AMD Geode LX 800 User manual

LE-366

AMD Geode TM

LX800 3.5” Embeded Board

User’s Manual

Edition 1.0

2008/02/20

LE-366 User’s Manual

-1-

The information in this document is subject to change without prior notice to make

improvements to the products.

This document contains proprietary information and protected by copyright. No part of this

document may be reproduced, copied, or translated in any form or any means without prior

written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property of their

respective owners. Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from

the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including without

limitation implied warranties of merchantability or fitness for a particular purpose.

The company has the right to revise the manual or include changes in the specifications of

the product described within it at any time without notice and without obligation to notify any

person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT

LE-366 User’s Manual

-2-

Packing List

Please check the package before you starting setup the system.

Hardware:

LE-366 series motherboard x 1

Cable Kit:

Printed Matters:

User’s Manual x 1

Driver CD x 1

Floppy Cable x 1

44-pin ATA33 IDE Cable x 1

44pin

40pin

Power Cable x 1

PS2 keyboard & mouse cable

DC_IN Power Cable x 1

RS232 Cable x 1 USB Cable x 1

LE-366 User’s Manual

-3-

Index

Chapter 1 <Introduction>....................................................................6

1.1 <Product Overview> ...............................................................................6

1.2 <Product Specification>.........................................................................7

1.3 <Mechanical Drawing> ...........................................................................9

1.4 <Block Diagram>...................................................................................10

2.1<Connector Location>...........................................................................11

2.1.1 <Connector Reference>.............................................................13

2.1.2 <External Connector>.................................................................13

2.2 <CPU and Memory Setup>...................................................................14

2.2.1 <CPU Setup> .............................................................................14

2.2.2 <Memory Setup>........................................................................14

2.3 <Enhanced IDE & CF Interface> ..........................................................16

2.4 <Floppy Port>........................................................................................17

2.4.1 <Analog VGA Interface> ............................................................18

2.4.2 <Digital Display>.........................................................................19

2.5 <GPIO Interface>...................................................................................24

2.6 <Serial Port Jumper Setting >..............................................................25

2.6.1 <Power Input>............................................................................26

2.6.2 <Power Output> .........................................................................26

Chapter 3 <BIOS Setup>....................................................................30

Appendix A <I/O Port Pin Assignment>.................................32

A.1 <IDE Port> .............................................................................................32

A.2 <Floppy Port>........................................................................................33

A.3 <Serial Port>..........................................................................................33

A.4 <CRT Port>............................................................................................34

A.5 <LAN Port>............................................................................................34

A.6 < USB Port >..........................................................................................34

LE-366 User’s Manual

-4-

A.7 <PS/2 Keyboard & Mouse Port>..........................................................35

Appendix B <Flash BIOS>................................................................37

B.1 BIOS Auto Flash Tool................................................................37

B.2 Flash Method..............................................................................37

Appendix C <System Resources>.............................................38

Appendix D <Programming GPIO’s>.......................................42

Contact Information..............................................................................45

LE-366 User’s Manual

-5-

(The Page is Left For Blank)

LE-366 User’s Manual

-6-

Chapter 1 <Introduction>

1.1 <Product Overview>

LE-366 is the Mini-ITX motherboard with AMD Geode LX800 platform, with onboard VGA,

AC97 audio, GIGA LAN interface. Based on the AMD Geode LX800 processor, the board

provides many advanced features for reduced power consumption, fan-less design and

high cost/price rate of production.

Low Power Consumption

Based on the AMD Geode LX800@500MHz processor onboard, it only takes up to 3.8W at

maximum powering, and is completely suitable for fan-less design. Without any cooling fan

onboard, it can avoid the heat problem when the cooler failed in accidence.

Onboard TFT/LVDS LCD interface

Based on the AMD Geode LX800@500Mhz of integrated graphics and 18-bit LVDS

interfaces.

Embedded Component

Due to the low profile design, the board provides CF card socket for flash disk with porting

embedded OS and up to DDR SDRAM.

Single Voltage Input

The board only requires DC 12V input. User’s can easily connect the board with an adapter

without the huge power supply.

LE-366 User’s Manual

-7-

1.2 <Product Specification>

General Specification

Form Factor 145 mm x 102 mm (5.7” x 4”)

CPU Up to AMD Geode LX 800 Processor

Memory One So-DIMM slot support DDR 266/333/400 MHz SDRAM up to

1GB

Chipset AMD Geode CS5536

BIOS Phoenix-Award 4Mb PnP Flash

Green Function ACPI 1.0 and APM 1.2 compliant

Watchdog Timer PIT (Programmable Interval Timer) with 3 channels

Real Time Clock AMD Geode CS5536 built in RTC with Lithium

Enhanced IDE UDMA ATA 33 ATA IDE connection

Multi-I/O Port

Chipset AMD Geode CS5536+Winbond W83627HG

Serial Port 1 external RS-232 port (COM1)

1 internal RS-232/422/485 port (COM2)

USB Port 2 external USB 2.0 ports

2 internal USB 2.0 ports

Floppy Port One slim type Floppy port

K/B & Mouse 1 PS 2 port

GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O

interface

VGA Display Interface

Chipset Built in Geode LX Processor High performance 2D graphics

controller

Memory Shared system memory up to 4MB

Frame Buffer Up to 256MB shared with system memory

Display Type Support 1920x1440 in CRT mode and 1600x1200 in TFT mode

VESA 1.1 and 2.0 VIP/VDA support

Connector External DB15 female connector on rear I/O panel

Onboard 30-pin LVDS connector

Ethernet Interface

Controller 1 x Realtek RTL8110S-32 Gigabit Ethernet controller

Type Triple speed 10/100/1000Base-T

Auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Connector One External RJ45 connector with LED on rear I/O panel

Audio Interface

Chipset Realtek ® ALC203 AC97 Audio compliance

Interface 2 channels sound output

LE-366 User’s Manual

-8-

Connector External Audio phone jack for Line-out and MIC-in.

Onboard audio connector with pin header

Expansive Interface

PCI 1 Mini-PCI slot V2.2 33/66 MHz

1 Compact Flash (optional)

Power and Environment

Power Requirement 12V DC Jack power connector

Temperature Operating temperature with 0℃~60℃(32℉~ 140℉)

Storage temperature with 20℃~ 80℃(-68℉~ 176℉)

Ordering Code

LE-366 AMD LX800 processor Mini-ITX with onboard VGA, GigaLAN,

RS232, USB2.0, Audio, LCD and DDR DIMM

The specifications may be different as the actual production.

For further product information please visit the website at TUhttp://www.commell.com.twUT

LE-366 User’s Manual

-9-

1.3 <Mechanical Drawing>

‘

Other manuals for Geode LX 800

This manual suits for next models

Table of contents

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

Advantech

Advantech ASMB-935 Series user manual