual
BAG 01
BAG 01
BAG 01
BAG 01
0201
BAG 01
TH CA GE
TH
TH
CA
NOTICE
R803059
R803059
R805052
R802020
R805052 R812040
R801104
R801104
R802019
R801111
R804020
R105203
R105203
R812041
R801020
R801040
R802020
R801020
R801040
R105105
R803040
R822003
R805010
(Included in R828004)
R828004
R804030
R806020
R806020
R805201
R813001
R805201
R105104
R805201
R105105
R105104 3x6 Round Screw (10)
R803040 Servo Saver Post
R804030 Front Belt 201
R805201 4x8mm Flat Screw (10)
R806020 12x18x4 Ball Bearing (4)
R822003 R8.2 Main Chassis
R801104 One Way Plastic Shims
R801111 Pulley Set -Front
R802019 Front One Way
R803059 Front One Way Cup (2)
R804020 O'Ring 10x1.5 (6)
R105105 3x8 Round Screw (10)
R105203 3x6mm Flat Screw (10)
R801020 Downstop Nut Holder (2)
R801040 Bearing Bushing -Solid Axle (2)
R802020 Front Upper Arm Bracket Base
R805052 4x8mm Set Screw (10)
R812040 R8.1 Front Bulkhead-L V2018
R812041 R8.1 Front Bulkhead-R V2018
1:1 Scale
1:1 Scale
=Apply Thread Lock Adhesive =Apply CA Glue =Apply Grease
R8.2 CHASSIS WEIGHT ADJUSTMENT
R813001(15g) x2
30g weight increase in front end.
The R8.2 Chassis weight can be adjust by using R828004 R8.2 Chassis weight holder and R813001 R8.1 Slide
Weight -Brass 15g, More weight in front end will increase stability ,The weight adjustment system can add
R813001x1 of 15g or 2pcs of 30g.
Option Parts (Not Included)
Option Parts (Not Included)
R105203
3x6mm Flat Screw (10)
R105104
3x6 Round Screw (10)
R805201
4x8mm Flat Screw (10)
R806020
12x18x4mm Ball Bearing (4)
NOTICE
Initial setup of the front one way axle, please
adjust belt tension after first run.
Loosen
Tighten
R813005 Dowstop Adjust Screw (4)
R805052
4x8mm Set Screw (10)
R105105
3x8 Round Screw (10)
BAG 01
0403
BAG 01
BAG 01
BAG 01
2
2
3
3
1
1
TH
CA
CA
NOTICE
R802110
R807010
R802008
R805101
R802110
R808010
R801108
R105104
R106010
R106010
R805101 4x6 Round Screw (10)
R105104 3x6 Round Screw (10)
R106010 5x8x2.5mm Ball Bearing (4pcs)
R801108 Ackerman Adjustment Shims 0/+1.5
R802008 Servo Saver Set
R802110 Servo Saver Tower
R807010 Servo Saver Spring
R808010 Ackerman Plate 8.5mm Carbon
1:1 Scale
1:1 Scale
R105104
3x6 Round Screw (10)
R106010
5x8x2.5mm Ball Bearing (4)
R805101
4x6 Round Screw (10)
5mm When track has “High Traction”
or want to reduce steering
When track has “Low Traction”
or want to increase steering
DEFAULT SETUP
NOTICE
R801111
R806006
R805045
R805045
R806100
R806100
R801041
R801041
R806006
R812007
R803011
R801112
R801041 Bearing Bushing -Middle Shaft (2)
R801111 Pulley Set -Front
R801112 Pulley Set -Middle
R803011 Middle Shaft
R805045 E-Clip 5mm (6)
R806006 6x13x5 Ball Bearing (2)
R806100 Pin 2.5x11.8 (6)
R812007 R8.1 Middle Shaft Block
1:1 Scale
R806100
Ø2.5x11.8 Pin (6)
R806006
6x13x5mm Ball Bearing (2)
R805045
E-Clip 5mm (6)
R805010
(Included in R828004)
R828004
R813001
Option Parts (Not Included)
R813001(15g) x1
15g weight increase in front end.
