Aqua APP-C Series User manual

Air Pressure Pump

Internal pail can/rectangular can type

INSTRUCTION

MANUAL

■APP-C Series

Contents

1・・・・・・・・・・・Safety precautions

2・3・4・・・・・・・・Before using the device

5・・・・・・・・・・・Parts description

6・・・・・・・・・・・Usage instruction

7・・・・・・・・・・・Replacing the suction pipe

8・・・・・・・・・・・Warranty and service

SAFETY PRECAUTIONS

・This manual contains safety-related information. Please follow it strictly.

Before using the device, carefully read the manual (misusing the device

may result in accidents).

・Keep the manual in a safe place and refer to it when necessary.

Not following the instructions may result in death or serious

injuries.

Not following the instructions may result in death or serious

injuries.

Not following the instructions may result in human injuries

and material damage.

想定される内容を示します。

BEFORE USING THE DEVICE

★Read and strictly follow instructions on liquid’s use.

Refer to information on liquid you wish to transfer. Read it carefully

and use the liquid properly.

★In case of direct contact with liquid, act immediately.

In case of liquid ingestion, skin contamination etc., immediately

proceed with liquid’s safety procedures and seek medical attention.

)

★It is strictly prohibited to use fire.

When transferring dangerous (inflammable, explosive etc.) liquids

and/or operating the device in hazardous areas, remember to attach

a ground wire to the nozzle and pump’s main body. Do not use fire.

★Do not disassemble or regulate the device.

Doing so permanently invalidates the warranty.

★Do not insert the tip of the hose into the liquid during the delivery.

When the level of liquid in the container runs low, the pump may

suck liquid mixed with air. There is a risk of splashing the liquid in

the delivery container.

★Remember to decompress the tank.

After using the device, close the air valve. Open main body’s P-cock

to restore normal pressure in the tank. Be very careful of the

left-over pressure. It may cause the pump construction to be

unstable. Always make sure the pressure meter shows 0.

★Keep inner pressure at 0.3 MPa or less.

The safety valve reacts to pressure of 0.5 MPa. If the safety valve

opens, immediately stop liquid delivery and cut the air supply. After

that, remember to properly set the regulator (0.3 MPa).

★Use the device in a safe place.

Keep the pump away from children.

★Seek medical attention when necessary.

If you suddenly feel worse when operating the pump, immediately

discontinue the operation and seek medical attention.

★Use protective equipment.

Wear protective equipment according to liquid’s safety instructions.

★Do not upgrade, reassemble or repair the pump.

All repair and service related matters are restricted to authorized

experts.

★Prevent chemical reactions.

When changing the liquid you are going to transfer, remember to

remove the previous liquid and clean the device. Not doing so may

result in dangerous chemical reactions.

★Request technical service whenever required.

When the device stops operating or operates in a strange manner,

immediately turn it off and contact technical service. Do not use

broken equipment, as it may result in accidents.

★Do not cause shock to device’s main body.

It may result in pump’s malfunction, breakdowns and leakage.

★After using the device, remember to release the leftover liquid.

Leftover liquid may cause rusting of the device, eventually leading

to breakdowns.

★Prevent humidity from getting into compressed air.

If you are dealing with a liquid, which should not come in contact

with water, use an air dryer on the compressed air line.

★Hold the hose/nozzle firmly.

During the delivery the liquid may leave the hose with considerable

force (especially when transferring low viscosity liquids).

Remember to hold the hose firmly in your hands.

★Remember to close the air valve.

When you finish using the device, close the air valve.

★Do not overfill the tank.

If you are going to transfer liquid directly from device’s tank,

remember to keep at least 5 cm distance between the top lid and the

liquid level.

★Fix the lid properly.

Remember to cover the tank with the lid carefully and fix it bolts

(use dedicated spanner (19)). Not fixing the lid tightly enough may

result in leakage and material damage.

PARTS DESCRIPTION

①

Safety Frame

⑥

Pressure Meter

②

Air Valve

⑦

Safety Valve

③

Wing Screw

⑧

Lid

④

Air Release Valve

⑨

Tank’s Main Body

⑤

Delivery Valve

⑰

Dedicated Spanner

USAGE

1. Take off the lid, pour the liquid into the can and make sure cans outlet is in the

same position as lid’s outlet. Insert the suction pipe. Regulate its length if

necessary.

2. Cover the tank with a lid. Fix the lid using bolts. Tighten them equally.

3. Set the delivery valve perpendicularly to the hose in order to close it.

4. Set the air valve ②perpendicularly to the hose in order to close it.

5. Close the air release valve ④.

6. Connect compressed air line to the coupler.

7. Opening the air valve ②will let compressed air (1 MPa) into the can. Check if the

pressure meter shows value below 0.3 MPa.

※If the pressure exceeds 0.5 MPa, the safety valve will open. If it does, immediately

stop the delivery. After the pressure comes back to normal set the pressure regulator

properly to a level of 0.3 MPa or below.

8. Opening the delivery valve ⑤begins the delivery.

9. Closing the delivery valve ⑤stops the delivery respectively.

10. After using the device, close the air valve ②to cut off the air supply.

11. Opening the air release valve ④will restore normal pressure inside of the tank.

12. When the pressure meter shows 0, remove the lid.

Leftover pressure may cause the lid to jump off. It may also splash the

leftover liquid. Remember to check the pressure meter first.

1. Detach the delivery valve ⑤and elbow ⑩from the suction pipe.

2. Release nut A ⑪and remove the suction pipe ⑮through the lid.

3. Release the central and closing bolts ⑫⑬. Insert the suction pipe ⑮. Fix the nut

A ⑪to the central bolt ⑫. The inset has an identical height (28 mm).

4. Attach the elbow ⑩and delivery valve ⑤.

CHANGING THE SUCTION PIPE

④

Air release valve

⑤

Delivery valve

⑩

Elbow

⑪

Nut A

⑫

Central Bolt

⑬

Closing Bolt

⑭

Nut B

⑮

Suction Pipe

⑯

Regulation Pipe

WARRANTY AND SERVICE

Thank you for purchasing our product! We look forward to provide you with help, advice

and service, however, please remember that the warranty does not cover all possible

cases, in which such service may be required.

①If the product has been used correctly, yet broke down, it will be repaired for free if

the breakdown has been reported within 12 months from the date of purchase.

Otherwise, the service will not be free. In both cases covering shipment-related costs

is customer’s responsibility.

②Product’s breakdown has been reported within 12 months from the date of purchase,

but:

⚫The product has been misused.

⚫The product has been repaired/serviced, however, not by AQUASYSTEM.

⚫The product has not been stored or maintained properly.

⚫There are no documents/receipts, which would prove the purchase.

⚫The product has been overused and became worn.

In such cases, service is not free.

For inquiries concerning service, please contact:

《Customer Service》

AQUASYSTEM Co., Ltd.

【Technical Service】Tel ＋81 0 749-47-5215

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual