Aqara WXKG11LM User manual
Homekit无线开关说明书V2
尺寸：65*75mm
材质：105g太空梭哑粉
工艺：胶装
料号：3020212
PANTONE COOL GRAY 7C
PANTONE COOL GRAY 2C
PANTONE 299C
Wireless Mini Switch
English
Wireless Mini Switch Quick Start Guide
Product Introduction
Aqara Wireless Mini Switch is a remote control switch
with compact design and low energy consumption. You
can place or stick it almost anywhere. Single press,
double press or long press to control various smart
accessories, such as, Smart Light and Smart Plug.
* A hub is required.
*Aqara Hub is required to enable Aqara Wireless Mini Switch to
work with HomeKit technology. See www.aqara.com for more
details.
* This product is for indoor use only.
Indicator Light
Push Button
Reset Button
Long Press for 3s: Reset
Single Press: Effective Range Test
English
1. Please add the Hub to the app according to the Hub
Quick Start Guide.
Quick Setup
Effective Range Test: Single press the reset button on
the accessory at your desired position. If the Hub makes
voice prompts, it indicates that the accessory can
communicate effectively with the Hub.
2. Please open the app, tap “Home” and then tap “+” in the
top right corner to enter “Add Device (Accessory)” page.
Select “Wireless Mini Switch”, and add it according to
instructions.
*If the connection fails, please move the accessory closer to the
Hub and try again.
* Avoid metal surface to maximize signal strength.
Installation
Option 1: Place it directly in the desired position.
English
Option 2: Remove the protective film, and stick it to the
desired position.
* Keep the surface clean and dry.
Model: WXKG11LM
Dimensions: 45 × 45 × 12 mm (1.77 × 1.77 × 0.47 in.)
Wireless Protocol: Zigbee
Battery: CR2032
Operating Temperature: -10° – +50° C
Operating Humidity: 0 – 95% RH, no condensation
Specifications
English
Online Customer Service: www.aqara.com/support
Email: [email protected]
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling
Road, Liuxian Ave, Taoyuan Residential District, Nanshan
District, Shenzhen, China.
简体中文
Aqara无线开关是一款低功耗的新型遥控开关，外形小巧，
支持单击、双击、长按，可以任意移动放置或者粘贴安装使
用，可灵活控制智能灯、智能插座等设备。
无线开关说明书
产品介绍
*本产品需要配合具备网关功能的设备使用；
*若使本产品兼容于HomeKit，您需要配备Aqara网关，更多详情请
登录：www.aqara.com；
*本产品仅限室内使用。
按键
指示灯
重置键
长按3s：重置入网
按一下：通讯有效距离验证
简体中文
快速设置
1、请依照网关说明书，将网关添加到app。
2、打开app，点击首页右上角的“+”，进入“添加设备
（配件）”页面，选择无线开关，并依照提示进行操作。
有效距离验证：在预选的安装位置，按一下设备重置键，
网关发出提示音，表明设备与网关之间可以有效通讯。
*如添加失败，请将设备移近网关后重试。
安装方法
*为了确保无线通信稳定，请避免安装在金属表面。
方式一：无需粘贴，直接放置在所需位置。
简体中文
产品型号：WXKG11LM
产品尺寸：45×45×12mm (1.77×1.77×0.47in.)
无线连接：Zigbee
电池型号：CR2032
执行标准：Q/QLML004- 2015
工作温度：- 10℃~+50℃
工作湿度：0~95% RH，无冷凝
基本参数
方式二：撕下胶贴保护膜，粘贴在所需位置。
*请确保粘贴位置表面清洁干燥。
Other manuals for WXKG11LM
1
Table of contents
Languages:
Other Aqara Switch manuals
Aqara
Aqara G2H User manual
Aqara
Aqara M1S User manual
Aqara
Aqara H1 User manual
Aqara
Aqara ZHWG11LM User manual
Aqara
Aqara WXKG11LM Installation instructions
Aqara
Aqara Smart Wall Switch (No Neutral) User manual
Aqara
Aqara H1 User manual
Aqara
Aqara H1 EU User manual
Aqara
Aqara WXKG05LM User manual
Aqara
Aqara T1 User manual
