Press the switch for about 3 seconds in any lighting mode, 2XPE is on, Note:
Step 2: 2XPE ON /OFF
When the light is on, the default 2XPE lighting mode is cool white (100% brightness),
briefly press the button again to turn 2XPE SOS -off the light.
Connect the USB charging cable to the Type-C port to charge your device.
The charging power is Dc 5V/1.5A. The full charging time is 3 hours.
You can use it as a power bank. The port is USB output and the output
power is DC 5V/1.5A.
Step 4: USB Output Port
1. Strong magnetic installation, there is a strong magnet at the bottom of the lamp,
which can be magnetically attracted to the surface of metal-iron materials.
2. Carabiner installation, the screw at the bottom of the lamp can be turned clockwise
to install the carabiner, and the carabiner can be installed with a hook.
3. Tripod installation, the screw at the bottom of the lamp can be turned clockwise to
install the tripod.
Attention
1. Do not look directly at the LED light, it may hurt your eyes.
2. Please use the USB charging cable to charge the lamp before use. The input
power is DC 5V/1.5A, and it takes about 3 hours to fully charge the lamp. During
charging, the blue charging indicator will flash, and when it is fully charged, 4 blue
indicator lights will light up at the same time, indicating 100%power, 1 blue indicator
means 25% power, and the power can be judged by the number
of bright blue indicators, how many.
Step 5: Installation
Step 3: USB Charging Connection