0605
1:1 SCALE
R8.2 BAG 01 PARTS LISTR8.2 BAG 01 PARTS EXPLORE VIEW
1:1 SCALE
R8.2 BAG 01 OPTION PARTS EXPLORE VIEW
OPTION PARTS LIST
OPTION PARTS
R805101
R802019
R801111
R804020
R801104
R803011
R806006
R801041
R806100
R805045
R822003
R822003
R812041
R801020
R828004
R813005
R805010
(Included in R828004)
R803040
R806020
R801040
R105203
R812041
R802020
R805052
R805052
R105105
R106010
R802110
R807010
R802008
R802008
R802110
R106010
R105104
R812007
R801041
R806006
R801111
R806100
R805045
R801104
R805201
R808010
R801108
R105104
R801020
R805201
R105104
R803059
R803059
R804030
R806020
R801040
R801020
R812040
R813001
R801112
R802020
R105105
R805010
3x5mm Flat Screw (10)
R105203
R105104 3x6 Round Screw (10)
R105105 3x8 Round Screw (10)
R105203 3x6mm Flat Screw (10)
R106010 5x8x2.5mm Ball Bearing (4pcs)
R801020 Downstop Nut Holder (2)
R801040 Bearing Bushing -Solid Axle (2)
R801041 Bearing Bushing -Middle Shaft (2)
R801104 One Way Plastic Shims
R801108 Ackerman Adjustment Shims 0/+1.5
R801111 Pulley Set -Front
R801112 Pulley Set -Middle
R802008 Servo Saver Set
R802019 Front One Way
R802020 Front Upper Arm Bracket Base
R802110 Servo Saver Tower
R803011 Middle Shaft
R803040 Servo Saver Post
R805010 3x5mm Flat Screw (10)
R813001 R8.1 Slide Weight-Brass 15g (2)
R813005 Dowstop Adjust Screw (4)
R828004 R8.2 Weight Holding Bar-Front
R803059 Front One Way Cup (2)
R804020 O'Ring 10x1.5 (6)
R804030 Front Belt 201
R805045 E-Clip 5mm (6)
R805052 4x8mm Set Screw (10)
R805101 4x6 Round Screw (10)
R805201 4x8mm Flat Screw (10)
R806006 6x13x5 Ball Bearing (2)
R806020 12x18x4 Ball Bearing (4)
R806100 Pin 2.5x11.8 (6)
R807010 Servo Saver Spring
R808010 Ackerman Plate 8.5mm Carbon
R812007 R8.1 Middle Shaft Block
R812040 R8.1 Front Bulkhead-L V2018
R812041 R8.1 Front Bulkhead-R V2018
R822003 R8.2 Main Chassis
R105104
3x6 Round Screw (10)
R105203
3x6mm Flat Screw (10)
R105105
3x8 Round Screw (10)
R805201
4x8mm Flat Screw (10)
R806020
12x18x4mm Ball Bearing (4)
R106010
5x8x2.5mm Ball Bearing (4)
R805101
4x6 Round Screw (10)
R806100
Ø2.5x11.8 Pin (6)
R806006
6x13x5mm Ball Bearing (2)
R805045
E-Clip 5mm (6)
R801020
R813005
R812040
R805052
4x8mm Set Screw (10)
BAG 01
0807
BAG 02 BAG 02
BAG 02
2
2
1
2
2
1
Less steering and more initial corner speed.
More steering and less initial corner speed.
DEFAULT SETUP
TH
TH
TH
TH
TH
TH
TH
+2.0mm (Same position with R801022)
+3.5mm (In between +2.0mm and +5.0mm)
+5.0mm
(Shortest front low arm minmize steering)
NOTICE
R105404 3x10mm Set Screw (10)
R802006 Front Upper Arm Bracket
R805102 4x8 Round Screw (10)
R805105 4x14 Round Screw (10)
R801090
R801090
R105101
R105101
R801015
R803015
R801015
R803015
R105104
R802006
R802029
R805103
R801094 (1mm)
R801094 (2mm)
R805103
R803031
R801021
R105104
R105105
R802041
R801022
R803014
R803014
R105404
R801220
R801220
R105404
R105105
R805102
R802029
R805102
R802006
R105104
R802041
R105104
R801015
R801021
R805105
R801023
R805105
R812034
R812034
R803031
R801023
R801015
R801015
R802041
R801021 R802041
R105101 2x5mm Cap Screw (10)
R105104 3x6 Round Screw (10)
R105105 3x8 Round Screw (10)
R801015 Front Low Arm Set
R801021 Front Low Arm Holder (4)
R801090 Ball End 5.8mm (4)
R801094 C Spacer Set 1mm/2mm/3mm
R802041 Front Shock Mount S (2)
R803014 Anti Roll Bar Ball Head (2)
R803015 Anti Roll Bar Screw (2)
R803031 Front Low Arm Pin 3x77.8
R805103 4x10 Round Screw (10)
1:1 Scale
1:1 Scale
R802087
Front Down Stop Arm-Alu (2)
Option Parts (Not Included)
Option Parts (Not Included)
Option Parts (Not Included)
R105105
3x8 Round Screw (10)
R105104
3x6 Round Screw (10)
R105101
2x5mm Cap Screw (10) R819005 Adjustable Front Low Arm Set
New design front low arm set for ARC R8.1/R8.2
series car, the new shorter low arm will reduce
steering and increase response of the car.
