AMTC RE3002 User manual
1
RE3001, RE3002
300Mbps Wi-Fi Range Extender
User Guide
2
Important Safety Instructions
1. Do not open this product or attempt to service it; it may expose you to dangerous high voltage or
other risks.
2. Do not operate this product near water.
3. Do not place or operate this product near a radiator or a heat register.
4. Do not expose this product to dampness, dust or corrosive liquids.
5. Do not connect this product or disconnect it from a wall socket during a lightning or a
thunderstorm.
6. Do not block the ventilation slots of this product, for insufficient airflow may harm it.
7. Do not put anything on this product.
8. Plug this product directly into a wall socket (100-240V~, 50/60Hz). Do not use an extension cord
between this product and the AC power source.
9. When plugging this product into a wall socket, make sure that the electrical socket is not
damaged, and that there is no gas leakage.
10. Place the connecting cables properly so that people won’t stumble or walk on it.
11. This product should be operated from the type of power indicated on the marking label. If you
are not sure of the type of power available, consult the qualified technician.
12. Unplug this product from the mains and refer the product to qualified service personnel for the
following conditions:
1) If liquid has been spilled on the product.
2) If the product has been exposed to rain or water.
13. Unplug this product from the wall socket before cleaning. Use a damp cloth for cleaning. Do
not use liquid cleaners or aerosol cleaners.
14. The specification of the fuse is for RE3002 to avoid damage, please do not change the fuse.
15. The Operating temperature is 0℃~40℃(32℉~104℉). The Storage temperature is -40℃~70℃
(-40℉~158℉).
3
Preface
Thank you for choosing MTC! Please read this user guide before you start! This user guide
instructs you to install and configure your device. This user guide applies to RE3001\RE3002, the
RE3001 is used as an example throughout this user guide. This user guide uses the following
formats to highlight special messages:
ICON
Description
Note
This format is used to highlight information of
importance or special interest. Ignoring this type
of note may result in ineffective configurations,
loss of data or damage to device.
Tip
This format is used to highlight a procedure that
will save time or resources.
Knowledge Expansion
Description of fields on the device GUI.
4
Contents
Important Safety Instructions..........................................................................................................................2
Preface...........................................................................................................................................................3
Contents ..........................................................................................................................................................4
Chapter 1 Introduction....................................................................................................................................6
1.1 Product Overview..............................................................................................................................6
1.2 Product Feature.................................................................................................................................6
Chapter 2 Connecting Mechanism..................................................................................................................7
2.1 Appearance .......................................................................................................................................7
2.1.1 The products front panel........................................................................................................7
2.1.2 The product rear panel...........................................................................................................8
2.2 system requirement ..........................................................................................................................9
2.3 Connection Instruction......................................................................................................................9
2.3.1 Getting Prepared ....................................................................................................................9
2.3.2 Installment environment........................................................................................................ 9
Chapter 3 Configuring the Device Manually .................................................................................................17
3.1 Log in the Wi-Fi Range Extender .....................................................................................................17
3.2 System Status ..................................................................................................................................21
3.2.1 Network Status.....................................................................................................................21
3.2.2 System status........................................................................................................................23
3.2.3 LAN Status ............................................................................................................................24
3.2.4 Wireless Status .....................................................................................................................25
3.3 Quick Setup .....................................................................................................................................25
3.4 Network Settings .............................................................................................................................30
3.4.1 LAN Settings..........................................................................................................................30
3.4.2 DHCP Server ......................................................................................................................... 32
3.4.3 DHCP List & Binding..............................................................................................................34
3.5 WLAN Settings.................................................................................................................................35
3.5.1 Basic Settings........................................................................................................................35
3.5.2 Security Settings ...................................................................................................................37
3.5.3 Advanced Settings ................................................................................................................40
3.5.4 Access Control ......................................................................................................................41
3.5.5 Connection Status ................................................................................................................43
3.6 System Tools ....................................................................................................................................43
3.6.1 Time Settings ........................................................................................................................43
3.6.2 Backup/Restore ....................................................................................................................45
3.6.3 Restore to Factory ................................................................................................................45
3.6.4 Firmware Upgrade................................................................................................................47
3.6.5 Reboot ..................................................................................................................................48
3.6.6 Change Password.................................................................................................................. 48
3.6.7 System Log............................................................................................................................ 49
Appendix .......................................................................................................................................................50
5
1 Configure PC TCP/IP Settings..............................................................................................................50
Windows 7..................................................................................................................................... 50
Windows XP................................................................................................................................... 56
2 Troubleshooting..................................................................................................................................58
3 Factory default settings ......................................................................................................................59
4 Remove Wireless Network from Your PC ...........................................................................................60
Windows 7..................................................................................................................................... 60
Windows XP................................................................................................................................... 61
5 Safety and Emission Statement ..........................................................................................................63
6
Chapter 1 Introduction
1.1 Product Overview
The Wi-Fi Range Extender is dedicated to Small Office Home Office (SOHO) wireless network
solutions. It will extend your existing wireless network and mobility within your wireless network
while also allowing you to connect a wired device to a wireless environment. Increased mobility
and the absence of cabling will be beneficial for your network.
