Apex Digital 14139 User manual
INDOOR / OUTDOOR 2.4 GHz
6-AXISDRONE
APEX
AVIATION PRODUCTS
Parts available online at ShopAtShowcase.com
Item # 14139
HEADLESS
MODE
AUTO
HOVER
100 M
RANGE
Thank you for purchasing our Apex Drone. Please read this instruction
manual carefully in order to master the skills necessary to operate this product
safely. Please keep this instruction manual for future reference.
IMPORTANT INSTRUCTIONS
SAFETY NOTICES
CONTENTS
ITEM NO. WHAT’S IN THE BOX
14139
1. This product is a piece of high performance equipment that integrates high tech
mechanics with state of the art electronics. You should operate it in a safe and
controlled environment. Please note that improper use may result may result in
severe injury or loss of property.
2. This product is recommended for ages 14 and up. Children must be supervised by
an adult at all times.
3. Operate the Apex Drone according to the guidelines in the manual.
4. Please operate the Apex Drone in wide open areas, away from people, pets and
obstacles.
5. Please note the manufacturer and distributer are not responsible for any injury,
damage or loss of property resulting from improper use.
This Apex Drone may cause injury. Please ensure to operate the Apex Drone away
from people, animals, vehicles and property. Inspect the Apex Drone for damage prior
to, and after, each use.
1 .Keep it far away from obstacles and people.
2. Do not operate the Apex Drone in wet or moist conditions.
3. Follow all safety instructions and guidelines for use in the manual.
4. Keep the Apex Drone away from heat sources and electrical equipment.
5. Please follow the power on and power down sequences carefully. The incorrect
sequence of actions may cause the Apex Drone to behave unpredictably, resulting in
damage or harm to users.
HOW TO ASSEMBLE AND UNASSEMBLE THE MOBILE PHONE MOUNT
1. Put the back of the mobile phone
mount in position to match the antenna
and handle of the controller.
2. Press the controller into the
mobile phone mount until it clicks
3. Adjust the mount up
or down, according to fit
the size of the mobile phone.
(The width is 8.5cm)
4. After you place your mobile phone
on the mount, open the software and
you can enjoy the real time video
showed on your phone.
UNASSEMBLING THE MOBILE PHONE MOUNT
When you want to take out the
mobile phone mount, you need to pull it
upwards, and away from the remote.
Charging time: About 120mins- Fly time: about 6-8mins
5. When finished charging, reconnect
the battery wire to the power port,
and then close the battery cover.
BATTERY CHARGING - FIRST STEP
1. Push the on/off switch of drone to
OFF position then open the battery
cover.
2. Pull out the battery wire from the
power port inside the drone.
3. Take out the USB charging cable
inside the drone, and connect the
battery power port.
4. Connect the USB charging cable to an
adapter, computer, or other suitable
charging device.
The indicator light will turn OFF while
charging the battery. Once the red light
turns ON, the battery is fully charged.
1.Install batteries with correct polarity.
2.Do not mix old and new batteries.
3.Do not mix different types of batteries.
GET TO KNOW YOUR REMOTE
INTRODUCTION OF TRANSMITTER
Power Light
Left control lever (accelerator
and headless mode)
Left/Right Fine-tuning
Light Control and Low/Medium
/High Speed Switch
Power ON/OFF
360 Flip
Right Control Lever and
Auto-return
Sideward Fine-tuning
Forward/Backward Fine-tuning
INSTALLING THE BATTERY
Battery Cover
4 X AA(LR06)
1.5V Batteries
1.Open the battery cover and
install 4 AA Batteries (not included)
into the back of transmitter
then replace battery cover
and reinstall the screw.
4
①Press the power switch to turn on the remote.
②Press the power switch to turn on the Apex Drone.
HOW TO RESET YOUR DRONE
When the Apex Drone indicator rapidly flashes,
please push the throttle lever to the highest
position, and then pull back to the lowest position.
Then the Apex Drone indicator will change from
flashing to solid lights. The drone is now in a
pre-flight state.
Place the Apex Drone on a horizontal surface.
Push transmitter both left and right to lowest
left corner for about 2-3 seconds.
The indicator on the Apex Drone will change
from solid light to flashing. After 2-3 seconds,
the indicator will change to solid lights. It means
the Apex Drone restarted/reset successfully.
In case of drifting or uneven flight, restore factory default settings by the
following methods:
5
Pull the throttle left or right, the Apex
Drone turns to left or right.
Pull the direction lever left or right, the
Apex Drone flies to left side or right side.
OPERATING DIRECTION
UP AND DOWN
FORWARD AND BACKWARD
TURN LEFT AND RIGHT
SIDEWARD FLY
Push the throttle up or down, the
Apex Drone flies upward or downward.
Push the direction lever up or down, the
Apex Drone flies forward or backward.
In order to adapt for more player skills, our
controller has three different speeds -
Low/Medium/High Speed.
Speed can be changed by pushing down button
5 on the transmitter.
FINE-TUNING ADJUSTMENTS
Forward/Backward fine-tuning
Sideward fly fine-tuning
Tum left/right fine-tuning
When the Apex Drone keeps flying
forward/backward, correct it by
pressing the fine-tuning button
down/up.
When the Apex Drone keeps flying to
left/right side, correct it by pressing
the fine-tuning button right/left.
When the Apex Drone keeps
rotating to left /right, correct it by
pressing the fine-tuning turn
button right/left.
LIGHT CONTROL FUNCTION
HEADLESS MODE FUNCTION
Under normal control mode, controls are relative to the front and back of the unit.
When headless mode is activated, the controls are relative to the remote regardless
of which direction the Apex Drone is facing.
To activate Headless Mode, push down on the left throttle until you hear a click.
Push down on the left stick again to cancel Headless Mode.
When using Headless Mode, no matter which way the Apex Drone is actually facing,
if you throttle forward, the drone will actually move forward as per the original
position set, regardless of which way the Apex Drone currently faces. This makes
the Apex Drone much easier to fly and operate safely.
The LED light on the product can be
controlled by pushing button "5".
Push this button and the light will turn on.
Push this button again, and the light will turn
off.
AUTO RETURN FUNCTION
ALTITUDE CONTROL FUNCTION
When the Apex Drone is at the desired height, push down on the right stick until
you hear a click. This will lock the Apex Drone to the current height.
Push down on the right stick again to cancel the altitude control function.
See headless mode figure for correct method.
When using Altitude Control, the Apex Drone will stay at approximately the
same height, regardless of other input. This can make the Apex Drone much
easier to fly and operate safely.
When you want the Apex Drone to auto-return,
ensure the Apext Drone is in front of you.
Press in the right control lever and it will return in
the general direction of the remote. This function
can commence operation at any time.
Table of contents
