Apera Instruments SX620 User manual

SX620 pH Pen Tester Instruction Manual

1. Brief Introduction

Thank you for purchasing APERA INSTRUMENTS SX620 pH Pen Tester. This product is featured with

reliable and accurate measuring performance with a single-button operation in a slim body. Ideal for

measuring pH in regular water solutions, including hydroponics, aquaculture, water treatment, pools& spas,

cooling towers, beverage making, body fluid (e.g. urine, saliva). The pH probe is replaceable and suitable

for test tube measuring and other small-volume sample testing.

2. Specifications

1) Measuring Range: -1 to 15.00 pH; Temperature: 0 to 60°C

2) Resolution: 0.01 pH; Temperature: 0.1°C

3) Accuracy: ± 0.01 pH, ±1 digit; Temperature: ± 0.5°C

4) Automatic calibration: 1-3 point calibration (pH 7.00, pH4.00, pH10.01)

5) Power: 2 x CR2032 Cell Batteries

6) Dimension and Weight: 148*29*14mm / 43g

7) Waterproof rating: IP57

3. Instructions

1) Calibration: Rinse the probe in distilled water and dap off excess water with tissue paper. Dip the probe

in the standard buffer solution pH7.00. Stir gently, hold still, and wait for the reading to become stable.

Then press the CAL button for about two seconds until CAL appears on the screen. When the

calibration value 7.0 flashes, the calibration will finish after several seconds, and the meter will return to

measurement mode and the icon will appear on the screen.

2) Rinse the probe in distilled water and dap off excess water with tissue paper. Dip the probe in the other

standard buffer solution (pH4.00 or pH10.01) to complete calibration according to the steps in 1). Icon

will appear when pH 4.00 is calibrated, and icon will appear when pH 10.01 is calibrated.

3) Measurement: Rinse the probe in distilled water and dry it. Dip the probe in the sample solution. Stir gently

and wait until you receive a stable reading.

4) After measurement, rinse the probe with distilled water, dry it, and put the protection cap back on. It’s a

good practice to pour a bit storage solution that comes with kit into the protection cap when storing the

meter, since it will help keep the accuracy of the pH probe.

5) Temperature Unit Switch: When meter is turned off, hold the CAL button until the meter reboots and then

the temperature unit will be switched (˚C–˚F)

4. Notes

1) The tester should be calibrated at least once in a week. Calibrate one point with pH 7.00 buffer solution

for tests requiring general accuracy (>=0.1pH). Calibrate two points with pH 7.00 and pH 4.00 buffer

solutions for tests of acidic solutions (measurement value is less than pH7.00). Calibrate two points with

pH7.00 and pH 10.01 buffer solutions for tests of alkaline solutions (measurement value is more than pH

7.00). If the measurement range is broad, calibrate three points with pH 7.00, pH 4.00 and pH 10.01. To

ensure the reliability of calibration, pH standard buffer solutions should be replaced after 10-15 times of

calibration.

2) Maintenance is necessary for the head of the probe because it can become contaminated after long-term

use. To perform the maintenance, rinse the probe head in soap water and clean it with a soft brush. Then

Rinse the bulb with distilled water, and perform calibration again after several hours.

3) The typical service life of the pH electrode is about 12-18 months. When the icon “Err” appears on the

screen, or the accuracy or response speed cannot meet your demand, please replace a new probe. The

replacement probe’s model number is SX625. Please go to support.aperainst.com to watch a tutorial video

for how to replace the pH probe.

4) The instrument will turn off automatically after 10 minutes if no operation.

5) Replace the batteries when appears on screen.

5. Warranty

We warrant this instrument to be free from defects in material and workmanship and agrees to repair or

replace free of charge, at option of APERA INSTRUMENTS (Europe) GmbH, any malfunctioned or

damaged product attributable to responsibility of APERA INSTRUMENTS (Europe) GmbH for a period of

two years from the delivery (a six-month limited warranty applies to electrodes). Warranty period is the

time limit to provide free service for the products purchased by customers, not the service life of the tester

or electrodes.

APERA INSTRUMENTS (Europe) GmbH

Wilhelm-Muthmann-Straße 15

42329 Wuppertal, Germany

Contact: info@aperainst.de

Website: www.aperainst.de

Tel. +49 202 51988998

Table of contents

Other Apera Instruments Test Equipment manuals

Apera Instruments

Apera Instruments PH60S User manual

Apera Instruments

Apera Instruments LabSen 841 User manual

Apera Instruments

Apera Instruments 60-Z Series User manual

Apera Instruments

Apera Instruments ZenTest PH60S-Z User manual

Apera Instruments

Apera Instruments ZenTest PH60-Z User manual

Apera Instruments

Apera Instruments LabSen763 User manual

Apera Instruments

Apera Instruments PC60 User manual

Apera Instruments

Apera Instruments ORP60 User manual

Apera Instruments

Apera Instruments LabSen 753 User manual

Apera Instruments

Apera Instruments GroStar GS3 Premium User manual

Apera Instruments

Apera Instruments Premium Series User manual

Apera Instruments

Apera Instruments EC20 User manual

Apera Instruments

Apera Instruments Premium Series User manual

Apera Instruments

Apera Instruments PH60 User manual

Apera Instruments

Apera Instruments LabSen 553 User manual

Apera Instruments

Apera Instruments LabSen 213 Routine User manual

Apera Instruments

Apera Instruments PH60F-Z User manual

Apera Instruments

Apera Instruments COND5 User manual

Apera Instruments

Apera Instruments LabSen 231 User manual

Apera Instruments

Apera Instruments Salt20 User manual

Apera Instruments

Apera Instruments ZenTest PC60-Z User manual

Apera Instruments

Apera Instruments PH20 User manual

Apera Instruments

Apera Instruments GroStar GS4 User manual

Apera Instruments

Apera Instruments GroStar GS1 User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual