Andea Electronics RL865 User manual
RL865 Micro-power Multi-protocol
Reader
User Manual
◆Before you use this product, please read this manual carefully, and properly keep
it for future reference.
◆As our products continue improving, they may be changed without advanced
notice.
◆The copyright of this manual belongs to our company. Unauthorized plagiarism or
dissemination will be held legally responsible.
Version:V1.0
User manual
Contents
1. Product Overview........................................................................ 1
1.1. Introduction.............................................................................. 1
1.2. Product Features ...................................................................... 1
1.3. Pictures .................................................................................... 1
1.4. Main Parameter........................................................................ 2
2. Hardware Interface Description................................................... 2
3. Description Of Indicator Light..................................................... 3
4. Device Connection Instructions................................................... 3
4.1. Device Connection Instructions............................................... 3
4.2. Configuration Description Of Parameters................................ 5
4.2.1. Communication Interface............................................. 5
4.2.2. Buzzer Default Parameters........................................... 6
4.2.3. RF Parameters.............................................................. 6
4.2.4. Inventory Parameters................................................... 8
4.2.5. System Work Mode...................................................... 9
4.3. Testing.................................................................................... 10
4.3.1. Multi-tags Inventory Testing...................................... 10
4.3.2. Single Tag Operation Testing......................................11
5. Technical Support ...................................................................... 13
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 1/15
http://www.gzandea.com
1. Product Overview
1.1. Introduction
RL865 is a micro-power multi-protocol reader with high sensitivity reading and
writing performance and fast anti-collision processing algorithm which supports reading
multiple electronic tags of various protocols at the same time.
This product is widely used in desktop card issuance, access control, electronic
bills, Libraries and other fields.
1.2. Product Features
➢Operating frequency: 13.56MHz;
➢Support ISO 15693,ISO 14443A and ISO 18000-3M3 standard;
➢Support ISO 14443A protocol multi-card simultaneous reading;
➢Support ISO 15693 protocol multi-card simultaneous reading;
➢Support anti-collision treatment;
➢Communication interface: USB;
➢Power supply:150mA /5V.
1.3. Pictures
Figure 1 Front and back view of the product
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 2/15
http://www.gzandea.com
1.4. Main Parameter
The technical parameters of the reader are as follows:
Table 1 Description of main technical parameters of the product
Parameter
Description
Operating Frequency
13.56Mhz
Support Standard
ISO 15693、ISO 14443A、ISO 18000-3M3
Communication
Interface
USB
Voltage
150mA /5V
Maximum Recognition
Distance
ISO 15693：11cm
ISO 14443A：7cm
Standard Sizes
54×34.5mm
Maximum Operating
Temperature
50℃
Note: ①Product specifications are approximate, please refer to the actual size;
②Due to continuous improvement of our products, technical parameters are
subject to change without notice.
2. Hardware Interface Description
Figure 2 Product dimension (unit: mm)
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 3/15
http://www.gzandea.com
3. Description Of Indicator Light
Tag detection indicator light
Working light
Figure 3 Schematic diagram of product indicators and interfaces
Table 2 Product indicator description
Type
Name
Functional Description
Device
indicator light
Working light
After the device is powered on and the
performance is normal, the light flashes red (slow
flashing), and the light is not bright when it is
abnormal; when the device is performing
inventory work, the light flashes red quickly.
Tag detection
indicator light
When a tag is detected, this light flashes blue,
otherwise this light does not light.
4. Device Connection Instructions
4.1. Device Connection Instructions
USB cable
Figure 4 Connection diagram
After the device is connected and powered on normally, open the R-Tool folder of
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 4/15
http://www.gzandea.com
the configuration tool and find the file in the folder directory.
Double-click this file to open the configuration tool, as shown below:
Figure 5 R-Tool connection interface
Since the device is connected via USB, you need to select "USB" in the
[Communication Interface] item under [Search Parameters]. The search steps are as
follows:
①Select “USB” for the
communication interface
②Click the "Search"
button to search devices
③Select the searched device
④Click the start button to enter the
device configuration and test interface
Figure 6 Connection steps
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 5/15
http://www.gzandea.com
Figure 7 Enter the device configuration and test interface
4.2. Configuration Description Of Parameters
4.2.1.Communication Interface
Figure 8 Configuration interface for communication interface
⚫Bus Address: between 1-255
⚫Baud: baud rate: 9600, 19200, 38400, 57600, 115200, 230400
⚫Parity: parity check type: None, Odd, Even
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 6/15
http://www.gzandea.com
4.2.2.Buzzer Default Parameters
Figure 9 Configuration interface for buzzer default parameters
⚫Type: Unchanged, On, Off, Flash.
⚫Frequency: value range from 0 to 255, only applicable for the "Flash" type.
⚫Active time: the frequency of buzzer, only applicable for the "Flash" type.
Note: The device V00.02 and above (including V00.02 version) supports this function
(buzzer is required).
4.2.3.RF Parameters
Figure 10 Configuration interface for RF parameters
⚫Basic options
1)Auto close RF when RF is free for specified time：in the host control mode, the
User manual
Guangzhou Andea Electronics Technology Co., Ltd. 7/15
http://www.gzandea.com
device will automatically close the RF if it does not receive a command of card
reading or opening the RF.
2)Timing for Auto Close RF：Value range: 0-256, the RF enters the idle mode if
no operation in a specified time.
⚫Air protocol selection
1) ISO15693: Enable to count tags of ISO15693 air protocol.
2) ISO14443A: Enable to count tags of ISO14443A air protocol.
3) ISO18000p3m3: Enable to count tags of ISO18000p3m3 air protocol.
4) ISO14443B: Enable to count tags of ISO14443B air protocol.
⚫ISO15693
1) Data coding: 1/4, 1/256.
2) Subcarrier: single negative carrier, double negative carrier.
3) ASK 10%: ASK modulation depth setting takes effect after the button is ticked.
Otherwise, it is ASK 100%.
4) ASK modulation depth: 0.5% -60%
⚫ISO18000p3m3
1)M: Manchester 2,Manchester 4
2) DR:FC/16847khz, FC/32424khz
3) Modulation depth:0.5%-29%
⚫Receiver Gain: set according to the default value, it is not recommended to
modify.
Table of contents
Other Andea Electronics Card Reader manuals
