Anova P101 Instruction Manual
4T sprayer truck
Instructions and user manual
P101
Millasur SL
Rúa Eduardo Pondal, nº 23 - Pol. Ind. Sigüeiro
15688 - Oroso - A Coruña - 981 696 465 - www.millasur.com
EN
IT IS
2
Anova wishes to congratulate you for choosing one of our products and
guarantees the assistance and cooperation that has always distinguished
our brand over time.
This machine is designed to last for many years and to be of great use if
used in accordance with the instructions contained in the user manual. We
therefore recommend that you read this instruction manual carefully and
follow all our recommendations.
For more information or doubts, you can contact us through our web
supports such as www.anova.es
INFORMATION ABOUT THIS MANUAL
Please pay attention to the information provided in this manual and on the
appliance for your safety and that of others.
- This manual contains instructions for use and maintenance.
- Take this manual with you when you go to work with the machine.
- The contents are correct at the time of printing.
- The rights to make changes at any time are reserved without
affecting our legal responsibilities.
- This manual is considered an integral part of the product and must
remain with it in case of loan or resale.
- Ask your dealer for a new manual in case of loss or damage.
READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE
To ensure that your machine provides the best results, please
read the usage and safety regulations carefully before using it.
OTHER WARNINGS:
Incorrect use could cause damage to the machine or other objects.
The adaptation of the machine to new technical requirements could cause
differences between the content of this manual and the purchased
product.
Read and follow all instructions in this manual. Failure to follow these
instructions could result in serious personal injury.
IT IS
3
INDEX
1. USER WARNINGS
2. TECHNICAL SPECIFICATIONS
3. INSTRUCTIONS FOR USE OF THE ENGINE
3.1. Security warnings
3.2. Identification of engine parts
3.3. Engine use
3.4. Pre-Operation Checks
3.5. Engine start
3.6. Engine stop
3.7. Engine maintenance
3.8. Engine storage
3.9. Problem solving
3.10. Engine technical data
3.11. Wiring diagram
4. INSTRUCTIONS FOR USE OF THE P100-187 PUMP
4.1. Security warnings
4.2. Expected use
4.3. Unintended uses
4.4. Preliminary checks
4.5. Controls in the installation
4.6. Installation, commissioning and shutdown
4.7. Pump maintenance
4.8. Troubleshooting the pump
5. MAINTENANCE AND STORAGE
6. WARRANTY
7. ENVIRONMENT
8. EXPLODED
IT IS
4
1. USER WARNINGS
Warning
Read carefully the recommendations included in this instruction manual that comes with your
equipment.
During the entire spraying process (product mixing, application, cleaning, etc.) protect yourself
with the following personal protective equipment: gloves, helmet, respirator, safety glasses and
adequate clothing that prevents contact with the product.
respiratory protection
vision protection
face protection
hand protection
Body protection with adequate PPE
Danger due to inhalation of toxic vapors
Danger of burns (indication of hot parts)
corrosive materials
General danger, read instructions
Danger of projection of pressurized fluid, keep a safe distance.
IT IS
5
1.1. Operation safety warnings
- Always make sure, before using the machine, that there are no people or animals in
the work area.
- Keep hands and feet at a safe distance from moving and/or rotating parts.
- Especially in areas with low temperatures, to prevent the pump from being damaged
when trying to start it with the pipes blocked by ice, let the pump work until no water
comes out to empty it completely.
- Never touch any part of the pump if it has not cooled down, there is a risk of burns.
- Wash and change your clothes after every job.
- Wash used tools susceptible to contamination.
- Do not eat, drink or smoke during spray work.
- Do not work in rain or wind.
- When filling tanks with chemical products, have clean water nearby for later washing
of the face and hands. In any case, avoid direct skin contact with these devices.
- In case of poisoning go to the doctor, provide the label of the product that caused it.
- Carefully read the information on the product to be applied and its consequences in
case of poisoning or contact with the body.
- Control possible unwanted reactions between different pesticides stored, next to each
other or mixed.
- Keep the products in their original packaging with their labels, in a dry and ventilated
place, away from the manipulation of children or inexperienced people. After use,
destroy the containers according to the manufacturer's instructions.
- If a product spill accidentally occurs, apply the safety measures on the spilled product
according to the manufacturer's instructions.
- It should not enter the treated field until a reasonable time has elapsed since its
application.
1.2. Additional security warnings
- Be sure to cover the spray tank well once it is full.
- The tank will always be filled in ventilated places, leaving part of the tank capacity
unfilled.
- Never use the tank of the equipment to transport drinking water or fuel.
- After using the equipment, you must wash it with plenty of clean water and run the
pump with the keys open in order to keep it clean of products that may be corrosive.
These types of operations must be carried out in places prepared for this purpose,
where there is no risk of contamination for people, animals or plants.
- Do not clean the nozzles by blowing.
- Before your overhaul, take the pressure off the machine.
- Never check the machine when it is running.
- After your review, install the security covers again.
- Before carrying out any revision, maintenance or action that is not completely safe,
contact your official distributor.
