Apollo GoboPro+ LED User manual
Outdoor Prole
Apollo GoboPro+ LED
Introduction
Product Description
Congratulations on the purchase of your Apollo GoboPro+ LED Outdoor Prole.
This xture projects static or rotating gobo patterns with high output and fantastic
optical clarity.
Apollo MFG is proud to be the exclusive USA distributor.
Since 1992, Apollo MFG has been one of the world’s leading innovators, manufactur-
ers and distributors of gobos, color lters, lights and related equipment and accesso-
ries for the lighting industry.
We are continually engineering new products to help you create and execute
the designs of your dreams for theaters, bands, advertising, touring companies,
television, motion pictures, museums, retail and architecture.
Apollo MFG is recognized for creating innovative and award-winning products of
superior quality and value. Focused on you, our goal is to ensure unparalleled support
from the initial conversation to after sales service.
Our lighting experts and engineers will consult with you on ways to use our standard
products or engineer custom solutions. Allow your imagination to run free. Let the
Apollo Design team help you create the lighting design you only imagined.
There is virtually no limit to what we can do together.
Joel Nichols, Owner/CEO
Apollo MFG
1
Apollo MFG 260.497.9191 • ApolloMFG.com
Table 0f Contents
Safety Instructions....................................................................................................................................................2
Installation
Mounting ............................................................................................................................................................................3
Waterproof Barrel.......................................................................................................................................................3
Lens Fitting & Focusing .........................................................................................................................................4
Distance Calculation Formula .........................................................................................................................5
Operation
Gobo & Gobo holder................................................................................................................................................5
Attaching the complete gobo holder to xture.................................................................................5
Removing the complete gobo holder from the xture.............................................................. 6
Inserting a gobo into the gobo holder......................................................................................................6
Removing the gobo from the gobo holder..........................................................................................6
Controlling the image..............................................................................................................................................7
Specications............................................................................................................................................................... 8
Warranty ........................................................................................................................................................................... 9
BOX CONTENTS
1 - Apollo GoboPro+ LED Outdoor Prole xture
1 - User Manual
1 - Allen Wrench
1 - PSU Power Supply
1 - Gobo Cassette
1 - Gobo Remover Tool
2
Apollo MFG 260.497.9191 • ApolloMFG.com
Safety Instructions
1. Read and understand all instructions before using the equipment.
2. Close supervision is necessary when any xture is used by, or near,
children.
3. Care must be taken, as burns can occur from touching hot parts.
4. Do not operate xture with a damaged cord, or if the xture has been
dropped, or damaged, until it has been examined by a qualied engineer.
5. Position the cord so that it will not be tripped over, pulled, or come into
contact with hot surfaces.
6. If an extension cord is necessary, a cord with a current rating at least equal
to that of the xture should be used. Cords rated for less amperage than
the xture may overheat.
7. Always unplug xture from electrical outlet before cleaning and servicing
and when not in use. Never yank cord to pull plug from outlet. Grasp plug
and pull to disconnect.
8. Let xture cool completely before packing. Loop cord loosely around
xture when storing.
9. To reduce risk of electric shock, do not immerse product in water or other
liquids.
10. To reduce the risk of electric shock, do not dismantle this xture.
11. Do not attempt to service the xture unless you are qualied and working
under the direction of the manufacturer.
12. The use of an accessory attachment not recommended by the manufacturer
may cause a risk of re, electric shock, or personal injury.
13. A safety chain or cable must be tted to the xture and secured to an
immovable object where applicable. The securing point must be able to
withstand the shock weight of the xture should it fall.
14. After any maintenance or cleaning all parts must be absolutely dry before
retting to the xture.
15. During focusing of the projected image beware of moving the lens
too far, as this may cause the lens to become separated from the xture,
and perhaps drop and break causing injury.
16. Flammable surfaces should be 2 feet away from the front of the xture.
3
Apollo MFG 260.497.9191 • ApolloMFG.com
Apollo GoboPro+ LED Outdoor Prole is supplied with one u-shaped bracket
that can be mounted to any immovable surface. The mounting bracket opening
is 0.43"(11mm). The angle of the u-shaped bracket can be adjusted using the
pivot handles on the side of the xture. It is recommended that the power cable
is installed at the top of the xture in wet conditions to reduce the risk of water
ingress into the body. If the xture is to be mounted vertically downwards, it is
recommended a small disk is installed above the xture to prevent water pooling
in the back of the unit.
Mounting
Apollo GoboPro+ LED Outdoor Prole is supplied with one 7.87"(200mm)
long IP-rated 65 barrel (suitable for 18°(120mm) lens). To remove the barrel,
gently wiggle the barrel and pull the barrel off. To reattach, gently wiggle and push
the barrel onto the xture. Please note that there will be a different size barrel
available to be accommodate 15°(150mm) lens and larger. There is a .03"(1mm)
opening at the front of the barrel to drain condensation. This opening should be
aligned at the bottom of the xture. To secure the barrel to the xture, afx the
two supplied M4 x 12mm CSK stainless steel screws through the openings in the
mounting bracket.