With using IEEE 802.11N wireless technology, this device can transmit wireless data at the rate of
up to 300Mbps (2.4GHz) with multiple protection, including Wi-Fi protected Access (WPA2-PSK,
WPA-PSK)，the Wi-Fi Range Extender delivers complete data privacy. It is also compatible with all
IEEE 802.11n, IEEE 802.11b and IEEE 802.11g specification.
It supports an easy wireless connection to the up level router (equipped with WPS/QSS button) by
pressing the RET/RE button on the side panel. It also supports an easy web-based setup for
installation and management. Even though you may not be familiar with the Wi-Fi Range Extender,
you can easily configure it with the help of this Guide. Before installing the Wi-Fi Range Extender,
please look through this Guide to get the full information of the Wi-Fi Range Extender.
1.2 Product Feature
Compatible with IEEE 802.11b/g/n.
Provides multiple encryption security Types including WPA-PSKWPA2-PSK.
Supports Built-in DHCP server.
Supports Firmware Upgrade.
Supports Web-based Management.
7
Chapter 2 Connecting Mechanism
2.1 Appearance
2.1.1 The products front panel
The LED indicator displays information about the Wi-Fi Range Extender’s status.
Indicate
Status
Indication
SYS
On
The Wi-Fi Range Extender is on.
OFF
The Wi-Fi Range Extender is off.
RE
Fast Flashing
WPS connection in progress. It may take up to 2
minutes.
Slow flashing
The Wi-Fi Range Extender has established a secure
connection, and the signal strength is adequate.
8
OFF
No active connection.
WIFI
Flashing
WiFi Function is On
OFF
WiFi Function is OFF (you can setting the WIFI
function ON/OFF in the BASIC settings)
LAN
On
A device is connected to the ETHERNET port.
OFF
No device is connected to the ETHERNET port.
RE/RST:
Under the electricity situation, press and hold the button (about 6 seconds) until all the
LEDs turn on momentarily, then release the button and wait the Wi-Fi Range Extender to
reboot to its factory default setting. You can enter the Wi-Fi Range Extender use the
default password(password: admin).
Under the Universal Repeater mode, press the RE/RST button on the Wi-Fi Range
Extender upper panel with the up level router’s WPS/QSS button at the same time about
1-3s, the Wi-Fi Range Extender will automatically connect with the up level router.
2.1.2 The product rear panel
Button and Interface description
LAN Port: LAN jack (RJ45), used to connect LAN in hub, switch or installed network card
computer.
9
2.2 system requirement
Every PC Ethernet connection device (wired internet card or wireless internet card and
Ethernet cable).
TCP/IP network software (compatible with Window XP/Window 7/Window 8).
Internet Explorer 8 or higher versions or Firefox.
2.3 Connection Instruction
2.3.1 Getting Prepared
Before you start the installation process, you need to prepare the following things:
Item
Description
Range Extender
Find it in your package
PC
Should have installed IE8 or higher browser
Gather ISP
Information
AP mode:
1.Internet connection information provided by the up level router
2. Ethernet Cable: This can be found in the product package. You will need it
to connect your PC to this device
Universal Repeater mode:
1. Up level router's SSID, MAC address, security mode, cipher type and
security key
2. Internet connection information provided by the up level router
3. Ethernet Cable: This can be found in the product package. You will need it
to connect your PC to this device
2.3.2 Installment environment
To ensure the optimum performance of the ranger extender and significantly improve the
transmission capacity of the network, we recommend that you comply with the following
10
connection rules:
1. Plug the ranger extender directly into a wall socket but not the multiple sockets.
2. To take full advantage of the filter function of the Repeater and to improve data transmission in
the network, always plug the multiple sockets into the integrated electrical socket of the
Repeater.
This manual suits for next models
1
Table of contents
