Anthem STR User manual

STR INTEGRATED AMPLIFIER
Operating Manual

i
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF UNINSULATED
“DANGEROUS VOLTAGE” WITHIN THE
PRODUCT’S ENCLOSURE THAT MAY BE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A
RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN
AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING
AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including ampliers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided
plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the
point where they exit from the apparatus.
11. Only use the attachments/accessories specied by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket or table
specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF
FIRE, REPLACE THE FUSE ONLY WITH THE SAME AMPERAGE
AND VOLTAGE TYPE. REFER REPLACEMENT TO QUALIFIED
SERVICE PERSONNEL.
WARNING: UNIT MAY BECOME HOT. ALWAYS PROVIDE
ADEQUATE VENTILATION TO ALLOW FOR COOLING. DO
NOT PLACE NEAR A HEAT SOURCE, OR IN SPACES THAT
CAN RESTRICT VENTILATION.
IMPORTANT SAFETY INSTRUCTIONS

ii
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. Avoid
installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
• Burning objects (i.e. candles), as they may cause re, damage to this unit, and/or personal injury.
• Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or
damage to this unit.
Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be
placed on the apparatus.
Do not install this equipment in a conned space such as a case or similar. Install it away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause re, damage to this unit, and/or personal injury.
Install this unit near the AC outlet and where the AC power plug can be reached easily.
This unit is not disconnected from the AC power source when it is turned o. This state is called the standby mode.
In this state, this unit is designed to consume a very small quantity of power.
NOTE: This product is not an auto voltage Amplier. Connect only to the prescribed AC outlet, i.e., 120V 60Hz or 240V
50/60Hz.
CAUTION: Top surface can become hot.
CAUTION: These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualied
to do so.
CAUTION: Changes or modications to this equipment not expressly approved by Paradigm Electronics for
compliance could void the user’s authority to operate this equipment.
FCC WARNING: Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and amplier.
• Connect the equipment into an outlet on a circuit dierent from that to which the amplier is connected.
• Consult the dealer or an experienced radio / TV technician for help.

iii
IMPORTANT INFORMATION FOR UK CUSTOMERS: DO NOT cut o the mains plug from this equipment. If the plug
tted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or consult your dealer. If, nonetheless, the mains plug is cut o, REMOVE THE
FUSE and dispose of the PLUG immediately, to avoid possible shock hazard by inadvertent connection to the mains supply.
If this product is not provided with a mains plug, or one has to be tted, then follow the instructions given below:
IMPORTANT: DO NOT make any connection to the larger terminal which is marked with the letter “E” or by the safety
earth symbol or colored GREEN or GREEN AND YELLOW.
The wires in the mains lead on this product are colored in accordance with the following code:
BLUE – NEUTRAL
BROWN – LIVE
As these colors may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:
The BLUE wire must be connected to the terminal marked with the letter “N” or colored BLACK.
The BROWN wire must be connected to the terminal marked with the letter “L” or colored RED.
When replacing the fuse, only a correctly rated and approved type should be used, and be sure to re-t the fuse cover. If in
doubt consult a competent electrician.