IT IS
6
2. TECHNICAL SPECIFICATIONS
P101/P102
Engine
Anova 4 stroke – MA81
Displacement
79cc
Deposit
100L
Bomb
Anova P100-187
Flow
23L/min
Pressure
25 bar
Long hose
10m
3. INSTRUCTIONS FOR USE OF THE ENGINE
3.1. Security warnings
3.1.1. User Responsibility
Please read and follow the instructions carefully before using the motor, otherwise it will result
in personal injury or damage to the motor.
Learn how to quickly stop the engine and familiarize yourself with all control operations. Never
work with the engine unattended. Keep children and pets away from the area of use.
3.1.2. Carefully refuel
Gasoline is flammable. Carry out the operation in an outside, well-ventilated area, stop the
engine completely and refuel.
Do not smoke during refueling, keep away from fire and other sources of sparks.
It is forbidden to start the engine when there are gasoline splashes in the work area and they
are not completely dry.
3.1.3. Hot exhaust gas
The exhaust will be very hot during engine operation, even after a period of inactivity.
Be careful not to touch the hot exhaust so as not to cause burns. Shut off the engine and let it
cool down.
To prevent fire, keep the motor at least 1 meter away from walls and other equipment while
the motor is running.
Flammable products must be kept away from the engine.
3.1.4. Carbon monoxide poisoning
Exhaust gases produce toxic carbon monoxide. Inhalation of exhaust fumes should be
avoided.
IT IS
7
Do not use in closed places without proper ventilation. Do not run the engine in a closed garage
or enclosed area.
3.2. Identification of engine parts
3.3. Engine use
3.3.1. Engine switch
The engine switch is for turning the ignition circuit on and off: The engine can only be operated
when the engine switch is in the "open" (ON) position; it can be moved to the "OFF" position
to stop the motor.
Gas exhaust
Spark plug
OHV rocker cover
Fuel tank cap
Fuel tank
Starter puller
Throttle adjustment
Air filter
Throttle lever
Engine switch
oil plug
Drain screw for oil
IT IS
8
3.3.2. Throttle control (choke)
The purpose of the choke lever is to open the throttle control and close the choke.
The choke handle must be placed in the "closed" position when the engine is started.
After starting the engine, the choke must be placed in the "open" position.
3.3.3. Starter handle
Pulling the starter handle causes the system to drive the engine crankshaft to start the engine.
Warning
Do not let the starter handle jump back after starting, gently return the pull handle to its original
position.
OFF
Engine switch
ON
Throttle lever
Closed
Open
Starter puller
IT IS
9
3.3.4. Speed control handle
Adjust the position of the speed control lever to achieve the desired engine speed.
3.4. Pre-Operation Checks
3.4.1. Routine inspection
- Check for possible oil and gasoline leaks.
- Check for signs of damage or deterioration in any of the engine parts.
- Check all parts of the covers, tighten the screws, nuts and cables.
3.4.2. Oil level
After stopping the engine, place it in a horizontal position and check the oil:
1. Remove the oil gauge from the oil plug and clean it.
2. Reinsert the oil gauge and check the oil level without tightening the plug or gauge.
3. If the oil level is too low, add the recommended oil to the upper limit.
4. After adding the oil, remember to install and tighten the oil plug properly.
When the oil level is lower than the safety line, the oil protection system will automatically stop
it. To avoid unexpected downtime, check the oil level before every start.
3.4.3. Fuel level
First turn off the engine completely, then unscrew the fuel tank cap and check the fuel level. If
the fuel level is too low, fill the fuel tank. After adding fuel, tighten the fuel tank cap.
throttle lever
Oil plug/gap
Oil upper limit
Lower oil limit
IT IS
10
Warning
When filling the fuel, the level must not exceed the top of the fuel
filter (highest fuel).
Fuel Tank Capacity: 1.6L
It is recommended to use unleaded gasoline with an octane
number greater than or equal to 92#. Unleaded gasoline can
reduce carbon deposits and extend the life of the exhaust
system.
It is strictly forbidden to use rancid or contaminated or mixed
organic oil. Prevent dust or water from entering the fuel tank.
3.4.4. Air Filter Check
Remove the air filter housing and check the filter element. Clean the filter element when it is
dirty. If it is damaged, replace it with a new one.
3.5. Engine start
1) When starting the cold starter, put the choke lever in the "off" position. When the heat
engine is started, the choke handle must be placed in the "open" position.
2) Move the speed control lever from "low speed" to "high speed", about 1/3 of "high
speed".
maximum fuel limit
Nut M6
Screw
Air filter cover
Air filter
Filter cover
support
Closed
Control
Open
Filter seat
This manual suits for next models
1
Table of contents
Popular Paint Sprayer manuals by other brands
Bonide
Bonide 051 Operation and service instructions
zogics
zogics Z-DAS instruction manual
KISANKRAFT
KISANKRAFT KK-KBS-165 Operation manual
Matrix
Matrix SG 650 Translation of the original instructions
Anest Iwata
Anest Iwata SGA-3 Installation, use & maintenance instruction manual
paasche
paasche VV Instructions and parts list
