Anker AK-68ANDOCKS-BA User manual
Anker USB 3.0 Docking Station
Instruction
Manual
This manual provides a beginner's introduction to installing, configuring, and using
the USB 3.0 Display Dock. Information in this document has been carefully
checked for accuracy. No guarantee can be given, however, to the correctness of
its contents. The information in this document is subject to change without notice.
The manufacturer makes no representations of warranty, either expressed or
implied, with respect to the contents hereof, and specifically disclaims any
warranties, merchantability, or fitness for particular purpose.
Always read the safety instructions carefully:
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
If any of the following situations arise, take the equipment to a service technician
for inspection:
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this publication or the documentation accompanying this
product may be reproduced in any form or by any means, or used to make any
derivatives such as translations, transformations, or adaptations without
permission of the manufacturer.
The equipment has been exposed to moisture.
The equipment has been dropped or damaged.
The equipment has obvious sign of breakage.
The equipment has not been working well, or you cannot get it to work
according to the User’s Manual.
ABOUT THIS MANUAL
SAFETY INSTRUCTIONS
COPYRIGHT
All trademarks and registered trademarks are the property of their respective
owners or companies.
TRADEMARKS
1. Introduction
Application
Features
Package Contents
System Requirements
Front Panel
Rear Panel
2. Installation
Driver Installation
Hardware Installation
Verifying the Installation
3. Using the USB Display Dock
Configuring Displays
Controlling the Display
4. Uninstalling the Driver
Uninstalling the Driver
6. Regulatory Compliance
FCC Statement
CE
WEEE Information
5. Specifications
Table of Contents
1
5
8
1
2
2
3
3
4
5
6
7
8
8
12
13
15
12
15
15
15
The USB 3.0 Dual Display Docking StationDock enables multiple USB devices to
be connected to the computer using a single USB 3.0 cable. Now, with one simple
cable connection to your computer, you can have access to large screen displays,
stereo speakers, external hard drives, optical disk drives, printers, USB keyboards
and mice.
Any laptop computer can connect to the USB 3.0 Dual Display Docking Station.
You will no longer need to replace a Display Dock every time you buy a new
computer. All Windows -based computers with USB 3.0 or USB 2.0 ports are
compatible.
Just plug the USB 3.0 cable from the USB 3.0 Dual Display Docking StationDock
into any USB 3.0 or USB 2.0 port on your laptop, and your displays and accesso-
ries will be activated in seconds. To undock, simply unplug the cable and go.
1. Introduction
Application
- 1 -
USB 3.0 peripherals
DVI / HDMI monitors
Ethernet device
USB 2.0 peripherals
USB 3.0 port
Power connection
Earphone & microphone
USB Downstream
Compatible with USB 3.0 and USB 2.0.
Two USB 3.0 downstream ports support Superspeed, high-speed, and
full-speed traffic.
Four USB 2.0 downstream ports support high-speed, full-speed and low-speed
traffic.
Supports USB Battery Charging Specification v1.2 (SDP, CDP, DCP) on 1 USB
3.0 downstream port.
Features
Package Contents
- 2 -
Ethernet
IEEE 802.3, 802.3u, and 802.3ab compatible.
Supports IPv4/IPv6.
Supports full duplex operation with IEEE 802.3x flow control.
Video
Dual digital video outputs.
Extended Desktop (default), Mirrored Desktop, Primary Display.
Supports High Resolution up to 2048 x 1152.
Audio
2 CH Stereo output & Mic-in with combo jack.
Before installation, please check the items inside the package. The package
should contain the following items:
USB 3.0 Display Dock
Removable stand
Power adapter
USB 3.0 cable
Driver CD with user’s manual
Quick installation guide
x1
x1
x1
x1
x1
x1
One available USB port.
One of the following operating systems:
Windows XP, Windows 7, Windows 8.
System Requirements
Front Panel
- 3 -
Power LED:
Glows when the docking station is
powered.
3.5mm stereo audio output port:
For connection to stereo headphones
or speakers.
