Animo OptiVend HS DUO NG User manual
/i
OptiVend HS DUO NG
gebruiksaanwijzing betjeningsvejledning
user manual brukerhåndbok
betriebsanleitung användarmanual
mode d’emploi käyttöohjekirja
EN 43 2016/02 Rev. 0.0
English
Copyright
© 2016 Animo®
No part of this document may be reproduced and/or made public in print, microfilm, electronic media or
any other form without the manufacturer’s prior consent. This also applies to the corresponding
diagrams and/or charts.
Animo retains the right to alter parts at any given time without prior or immediate announcement to the
consumer. The content of this manual can also be changed without any prior warning. This manual is
valid for the standard model of the device. Animo can therefore not be held liable for possible damage
resulting from specifications deviating from the standard model for the device supplied to you.
This manual was created with the utmost care, but the manufacturer cannot be held responsible for any
mistakes in this document or their consequences.
This manual was originally written in English. All other languages in this document are a translation of
the English source text.
2016/02 Rev. 0.0 44 EN
OptiVend NG
TABLE OF CONTENTS
Copyright ................................................................................................................................. 43
1 Safety ........................................................................................................................................ 45
1.1 Important information ....................................................................................................... 45
1.2 Warning signs ................................................................................................................... 45
1.3 Intended use ..................................................................................................................... 46
1.4 Modifications .................................................................................................................... 46
1.5 Safety devices .................................................................................................................. 47
1.6 Safety precautions ............................................................................................................ 48
1.7 Users ................................................................................................................................ 50
1.8 Directives .......................................................................................................................... 51
1.9 Guarantee ........................................................................................................................ 51
1.10 Disposal ............................................................................................................................ 51
1.11 Further help and information ............................................................................................ 51
2 Description ............................................................................................................................... 52
2.1 Overview .......................................................................................................................... 52
2.2 Working principle .............................................................................................................. 55
2.3 Specifications ................................................................................................................... 56
2.4 Display .............................................................................................................................. 58
2.5 Configuration menu .......................................................................................................... 59
2.6 Canister configuration ...................................................................................................... 61
2.7 Energy safe mode ............................................................................................................ 62
3 Transport & Installation .......................................................................................................... 64
3.1 Transport .......................................................................................................................... 64
3.2 Installation ........................................................................................................................ 64
4 Operation ................................................................................................................................. 69
4.1 Overview control panel ..................................................................................................... 69
4.2 Overview control panel (inside) ........................................................................................ 70
4.3 Opening the door .............................................................................................................. 70
4.4 Switching on and off ......................................................................................................... 71
4.5 Start dispensing cups ....................................................................................................... 71
4.6 Start dispensing jugs ........................................................................................................ 71
4.7 Stop dispensing cups or jugs ........................................................................................... 72
4.8 Filling the instant canisters ............................................................................................... 72
4.9 Using the coin mechanism (optional) ............................................................................... 73
4.10 Using the coin changer (optional) ..................................................................................... 73
5 Maintenance ............................................................................................................................. 74
5.1 Cleaning and disinfecting detergents ............................................................................... 74
5.2 Cleaning ........................................................................................................................... 74
6 Troubleshooting ...................................................................................................................... 78
6.1 Error messages ................................................................................................................ 78
6.2 Display messages ............................................................................................................ 80
6.3 Malfunctions ..................................................................................................................... 81
EN 45 2016/02 Rev. 0.0
OptiVend NG
1 Safety
1.1 Important information
This user manual is intended to help you operate this machine safely and effectively. This manual gives
information about installation, operation and maintenance of the equipment. Make sure to read and
understand the manual before use.
It is your responsibility to operate this machine in accordance with all the safety instructions and
procedures in this manual, and with all other safety procedures in your workplace. It is the user's
responsibility to make sure that the machine is correctly installed, configured, commissioned, operated,
serviced and maintained and that such actions are only carried out by people who have been fully and
properly trained for those tasks. It is also the user's responsibility to make sure that the machine is only
used in full accordance with laws - and regulations, which have the force of law - in the jurisdiction in
which the machine is installed.
1.2 Warning signs
Safety signs are attached to the machine to give safety information. All safety signs are repeated and
usually further explained in this manual.
1.2.1 Classification of safety signs
Safety signs are of the internationally accepted types and described below.