Waterproof Barrel
4
Apollo MFG 260.497.9191 • ApolloMFG.com
To change the lens, loosen the screw on the bottom of the lens housing and
remove. Insert the new lens to a balanced position and tighten the screw on the
bottom of the lens housing. To project a focused image, it is necessary to nely
adjust the focusing lens after the unit has been pointed at the desired projection
surface. To adjust the focusing lens, loosen the screw on the side of the lens
housing and slide the housing along the rails until the image is focused. Secure
the lens housing to the rails by tightening the screw on the side.
Lens Fitting & Focusing
5
Apollo MFG 260.497.9191 • ApolloMFG.com
Distance Calculation Formula
Apollo GoboPro+ LED Outdoor Prole xtures accommodate an outside diameter
of 50mm (+0 -0.1mm) rotatable gobo, and a 44mm OD (+0 -0.1mm) static gobo
which can be purchased from Apollo directly. A 50mm gobo holder is supplied
with every GoboPro+ into which all gobos need to be inserted for projection.
Engage the gobo holder onto the drive gear at the bottom and gently snap the
gobo holder onto the xture.
Lens Focal Length
Projection Distance to
Image Size(ratio)
Lens
Degree
52°
36°
26°
18°
15°
Gobo & Gobo holder
Attaching the complete gobo to the fixture
6
Apollo MFG 260.497.9191 • ApolloMFG.com
Insert a ngernail or at blade screwdriver into the gap between the gobo holder
and the xture and gently lift out the gobo holder. Additional gobo holders are
available from Apollo.
Line up the gobo with one of the tabs on the gobo holder and gently press the
gobo using your thumbs level with the two other tabs. When the gobo is fully in-
serted, you will hear a click noise. If inserting a 44mm static gobo, turn the gobo
holder over and gently push the gobo into the back of gobo holder. It is recom-
mended that the two image faces of the 44mm and 50mm gobo are placed to-
ward each other. It is recommended to use a separate gobo holder for each gobo.
Removing the complete gobo from the fixture
Inserting a gobo into the gobo holder
Wait until it is cool enough to touch before attempting to remove the gobo from
the gobo holder. It is easier to remove the gobo from the gobo holder if it is
slightly warm. A plastic gobo removal tool has been shipped with the GoboPro+ to
gently lift glass gobos and retaining rings from the gobo holder.
Removing the gobo from the gobo holder
7
Apollo MFG 260.497.9191 • ApolloMFG.com
Controlling the image
The Apollo GoboPro+ LED Outdoor Prole has an internal variable speed
rotator. The 50mm gobos can project static and/or rotating images. To rotate the
image clockwise engage the toggle switch upwards. To rotate the image counter
clockwise, engage the toggle switch downwards. For a static image, make sure the
toggle switch is in the central position. To control the speed of the rotation use
the black adjustment knob. To increase the speed, turn the black knob clockwise.
To slow the speed of the rotation, turn the black knob counter clockwise.
8
Apollo MFG 260.497.9191 • ApolloMFG.com
Specifications
TECHNICAL SPECIFICATIONS
Name Apollo GoboPro+ LED Outdoor Prole
Gobo Projection Static and/or rotating image. Integral rotator for gobo movement
Lens Options 39°(60mm), 26°(85mm), 18°(120mm)
Foot Candles 640
Focus Manual
CRI 78.1
Light Source 120W LED
Lumens 3,520
Brightness 3560 Lux at 1 m Diameter
Color Temperature
(Kelvin) 7750K
Color of Fixture Black Powder Coat (White upon request)
Gobo Size 50mm o/d rotating, 44mm o/d xed. (36 image diameter).
Control Manual
Fixture Rating IP 65 with front barrel installed. Suitable for outdoor use.
Dimension of
projector
13.4"L x 9.8"H x 5.5"W x 3.9" (340mm L x 250mm H x 140mm W x
100mm)
Weight 3.5lbs (1.6kg)
*Lens sold separate
Other manuals for GoboPro+ LED
1
Table of contents
Popular Outdoor Light manuals by other brands
Lindby
Lindby 9949029 Intended use
HEPER
HEPER DOGO Side LW6048.585-US Installation & maintenance instructions
HEPER
HEPER LW8034.003-US Installation & maintenance instructions
Maretti
Maretti VIBE S 14.6080.04.A quick start guide
BEGA
BEGA 84 253 Installation and technical information
HEPER
HEPER MINIMO Installation & maintenance instructions
LIGMAN
LIGMAN BAMBOO 3 installation manual
Maretti
Maretti TUBE CUBE WALL 14.4998.04 quick start guide
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB installation instructions
urban ambiance
urban ambiance UQL1273 installation instructions
TotalPond
TotalPond 52238 instruction manual
Donner & Blitzen
Donner & Blitzen 0-02661479-2 owner's manual