It improves the handling of the car on high
traction and reduce the steering of the car,
adjustable low arm holder allowed driver to
switch the low arm from +2mm (Standard Arm)
to +5mm(Short Arm).
R802029 4x8x1mm Shims (8)
4x8x1mm Aluminum shims are designed put under front
upper arm bracket. It can adjust roll center in front end,
more shims will lower the roll center also create more
traction in front end.
Maxima with 2mm shims under bracket.
R805102
4x8 Round Screw (10)
R805103
4x10 Round Screw (10)
BAG 02
1009
BAG 02 BAG 02
2
3
3
1
RR805307
3x6mm Set Screw (10)
GE
Front Upper Arm MediumFront Upper Arm Long Front Upper Arm Short
NOTICE
Default
R801023 Suspension Bracket Insert-Open (8)
R801072 Front Upper Arm (2)
R801094 C Spacer Set 1mm/2mm/3mm
R803033 Front Upper Arm Pin 3x49
R805307 3x6mm Set (10)
R105105 3x8 Round Screw (10)
R802086 7.9mm Ball End Long-Alu (4)
R804003 7.9mm Ball End Nut (4)
R808040 Front Steering Plate Carbon (2)
1:1 Scale
R801023
R802086
R802086
R804003
R801094 (2mm)
R805307
R801072
R803033 R801094 (1mm)
R801094 (3mm)
R801023
R804003
R105105
R808040
R105105
R808040
R802086
R802086
R802032
R803051
(0.5mm)
R803051
(0.5mm)
R806020
R802090
R803064
R803062
R807004
R105401
R806101
R801055
R806100
R105401 3x3mm Set Screw (10)
R801055 Steering Block
R802032 Front Tire Hook (2)
R802090 Front Wheel Axle - Alu (2)
R803051 12.1x15x0.5mm Shims (10)
R803062 Front CVD Shaft (2)
R803064 CVD Insert (2)
R806020 12x18x4 Ball Bearing (4)
R806100 Pin 2.5x11.8 (6)
R806101 Pin 3x19.8 (6)
R807004 Tire Hook Spring (4)
1:1 Scale
R806100
Ø2.5x11.8 Pin (6)
R105401
3x3mm Set Screw (10)
R806101
Ø3x19.8 Pin (6)
R803051
12.1x15x0.5mm Shims (10)
R806020
12x18x4mm Ball Bearing (4)
1:1 Scale
R809003 R8.0 Air Disk Set (F&R)
Increase stability and more precise handling
Option Parts (Not Included)
Upper Side
Check the direction
before assembly
Check the direction
before assembly
Low Side
Upper Side
Low Side
R105105
3x8 Round Screw (10)
RIGHT SIDE LEFT SIDE
NOTICE
x2 x2
x2
BAG 02
1211
BAG 02
BAG 02
BAG 02
GE
TH
R105105
3x8 Round Screw (10)
R805010
3x5mm Flat Screw (10)
TH
TH
TH
NOTICE
Front upper arm width setup
NOTICE
Front low arm width setup
NOTICE
NOTICE
R818004
R105105
R105105 3x8 Round Screw (10) R805010 3x5mm Flat Screw (10)
R105105 3x8 Round Screw (10) R818004 R8.1 Front Shock Tower
1:1 Scale
1:1 Scale
R105105
3x8 Round Screw (10)
R803035
R803035
R803016
R803016
R10107A
R10107A
R10107A
R805010
R105105
R105105
R10107A
R803016
R803016
R10107A Ball Joint 4.9mm Open (6pcs)
R803016 Ball Head 4.9mm (4)
R803035 3mm X 62mm Rod (2)
Default Position
49.5 mm
Initial Setup
6mm
6mm
1413
BAG 02
1:1 SCALE
OPTION PARTS LIST
R8.2 BAG 02 OPTION PARTS EXPLOR VIEW
2
3
1
R105401
3x3mm Set Screw (10)
R806005
5x10x4mm
Flange Ball Bearing (2) R807016
R801220
R803015
R805010
(Included in R809003)
R801015
R805105
R801023
R812034
R802087
R105404
R105401
R809003
R802006
R802029
R805102
R802006
R802029
R805105
R803031
R105105
R803014
R105101
R801090
R801094 (1mm)
R801094 (1mm)
R812034
R801023
R105401
R105401
R105401
R823003
R806005
R105401 3x3mm Set Screw (10)
R806005 5x10x4 Flange Ball Bearing (2)