WARNING
Before attempting to use the machine, read, understand and know all the safety information in
this chapter. Pay particular attention to all warnings and cautions throughout this manual. If
you do not follow all the warnings and procedures in this manual, this could lead to serious
injury to yourself or others, including death.
WARNING
If there is any safety instruction or procedure that you do not understand, do not use the
machine. Contact your supervisor and arrange proper training on the use of the machine. Use
of the machine without understanding and following all the safety instructions and procedures
in this manual could lead to serious injury to yourself or others, including death.
WARNING
Do not use the machine until you have received adequate and proper training in its safe and
effective use. If you are unsure of your ability to use the machine safely and effectively, do not
do so. Never attempt to remove, modify, over-ride or frustrate any safety device on the
machine. Interfering with safety devices could lead to fatal or other serious personal injury.
Note
The A-weighted sound pressure level of the machine is below 70 dB.
WARNING
Warning sign that identifies a hazard.
2016/02 Rev. 0.0 46 EN
OptiVend NG
1.2.2 Warning, caution and note
1.3 Intended use
The machine is an assembly to make hot drinks. Any other or additional use will be considered to be not
in conformity with the purpose. The manufacturer cannot be held liable for any damages caused by use
for any other purposes than what is described above or by incorrect operation.
1.4 Modifications
Animo is always willing to discuss improving the value of its machines to users by means of
modifications or alterations. Refer to ’Further help and information’.
WARNING
‘Warning' identifies a hazard that could lead to personal injury, including death.
Caution
'Caution' identifies a hazard that could lead to damage to the machine, damage to other
equipment and/or environmental pollution.
Note
’Note' is used to highlight additional information.
WARNING
Do not use products that do not comply with the applicable foodstuffs regulations.
Note
This machine may only be used for commercial settings. This is not a household appliance.
WARNING
Do not attempt to make any modifications or alterations to the machine without the prior
express agreement of Animo. Unauthorised modifications or alterations to the machine could
lead to serious personal injury, including death.
WARNING
Do not attempt to change, remove or defeat the safety features.
WARNING
Do not attempt to apply changes that violate local, regional or national regulations.
WARNING
Make sure the main switch and operating button are freely accessible.
EN 47 2016/02 Rev. 0.0
OptiVend NG
1.5 Safety devices
1.5.1 Temperature safety device
The temperature safety device turns off the heating element if the temperature is too high. It prevents
the machine from boiling dry. The temperature safety device can be operated manually.
1 Remove the cap (A).
2 Press the reset button (B).
1.5.2 On/Off switch
The on/off switch (A) puts the machine in the on/off position. The machine can still be charged after the
machine is switched off. Unplug the machine to make sure that the machine is entirely uncharged.
BA
A
WARNING
The on/off switch does not switch off all internal parts. Always disconnect the machine from
the electricity before opening it.
2016/02 Rev. 0.0 48 EN
OptiVend NG
1.5.3 Cancel button
The cancel button (A) cancels the selected recipe.
1.5.4 Display
The display (A) shows technical malfunction with error codes. The display also provides additional user
information or warnings.
1.6 Safety precautions
1.6.1 General safety precautions
• Make sure that the environment around the machine is dry, clean and lit sufficiently well.
• Keep away from moving parts.
• Use Animo replacement parts only.
• Use Animo recommended products only.
A
A
EN 49 2016/02 Rev. 0.0
OptiVend NG
1.6.2 During installation
• Place the machine in horizontal position at work top height on a firm and flat surface.
• Keep sufficient space around the machine for ventilation.
• Keep the front and back sides of the machine accessible for maintenance and repair purposes.
• Plug the machine into a safety-grounded power outlet.
• If the machine is delivered with a fixed supply cord, incorporate a means for disconnection in the
fixed wiring, in accordance with the wiring rules.
• Make sure the machine does not leak.
• Do not place the machine in an area where a water jet could be used.
• Observe local regulations and use approved materials and parts.
• Check if the details on the type plate correspond to the country.
• Do not place the machine in an area with temperatures below 0 °C.
The ambient temperature for correct operation is between 0°C and 40°C.
1.6.3 During normal operation
• Inspect the machine for damage before use.
• Do not tilt the machine.
• Do not submerge or hose down the machine.
• Do not use sharp objects to operate the machine.
• Keep the operating controls free of dirt and grease.
• Ensure the ambient temperature is always between 0°C and 40°C.