iv
CdHgPb
NOTES ON ENVIRONMENTAL PROTECTION
At the end of its useful life, this product must not be disposed of with regular household waste but must be returned to
a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s manual and
packaging, point this out. The materials can be reused in accordance with their markings. Through re-use, recycling of
raw materials or other forms of recycling of old products, you are making an important contribution to the protection of
our environment. Your local administrative oce can advise you of the responsible waste disposal point.
RECYCLING AND REUSE GUIDELINES (Europe)
In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive eective August 13,
2005, we would like to notify you that this product may contain regulated materials which, upon disposal, require special
reuse and recycling processing. For this reason Paradigm Electronics Inc. (the manufacturer of Paradigm speakers and
Anthem electronic products) has arranged with its distributors in European Union member nations to collect and recycle
this product at no cost to you. To nd your local distributor please contact the dealer from whom you purchased this
product or go to our website at www.paradigm.com.
Please note that only the product falls under the WEEE directive. When disposing of packaging and other shipping
material we encourage you to recycle through the normal channels.
INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES (DIRECTIVE 2006/66/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL OF EUROPEAN UNION) (for European customers only)
Batteries bearing any of these symbols indicate that they should be treated as “separate collection” and not as municipal
waste. It is encouraged that necessary measures are implemented to maximize the separate collection of waste
batteries and to minimize the disposal of batteries as mixed municipal waste. End-users are exhorted not to dispose
waste batteries as unsorted municipal waste. In order to achieve a high level of recycling waste batteries, discard waste
batteries separately and properly through an accessible collection point in your vicinity. For more information about
collection and recycling of waste batteries, please contact your local municipality, your waste disposal service or the point
of sale where you purchased the items.
By ensuring compliance and conformance to proper disposal of waste batteries, potential hazardous eects on human
health is prevented and the negative impact of batteries and waste batteries on the environment is minimized, thus
contributing to the protection, preservation and quality improvement of the environment.
Anthem and any related party assume no liability for the user’s failure to comply with any requirements.
Anthem, AnthemLogic, ARC, Sonic Frontiers, and Paradigm are trademarks or registered trademarks of Paradigm
Electronics Inc. © Paradigm Electronics Inc. All rights reserved. The information contained herein may not be reproduced
in whole or in part without our express written permission. We reserve the right to change specications or features
without notice as design improvements are incorporated.
All other trademarks are the property of their respective owners.

v
TABLE OF CONTENTS
INTRODUCTION
1.1 Before Making Connections . . . . . . . . . . . . . 1
1.2 In-Use Notices . . . . . . . . . . . . . . . . . . . . . 1
1.3 Front Panel. . . . . . . . . . . . . . . . . . . . . . . 2
1.4 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 3
1.5 Remote Control . . . . . . . . . . . . . . . . . . . . 4
CONNECTIONS AND OPERATION
2.1 Speaker Connections . . . . . . . . . . . . . . . . . 5
2.2 Speaker Connections . . . . . . . . . . . . . . . . . 5
2.3 Analog Connections . . . . . . . . . . . . . . . . . . 5
2.4 Local Area Network . . . . . . . . . . . . . . . . . . 5
2.5 12 Volt Trigger . . . . . . . . . . . . . . . . . . . . . 5
2.6 Infra Red . . . . . . . . . . . . . . . . . . . . . . . . 5
2.7 Power . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SETUP
3.1 Speaker setup . . . . . . . . . . . . . . . . . . . . . 7
3.2 Bass Management . . . . . . . . . . . . . . . . . . 8
3.3 Listener Position . . . . . . . . . . . . . . . . . . . 9
3.4 Level Calibration . . . . . . . . . . . . . . . . . . . 10
3.5 Input Setup . . . . . . . . . . . . . . . . . . . . . . 11
3.6 Analog Input Levels . . . . . . . . . . . . . . . . . 13
3.7 Preferences / Line Output . . . . . . . . . . . . . 13
3.8 Network / Remote Control . . . . . . . . . . . . . 14
3.9 General Conguration . . . . . . . . . . . . . . . 15
3.10 Save/load Settings . . . . . . . . . . . . . . . . . 15
3.11 System Information . . . . . . . . . . . . . . . . 16
3.12 USB Audio . . . . . . . . . . . . . . . . . . . . . 17
ANTHEM ROOM CORRECTION (ARC™)
4.1 Before Starting . . . . . . . . . . . . . . . . . . . . 20
4.2 ARC Software Installation . . . . . . . . . . . . . 20
4.3 Microphone Stand Assembly . . . . . . . . . . . . 21
4.4 microphone Positioning. . . . . . . . . . . . . . . 21
4.5 Measurement . . . . . . . . . . . . . . . . . . . . 22
4.6 Manual Mode and Targets . . . . . . . . . . . . . 23
4.7 Advanced Subwoofer Targets . . . . . . . . . . . 26
4.8 Printing a Report. . . . . . . . . . . . . . . . . . . 26
OPERATION
5.1 Power on/ O and Volume . . . . . . . . . . . . . 27
5.2 Input Selection . . . . . . . . . . . . . . . . . . . 27
5.3 Levels . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.4 Listening Modes . . . . . . . . . . . . . . . . . . . 28
5.5 Info Display . . . . . . . . . . . . . . . . . . . . . 28
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . 33
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
TABLE OF CONTENTS

