Amica AEA60BL User manual

INSTRUCTIONS FOR USE

Before starting the appliance, please read this operating manual carefully.

AEA60BL

AEA90BL

Angled Extractor

Importantinformation......................................................................3

Important notes................................................................................4

Ducting.............................................................................................5

Using your extractor........................................................................7

Care and maintenance.....................................................................9

Changing the charcoal lter.........................................................10

LED lighting....................................................................................11

Electrical information....................................................................12

Troubleshooting............................................................................14

Mounting your extractor...............................................................15

Installation.....................................................................................16

Installation diagrams.....................................................................17

Installation diagrams.....................................................................18

Energy e󰀩ciency information......................................................19

CONTENTS

Amica International cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that Amica reserve the right to invalidate the guarantee supplied

with this product following incorrect installation or misuse of the

appliance or use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualied personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist Amica Customer Care in the event of a fault

with your appliance and to register your appliance for guarantee

purposes.

EU Declarations of Conformity:

This appliance has been manufactured to the strictest standards

Appliance Model

Serial Number

IMPORTANT INFORMATION

and complies with all applicable legislation, including Gas

safety, Electrical safety (LVD) and Electromagnetic interference

compatibility (EMC).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing

appliance recycling services.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health. It also

enables the constituent materials to be recovered, saving both

energy and resources. As a reminder of the need to dispose of

household appliances separately, the product is marked with a

crossed-out wheeled dustbin.

Please note:

• Under no circumstances should the extractor be connected to any

gas ventilation system, ue system or hot air ducting system.

• Do not vent the extractor into an attic or loft space.

• Only house the extractor in rooms with adequate ventilation.

Remember that the extractor is powerful and whatever air is

extracted needs to be replaced.

• Do not tile the extractor in. It should be removable for service or

maintenance.

IMPORTANT NOTES

• Do not use silicone sealant to secure the hood to the wall.

• You must be able to isolate the extractor from the mains electrical

supply after installation.

• This appliance has been designed to be used in a room

with a volume of less than 36m³.

• Steam cleaners must not be used when cleaning this appliance.

• The performance of your extractor will vary depending on a

number of factors. These include: type of extraction, length of

ducting, room volume, ventilation available and cleanliness of the

lters.

Ducting

For best performance and lowest noise output, we recommend the

use of 125mm ducting. Lesser diameter ducting may be used but

this will reduce performance and increase the noise of the extractor.

Wherever possible use the rigid circular pipe which has a smooth

interior, rather than the expanding concertina type ducting. The

lengths of the ducting without performance being a󰀨ected are as

follows:

• 4 metres with 1 x 90° bend.

• 3 metres with 2 x 90° bends.

• 2 metres with 3 x 90° bends.

Note:

We recommend that you seek the help of another individual when

installing this product.

DUCTING

We recommend that you wear PPE when handling this extractor.

The xings supplied are suitable for most installations. It is the

responsibility of the installer to ensure that the xings are suitable

for the ceiling type in the property.

Cover any hob, or surface below the area in which the extractor is to

be installed, so that no damage befalls it.

DUCTING

For best performance, you should switch on the extractor 15 minutes

before starting to cook and leave it to run for approximately 15 minutes

after the end of cooking.

Control Panel

ON/OFF Key/Delay timer:

Press the key to turn on or o󰀨 the extractor. If the extractor is turned

on, the delay timer can be activated by pressing the key again.

The display will show the clock symbol, ashing for approximately

4 seconds. By pressing the or keys, the delay timer can be

adjusted (maximum 9 minutes). In order to deactivate the timer delay,

press the key again.

Clock setting

To set the clock on your extractor, press and hold the key for 2

seconds. The clock display will ash. Use the or keys to set the

hour, press the key and then use the or keys to adjust the

minutes. Press the key to conrm. Please note that if no key is

pressed for 5 seconds whilst setting the time then the clock will return

to its previous setting.

Adjusting the fan speed

Once the extractor is turned on, press the or keys to set and

Fig. 1

USING YOUR EXTRACTOR

adjust the fan speed. Pressing the key rst will set the fan to

highest speed and pressing the key rst will set the fan to the

lowest speed.

Light key

Press the key to turn on/o󰀨 the lights. When the lights are on the

display will show the symbol.

USING YOUR EXTRACTOR

CARE AND MAINTENANCE

Fig. 5

Fig. 2

Fig. 3

Fig. 4

IMPORTANT : DO NOT PERFORM

MAINTENANCE OR CLEANING

OF THE EXTRACTOR WITHOUT

FIRST SWITCHING OFF THE

ELECTRICITY SUPPLY. NEVER USE

STEAM CLEANERS TO CLEAN THE

APPLIANCE.

Cleaning

You should use a non-abrasive

cleaner. Any abrasive cleaner

(including Cif) will scratch the surface

and could erase the control panel

markings.

You can clean your extractor

e󰀨ectively by simply using a dilute

solution of water and mild detergent

and drying to a shine with a clean

cloth, for example a micro-bre cloth.

Cleaning the grease lter

The grease lter should be kept clean

to minimise the risk of re.

At least once a month you should

remove and clean the grease lter

with hot soapy water. You can also wash the grease lter in a

dishwasher, ensuring that you place it in an upright position to

prevent damage from other items in the dishwasher.

To remove the grease lter, push in the button on the handle and

then pull down on the lter at the front as shown in gure 3. When

you have released it at the top, then you can pull the lter out

completely.

After rinsing and drying, reassemble the grease lter to the hood by

reversing the removal process.

Please note:

Cleaning the grease lter in the dishwasher may lead to

discolouration. This is normal and does not constitute a fault with

the appliance.

Changing the charcoal lter (re-circulating mode only)

To ensure best performance of your extractor, you should replace

the charcoal lter every four to six months, depending on use.

To attach the charcoal lter:

• Remove the grease lter as described on the previous page.

• Following the grooves on the extractor motor and on the lter,

place the charcoal lter over the motor and turn it clockwise

(right). Do not over-turn the lter.

• Finally, replace the grease lters.

CHANGING THE CHARCOAL FILTER

This manual suits for next models

Table of contents

Other Amica Ventilation Hood manuals

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual