Table Of Contents
1. Remove the Seat 4
2. Remove the rear Tank Bolts 5
3. Remove the Front Tank Bolts 6
4. Disconnect the Fuel Line 7
5. Tank Removal 8
Special Note: Brake Lines 9
6. Expose the Harness 10
7. Power Harness 11
8. Exposing the Battery 12
9. Connecting the Power Harness 13
Note: Remove the Fuse 14
10. Windshield Removal 15
11. Vent AssemblyRemoval 16
12. Disconnect the Turn Signals 17
13. Remove the Turn Signals 18
14. Remove the Speaker Grill 19
15. Remove the Front Fairing Outer Screws 20
16. Remove the Front Fairing 21
17. Remove the Front Speakers 22
18. Trim the Enclosure Alignment Pins 20
19. Install the New Speakers 21
20. Remove the Headlight 22
21. Remove the Radio 23
22. Prepare the Harness 24
23. Connect the Power Harness 25
24. Connect the Input Plug 26
25. Connect the Speaker Wires 27
26. Connect to the Stock Harness 28
27. Connect to the Stock Harness 29
28. Remote Turn-on P&A Plug 30
29. Amplifier Mounting Plate 31
30.Mounting the Amplifier 33
Note: Install the Fuse 33
31. Mount the Amplifier 34
33. Confirming Fitment & Wiring 36
34. Finishing Up 37
2 Channel Tuning Guide 38
4 Channel Tuning Guide 39