1
Thank you for purchasing the Anthem STR Integrated Amplier
All Anthem products are engineered to recreate the passion of a live musical performance and emotional involvement
experienced in the best movie theaters by utilizing the highest level of circuit design, superior parts and manufacturing
techniques, innovative features, and intuitive ergonomics. We are condent that their inclusion in your system will
signicantly enhance your enjoyment of recordings for years to come.
1.1 BEFORE MAKING CONNECTIONS
Check that you have received all items listed below and report discrepancies to your dealer as soon as possible. In case
the unit needs to be transported in the future, keep the packing materials.
Retain the invoice that you received from your authorized Anthem dealer at time of purchase – without it,
service will not be provided under warranty.
Packing List:
• Integrated Amplier
• Operating manual
• Remote control
• 2 AAA batteries
• USB type B cable for the USB audio input
• USB mini B cable for software updates and ARC (PC version)
• Dual-jack microphone
• 3.5mm microphone cable for ARC (mobile app version)
• IEC power cord (US / UK / EU / CN types are supplied by the factory, other types are normally provided
by the local distributor)
Additional items in Anthem Room Correction (ARC™) kit:
• USB Microphone
• Microphone clip
• Telescopic stand with boom
• USB mini B cable for the microphone
• CAT5 cable for connection to a router or network
1.2 IN-USE NOTICES
• Disconnect the power cord before connecting or disconnecting any components.
• If the amplier was transported or stored in the cold, let it reach room temperature before use.
• Do not remove the top cover.
• Do not modify the product.
• Due to continuing advances, operational characteristics may change. If this manual contains discrepancies
please check www.anthemAV.com for the latest manual.
INTRODUCTION

2
1.3 FRONT PANEL
Display
Setup menu access and selection conrmation
Previous input or item
Volume control and menu navigation
Next input or item
Mute
Power
1
2
3
5
4
6
7
1
2 3
4
5 6 7

3
1.4 REAR PANEL
Power cord inlet (IEC C18 type)
Fuse
Speaker terminals
USB DAC input (Windows PCs need to have XMOS driver installed)
AES/EBU digital audio input
Coaxial digital audio inputs (2)
Optical digital audio inputs (2)
Factory Use Only
Software installation and ARC via PC
Ethernet connection for Anthem Room Correction, software installation and control
RS-232 (serial) connection for control
12V DC / 50 mA trigger output
IR input
Phono ground terminal
Moving coil phono input
Moving magnet phono input
Analog RCA inputs (4)
Balanced XLR input
Line outputs (xed-level, suitable for a headphone amp or recording device)
Subwoofer outputs (2, mono or stereo operation)
Left/Right preamplier outputs (variable-level)
1
1
2
13
2
3
5
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3 3
45 6 7
8
12
1415161718192021
910 11

4
1.5 REMOTE CONTROL
Power – On
Setup menu
Power – Standby
Navigation
Input
Info (pertaining to input and output)
Listening Modes (mono/stereo)
Levels (sub, bass, treble, balance)
Mute
Volume
1
2
3
5
4
6
7
8
9
10
6
11
1 2 3
4
5
7
8
9
10
Other manuals for STR
2
Table of contents
Other Anthem Amplifier manuals

Anthem
Anthem PVA 7 Manual

Anthem
Anthem MCA SERIES User manual

Anthem
Anthem TLP 1 User manual

Anthem
Anthem PVA 2 User manual

Anthem
Anthem MCA 20, MCA 30, MCA 50 User manual

Anthem
Anthem Integrated 2 User manual

Anthem
Anthem AVM 20 User manual

Anthem
Anthem Integrated 1 User manual

Anthem
Anthem MCA 525 User manual

Anthem
Anthem PVA 7 User manual

Anthem
Anthem Amp 1 User manual

Anthem
Anthem AVM 20 User manual

Anthem
Anthem I225 User manual

Anthem
Anthem STATEMENT A2 Owner's manual

Anthem
Anthem Statement P2 User manual

Anthem
Anthem Amp 2 User manual

Anthem
Anthem Line 1 User manual

Anthem
Anthem Statement P2 User manual

Anthem
Anthem MCA 50 User manual

Anthem
Anthem TLP 1 User manual





