R807016 Front Anti-Roll Bar 2.4mm
R823003 Anti-Roll Bar Stopper 2.0-2.4 (2)
1:1 Scale
R105105
3x8 Round Screw (10)
R805102
4x8 Round Screw (10)
R805105
4x14 Round Screw (10)
R105101
2x5mm Cap Screw (10)
R805010 3x5mm Flat Screw (10)
R805105 4x14Round Screw (10)
R809003 R8.0 Air Disk Set (F&R)
R812034 Front Low Arm Holder-Alu (4)
R105404 3x10mm Set Screw (10)
R801220 Front Low Arm-Short
R802029 4x8x1mm Shims (8)
R802087 Front Down Stop Arm-Alu (2)
R805010
3x5mm Flat Screw (10)
R802029
4x8x1mm Shims (8)
R105404
3x10mm Set Screw (10)
NOTICE
Initial front droop setup
0mm
Please setup the front droop as above instruction.
1615
1:1 SCALE
R8.2 BAG 02 PARTS LISTR8.2 BAG 02 PARTS EXPLORE VIEW
R803015
R105104
R802041
R805103
R818004
R801090
R105101
R801015
R802006
R803033
R801094 (2mm)
R801094 (1mm)
R801094 (3mm)
R805010
R803016
R10107A
R803062
R105105
R803035
R802090
R803051
R806020 R806020 R803051
R802086
R802032
R105401
R804003
R803064
R10107A
R805307
R801072
R801023
R803014
R806100
R105401
R807016
R823003
R806005
R801055
R803016
R808040
R105105
R804003
R807004
R802086
R806101
R805102
R802006
R801015
R801094 (1mm)
R801094 (2mm)
R805103
R105105
R105104
R803031
R105401
R105401
R801021
R801021
R803031 Front Low Arm Pin 3x77.8
R803033 Front Upper Arm Pin 3x49
R803035 3mm X 62mm Rod (2)
R803051 12.1x15x0.5mm Shims (10)
R803062 Front CVD Shaft (2)
R803064 CVD Insert (2)
R804003 7.9mm Ball End Nut (4)
R805010 3x5mm Flat Screw (10)
R805102 4x8 Round Screw (10)
R805103 4x10 Round Screw (10)
R805307 3x6mm Set (10)
R806005 5x10x4 Flange Ball Bearing (2)
R806020 12x18x4 Ball Bearing (4)
R806100 Pin 2.5x11.8 (6)
R806101 Pin 3x19.8 (6)
R807004 Tire Hook Spring (4)
R807016 Front Anti-Roll Bar 2.4mm
R808040 Front Steering Plate Carbon (2)
R818004 R8.1 Front Shock Tower
R823003 Anti-Roll Bar Stopper 2.0-2.4 (2)
R10107A Ball Joint 4.9mm Open (6pcs)
R105101 2x5mm Cap Screw (10)
R105104 3x6 Round Screw (10)
R105105 3x8 Round Screw (10)
R105401 3x3mm Set Screw (10)
R801015 Front Low Arm Set
R801021 Front Low Arm Holder (4)
R801023 Suspension Bracket Insert-Open (8)
R801055 Steering Block
R801072 Front Upper Arm (2)
R801090 Ball End 5.8mm (4)
R801094 C Spacer Set 1mm/2mm/3mm
R802006 Front Upper Arm Bracket
R802032 Front Tire Hook (2)
R802041 Front Shock Mount S (2)
R802086 7.9mm Ball End Long-Alu (4)
R802090 Front Wheel Axle - Alu (2)
R803014 Anti Roll Bar Ball Head (2)
R803015 Anti Roll Bar Screw (2)
R803016 Ball Head 4.9mm (4)
R105105
3x8 Round Screw (10)
R105104
3x6 Round Screw (10)
R805102
4x8 Round Screw (10)
R805103
4x10 Round Screw (10)
R105401
3x3mm Set Screw (10)
RR805307
3x6mm Set Screw (10)
R805010
3x5mm Flat Screw (10)
R105101
2x5mm Cap Screw (10)
R806005
5x10x4mm Flange Ball Bearing (2)
R806101
Ø3x19.8 Pin (6)
R806100
Ø2.5x11.8 Pin (6)
R806020
12x18x4mm Ball Bearing (4)
1817
BAG 03 BAG 03
BAG 03
2
3
3
12
1
1
2
3
3
1
TH
TH
TH
TH
Option Parts (Not Included)
R813005 Dowstop Adjust Screw (4)
R805053
4x10mm Set Screw (10)
MIDDLE Roll Center
LOW Roll Center
DEFAULT SETUP
NOTICE
R823010 R8.2 Rear Solid Axle-Light
The optional lightweight rear solid axle will reduce
5g and improve the efficiency of acceleration.