USB 3.0 downstream port:
For connection to USB peripherals.
USB 3.0 downstream & charging
port:
For connection to USB peripherals or
connection to and charging of mobile
devices.
Rear Panel
- 4 -
4 USB 2.0 downstream ports
(A-type female connectors):
For connection to USB peripherals.
10/100/1000Mbps Ethernet port:
For connection to Ethernet networks
via a network cable.
HDMI video output port:
For connection to an HDMI monitor.
DVI video output port:
For connection to a DVI monitor.
USB 3.0 upstream port:
For connection to a USB 3.0 port on the
host computer.
Power jack:
For connection to the power adapter.
The Docking Station requires an
external power supply for operation.
Security lock slot:
Industry-standard Kensington® security
slot.
Driver installation
2. Installation
- 5 -
Caution: DO NOT connect the USB display dock to your computer before you
install the driver.
Follow the procedures below to install the driver and then connect the USB display
dock to your computer:
Insert the Driver CD into your disc drive. Please locate and double-click on the
setup.exe file under x:\Driver\ where x is the letter of your disc drive.
Note:
You will encounter a User Account Control dialog box when attempting to install
the program. Please click Yes to start the installation.
1.
- 6 -
Please wait while Windows configures the DisplayLink Core Software. Your
screen may temporarily go black or flash during this process.
2.
When finished, the installation screen will disappear, and you will be returned to
your desktop.
Note:
On some machines, you may need to reboot before being able to use your
display dock.
3.
Connect the USB display dock:
Plug the USB 3.0 cable into the USB upstream connector on the back of the
display dock. A pop-up message will appear in the notification area of your
desktop indicating the completion of installation.
* Actual images will depend on your operating system. These screen shots are from Windows 7
and may vary slightly across operating systems.
1.
Connecting an Ethernet network device:
Connect an Ethernet cable to the Ethernet port on the Display dock.
Connect the other end of the Ethernet cable to your network hub, switch, or
router.
For DVI ports: Use a DVI cable (not provided) to connect the DVI port to a
monitor equipped with a DVI input jack.
For HDMI ports: Use an HDMI cable (not provided) to connect the HDMI
port to a monitor equipped with an HDMI input jack.
2.
Connecting a DVI/HDMI monitor:
3.
a.
b.
Hardware installation
- 7 -
Connecting USB 2.0 / USB 3.0 devices:
Connect your USB devices to the USB ports on the display dock. As long as one
USB device is connected to a port and the connection works properly, make
sure it’s plugged into a working electrical outlet if your device (e.g. printer,
optical drive, etc.) came with its own AC adapter.
4.
Connecting Microphones and Speakers/Headphones:
To connect your speaker/headphones, insert the plug into the green hole on the
front of the display dock. To connect a microphone, insert the plug into the pink
hole on the front of the display dock.
5.
Once you finish the installation, you can open the Windows Device Manager to
verify whether your USB 3.0 Display Dock has been properly installed. To access
the Device Manager:
Under USB Display Adapters, you should see an item named USB3.0 Dual Display
Docking Station.
If there is a question or exclamation mark next to that item, then the driver is not
properly installed. Please delete the item, select the Delete the driver software
for this device option (if provided), unplug the adapter from your computer, and
then repeat the installation steps.
In Windows 7: Right-click Computer on the desktop and click System
Properties>Device Manager.
In Windows XP: Right-click My Computer on the desktop and click Properties
> (Hardware) > Device Manager.
Verifying the Installation
Table of contents
Other Anker Docking Station manuals
Anker
Anker PowerExpand User manual
Anker
Anker PowerExpand Elite 13-in-1 Thunderbolt 3 Dock User manual
Anker
Anker Power Expand Elite 12-in-1 Thunderbolt 4... User manual
Anker
Anker 563 User manual
Anker
Anker 564 User manual
Anker
Anker 6 Series User manual
Anker
Anker Y1010 User manual
Anker
Anker PowerExpand A8398 User manual
Anker
Anker 568 User manual
Anker
Anker 778 User manual