• Switch off the machine and unplug the water supply when the machine is not used for a longer
period of time.
1.6.4 During maintenance and repair
• Perform regular maintenance on the machine.
• Do not clean the machine using a water jet.
• The ambient temperature for correct operation is between 0°C and 40°C.
• Wear protective gloves when performing maintenance.
• Do not leave the machine during maintenance.
• Make sure that the repairs are performed by trained and authorised personnel only.
• Unplug the machine to perform maintenance regarding error messages.
Caution
If the machine is nevertheless frozen:
1. Switch off the machine.
2. Unplug the machine from mains power.
3. Unplug the water supply.
4. Contact the dealer or service engineer.
WARNING
To entirely uncharge the machine, unplug the machine.
2016/02 Rev. 0.0 50 EN
OptiVend NG
1.6.5 Replacement instructions
• If the power supply cord is damaged:
- If a separate supply cord is delivered with the machine, replace it by a new supply cord in order
to avoid a hazard. Use Animo replacement parts only.
- If the machine is delivered with a fixed supply cord, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
• Always use the new hose-set supplied with the machine. Old hose-sets or other hose-sets should
not be used.
1.7 Users
1.7.1 Personnel qualifications
• The machine is designed only for personnel being 8 years or older. Consider the respective national
regulations for occupational safety and health.
• The machine must not be operated by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless:
- they are under supervision, or
- they have been instructed how to use the machine in a safe way, and they understand the
hazards involved.
• Children must not play with the machine.
• Cleaning and user maintenance shall not be made by children without supervision.
• Only personnel who have been given permission are allowed to work with the machine.
• All personnel must only carry out the work they have been trained to perform. This applies to both
maintenance work and the normal machine operation.
• All personnel working with the machine must have free access to the applicable manuals.
• The operators must be familiar with all situations that may occur so that they can act rapidly and
effectively in the event of emergencies.
1.7.2 Personal and food hygiene
The machine processes drinks for human consumption. So the highest standards of hygiene are to be
maintained within the process area.
• Wash your hands thoroughly before entering the process area.
• Remove your watch and any loose jewellery before entering the process area.
• Make sure that the machine is cleaned regularly.
WARNING
To entirely uncharge the machine, unplug the machine.
Caution
As an operator, you should have received training in personal and food hygiene from your
employer(s). If you have not, do not use the machine or enter the process area. Arrange
training with your supervisor or training manager. Working in the process area without a good
understanding of hygiene can lead to contamination of drinks.
EN 51 2016/02 Rev. 0.0
OptiVend NG
1.8 Directives
This machine meets the following EC directives:
/i
/i
1.9 Guarantee
The guarantee provisions that apply to this machine are part of the general terms of delivery.
1.10 Disposal
The use and maintenance of the machine includes no environmental dangers. Most parts can be
disposed in the regular way.
1.11 Further help and information
Animo is committed to provide the highest level of support to users and operators of its products.
Contact the dealer for information regarding settings, maintenance and repair work, which is not
included in this document.
EMC directive: 2004/108/EC
Low voltage directive: 2006/95/EC
Machinery directive: 2006/42/EC
RoHS directive: 2002/95/EC
WEEE directive: 2002/96/EC
Food contact directive: 1935/2004/EC
Note
Ensure compliance with local legislation, regulations, instructions and precautions concerning
health, safety and environment.
Table of contents
Other Animo Coffee Maker manuals
Animo
Animo OptiBean Product guide
Animo
Animo B100 User manual
Animo
Animo M200W User manual
Animo
Animo PROFESSIONAL 25P User manual
Animo
Animo M200 User manual
Animo
Animo OptiBean User manual
Animo
Animo TV B200 W User manual
Animo
Animo OptiBean Product guide
Animo
Animo M series Assembly instructions
Animo
Animo OptiFresh Bean Product guide
Animo
Animo OptiFresh Product guide
Animo
Animo ComBi-line Series User manual
Animo
Animo Aromatic A 100 User manual
Animo
Animo TA 100 User manual
Animo
Animo B 200 WF User manual
Animo
Animo OptiBean TOUCH 2017 Product guide
Animo
Animo OptiFresh Touch Product guide
Animo
Animo M100 M-LINE Series User manual
Animo
Animo M series User manual
Animo
Animo OptiFresh Bean User manual