Option Parts (Not Included)
R803010
R806101
R801113
R805201
R801024
R812035
R801040
R806020
R804031
R806020
R812037
R812037
R805040
R805040
R805201
R105204
R801040
R105204 3x8mm Flat Screw (10)
R801024 Suspension Bracket Insert-Closed (8)
R801113 Pulley Set -Rear
R803010 Rear Solid Axle
R805040 12mm C Clip (6)
R805201 4x8mm Flat Screw (10)
R806101 Pin 3x19.8 (6)
R812035 R8.2 Rear Low Arm Bracket RF
R812037 R8.2 Rear Low Bulkhead
1:1 Scale
R806020
12x18x4mm Ball Bearing (4)
1:1 Scale
R105204
3x8mm Flat Screw (10)
R805201
4x8mm Flat Screw (10)
R806101
Ø3x19.8 Pin (6)
R105104 3x6 Round Screw (10)
R105105 3x8 Round Screw (10)
R805053 4x10mm Set Screw (10)
R811010 R8.2 Rear Low Arm-Long
R812038 R8.2 Rear Low Shock Mount (2)
R105105
R812038
R105104 R105105
R105105
R105104
R811010
R805053
R811010
R805053
R105105
R812038
R801040 Bearing Bushing -Solid Axle (2)
R804031 Rear Belt 201-8
R806020 12x18x4 Ball Bearing (4)
1:1 Scale
R105105
3x8 Round Screw (10)
R105104
3x6 Round Screw (10)
Use reversed direction to install adjust screw
R805040
12mm C Clip (6)
2019
BAG 03
BAG 03
BAG 03
BAG 03
23
1
TH
TH
R10107A Ball Joint 4.9mm Open (6pcs)
R106010 5x8x2.5mm Ball Bearing (4pcs)
R801046 Anti-Roll Bar Bushing -Front (2)
R801090 Ball End 5.8mm (4)
R803013 Anti Roll Bar Stopper (2)
R803014 Anti Roll Bar Ball Head (2)
R803016 Ball Head 4.9mm (4)
R803034 3mm X 15mm Turnbuckle
R817020 R8.1 Rear Anti-Roll Bar 3.0mm
1:1 Scale
R817020
R803014 R803014
R801090
R801090
R803034
R10107A
R803016 R803016
R10107A
R803034
R803013
R106010
R801046
R803037 4mm X 17mm Turnbuckle (2)R801093 Rear Upper Arm Set
R802038 Alu Ball Head 6.8mm (2)
R106010
5x8x2.5mm Ball Bearing (4)
STANDARD
Default
LOW
Roll CenterMore Rear Grip
NOTICE
R805050
R105401
R805050
NOTICE
1:1 Scale
R105401
3x3mm Set Screw (10)
R805050
4x4mm Set Screw (10)
Center the anti roll bar so that the spacing is
equal on both sides.
R105401 3x3mm Set Screw (10) R805050 4x4mm Set Screw (10)
R801093
R801093
R803037
R802038 R802038
R801093
Step 1
15mm
2.8mm 2.8mm
2.0mm Hex
Pre-Assemble
2.0mm Hex
to adjust length
2.0mm Hex
to adjust length
Step 2
R803032
1:1 Scale
R801024
R105105
R812036
R805201
R105105
3x8 Round Screw (10)
R805201
4x8mm Flat Screw (10)
R105105 3x8 Round Screw (10)
R801024 Suspension Bracket Insert-Closed (8)
R803032 Rear Low Arm Pin
R805201 4x8mm Flat Screw (10)
R812036 R8.2 Rear Low Arm Bracket RR
Table of contents
Other ARC Motorized Toy Car manuals
