Amped Wireless HighPower AC1750 User manual
SETUP GUIDE
PROSERIES
HIGHPOWERTM
AC1750
WI-FI®ACCESS POINT / ROUTER
1
CONTENTS
PACKAGE CONTENTS............................................2
Package Contents .................................................. 2
LED Indicators ........................................................ 3
Mounting Instructions ........................................... 5
GETTING STARTED ...............................................6
OPERATIONAL MODES (BASIC SETUP)..................7
ROUTER MODE ...................................................... 8
ACCESS POINT MODE .......................................... 18
WDS –ACCESS POINT MODE............................... 25
MANAGED ACCESS POINT MODE ........................ 32
ACCESS POINT CONTROLLER MODE .................... 33
WEB MENU NAVIGATION AND FEATURES .........44
WI-FI Settings....................................................... 45
Network Settings.................................................. 46
Advanced Settings................................................ 47
Administration ..................................................... 47
ACCESS POINT CONTROLLER FEATURES .............48
WALK THROUGH: Configuring an Access Point.... 49
Dashboard............................................................ 52
Managed AP Status.............................................. 53
Managed AP Settings ........................................... 55
LIMITED WARRANTY .........................................58
LEGAL NOTICES AND DISCLAIMERS ....................60
2
PACKAGE CONTENTS
Package Contents
Check to make sure you have all the contents within your package:
ProSeries High Power AC1750 Wi-Fi Access Point / Router
3 x Detachable High Gain 3dBi Antennas
Magnetic Mounting Kit & Mounting Template
Setup Guide
CD: User’s Guide
Ethernet Cable
Power Adapter
3
LED INDICATORS
From left to right:
PoE: Indicates when there is an active PoE connection on the LAN1 wired port. LED will remain on.
USB: Indicates when there is a USB device is attached to the USB port.
5.0GHz Wi-Fi:Blinks rapidly when Wi-Fi data traffic is transmitted or received over the wireless network.
2.4GHz Wi-Fi:Blinks rapidly when Wi-Fi data traffic is transmitted or received over the wireless network.
Wired Port 2: Indicates when a networking device is connected to wired port (LAN2) on the Access Point /
Router. The LED will blink rapidly when wired data traffic is transmitted or received.
Wired Port 1: Indicates when a networking device or modem is connected to wired port (LAN1 / WAN) on the
Access Point / Router. The LED will blink rapidly when wired data traffic is transmitted or received.
Status: Blinks when the Access Point / Router is booting up or resetting.
Power (PWR): Indicates when the Access Point / Router is powered on. The LED will remain on.
4
SIDE PANEL DESCRIPTION
PWR: Power adapter port. 12V 4A.
LAN1 / WAN (PoE): Gigabit RJ-45 port with Power over Ethernet input. Connect wired devices or to a PoE
switch to use the Access Point without the power adapter. Functions as the port connected to your network
in Access Point modes and WAN port in Router mode.
LAN2: Gigabit RJ-45 local network port for expanding your network.
USB:Attach USB devices to save or load settings, upgrade firmware, save system logs or load boot files.
Eject: To safely eject an attached USB device.
Console: Connect to a management console for diagnostics. (i.e. HyperTerminal)
WPS: Enables Wi-Fi Protected Setup’s push button configuration.
On/Off: Device power on/off switch.
5
MOUNTING INSTRUCTIONS
Magnetic Mounting
The mounting kit included with the Access Point provides a convenient
method to mount the Access Point on a wall or ceiling. Once you have
chosen the location for where you want to install the Access Point, locate
the Mounting Template. Use it to mark the screw hole locations onto
your wall.
Once the screw holes have been marked, locate the Magnetic Mounting
Kit and use the included screws to fasten the two magnetic plates to the
wall.
Once the plates are fastened, attach the Access Point to the wall plates
and check that the magnets are firmly holding the Access Point to the
wall.
Wall Mounting
In addition to the Magnetic Mounting Kit, the Access Point can also be
mounted using the standard wall mounting clips on the bottom of the device.
6
GETTING STARTED
a) Attach the included antennas to the antenna ports on the Access Point / Router.
b) Power on the Access Point / Router by attaching either the power adapter to the Access Point /
Router and plugging in the other end into a power outlet or attaching a PoE Ethernet cable to LAN1 /
WAN on the side panel and the other end to an active PoE switch.
c) Connect to the Access Point / Router with your computer by attaching an Ethernet cable to the LAN2
ports on the side panel or connect to the Access Point / Router’s Wi-Fi network: Amped_APR_2.4 or
Amped_APR_5.0. Password: wireless
7
OPERATIONAL MODES (BASIC SETUP)
The Access Point features five different operational modes that can be configured via the web menu:
-Router
-Access Point
-WDS Access Point
-Managed Access Point
-Access Point Controller
8
ROUTER MODE OVERVIEW
Share a single Internet connection via a connection to a broadband modem or other Internet source and
provide a secure firewall for your network. Router mode features 2.4GHz and 5.0GHz Wi-Fi connections as well
as one wired port for local wired devices and switches.
9
ROUTER MODE BASIC SETUP
Setup Preparations
Disconnect and power off your existing router (if you have one).
Disconnect your existing router from your computer, your broadband
modem and its power outlet. If you do not have an existing router please
continue to the next step.
Power off your Modem
Power off the modem by disconnecting the modem’s power adapter
from the power outlet. If your modem has a backup battery, remove the
backup battery from your modem. Do NOT power on the modem until
prompted at a later step.
Other manuals for HighPower AC1750
1
Table of contents
Other Amped Wireless Wireless Router manuals
Amped Wireless
Amped Wireless R20000G User manual
Amped Wireless
Amped Wireless RTA2600 HighPower User manual
Amped Wireless
Amped Wireless ATHENA-R2 User manual
Amped Wireless
Amped Wireless RTA1750 User manual
Amped Wireless
Amped Wireless R20000G User manual
Amped Wireless
Amped Wireless R10000G Installation guide
Amped Wireless
Amped Wireless R10000 User manual
Amped Wireless
Amped Wireless RTA1750 User manual
Amped Wireless
Amped Wireless R10000G User manual
Amped Wireless
Amped Wireless RTA1200 User guide
Amped Wireless
Amped Wireless HIGHPOWER AC1200 User manual
Amped Wireless
Amped Wireless ALLY User manual
Amped Wireless
Amped Wireless ATHENA HIGHPOWER AC2600 User manual
Amped Wireless
Amped Wireless RTA1200 User manual
Amped Wireless
Amped Wireless TAP-EX2 User manual
Amped Wireless
Amped Wireless REC22A User manual
Amped Wireless
Amped Wireless ATHENA User manual
Amped Wireless
Amped Wireless RTA1300M User manual
Amped Wireless
Amped Wireless R10000 User manual
Amped Wireless
Amped Wireless TAP-R3 User manual
