Amarey A800 User manual
A800 ROBOT VACUUM CLEANER
Owner’s Guide
Thank you for purchasing our amarey Robot Vacuum Cleaner. And welcome to amarey Robotic Family.
If you have any problems, please don’t hesitate to contact our amarey Customer Service Center by email . You can also subscribe on
website (https://www.iamarey.com) to get the latest information for new amarey Robot Vacuum Cleaner.
Meet our amarey A800 Robot
Life can be so easy with amarey.
Table of Contents
Important Safety Instructions·················· 02
About amarey A800 Robot ····················· 03
Regular amarey A800 Care···················· 13
Troubleshooting·······································15
Specifications··········································17
amarey Customer Care ························· 17
Using amarey A800 Robot ····················· 07
Important Safety Instructions
Read all instructions before operating Robot. Save these instructions for future reference.
• If you have special objects that could potentially be damaged by the bumping, remove these objects from the floor.
• Do not let kids sit or stand on Robot. Children and pets should be supervised when Robot is operating.
• Do not make Robot for outdoor use.
• Do not clean wet messes with your Robot.
• Do not use Robot to pick up spills of water bleach, paint, other chemicals.
• Do not expose Robot to freezing temperatures .
• Do not use Robot to pick up flammable or combustible materials such as gasoline, printer, etc.
• Ensure that Robot cannot get caught on clothing, socks, pull cords for blinds or curtains, power cords, etc.
• If the power cord is damaged, do not use any other power supply cord. For replacement cords, please contact amarey Customer Service Team.
• Only charge one of the following amarey batteries: maximum 14.4V, 2600mAh Lithium-ion battery. Other type of batteries may burst causing injury. Always
contact amarey Customer Service Team for the correct replacement of battery.
• Always remove the battery from Robot and accessories before long-term storage or transportation.
• The battery must be removed before Robot is disposed. Remove Robot's two Battery Door's screws, and then remove the battery by disconnecting the
quick connector.
• Contact your local waste management authority for battery recycling and disposal regulations in your area.
• WARNING Fire or Explosion Hazard: Do not crush or dismantle battery packs. Do not heat or place the battery pack near any heat source or direct
sunlight. Do not incinerate or short-circuit the battery pack. Do not subject batteries to mechanical shock.
Lithium-ion Battery
Battery Storage
Battery and Charging / Information
Important: Lithium-ion batteries and products that contain Lithium-ion are subject to stringent transportation regulations. If you need to ship this
product (with the battery included）for service, travel or any other reason, you MUST comply with the following shipping instructions:
• Remove the Lithium-ion battery from the product.
• Place a piece of tape over the battery's metal charging contacts.
• Reinstall the battery (with the tape on it) in the product and secure the battery door.
• Package the product in its original packaging or in your own packaging that prevents any movement during transportation.
• Ship via ground transportation only (no air shipping).
•
If storing Robot off the Charging Dock, remove the battery first. Then store Robot and the battery in a cool, dry place.
• WARNING Chemical Exposure: If the battery pack is leaking, do not allow the liquid to come in contact with skin or eyes. If contact has been made,
wash the affected area with copious amounts of water and seek medical advice. Place the battery (the used battery pack included when the robot will be
disposed) in a sealed plastic bag and dispose of safely according to local environmental regulation.
02
About amarey A800 Robot
1.1 Robot
Dock Button
To send A800 Robot back to the Charging
Dock, press on Robot or press on the
Remote Control.
Press and hold on to Power On or Power Off
Press to start or stop Cleaning
WHAT IT MEANLED COLOR
Blinking pink Charging
Solid blue Standby / Cleaning / Fully charged
Solid pink Low power and returning to Charging Dock
Off Robot is off or conserve power, the light automatically turns off when
Robot is not docked to the Charging Dock and has been inactive for 1
minute
Flashing / Solid red + Beeping Robot has an error. Refer to the “Troubleshooting>Error Tone” section
in this guide for solutions
Power On / Power Off / Cleaning
LED Light
03
Anti-collision Sensors
Bin Release Button
Charging Contact Points
Anti-drop Sensors
Wheels
Dust Bin
Swivel Wheel
Side Brushes
Battery Door
Rolling Brush
ON
OFF
Main Power Switch (On/Off) Brush Guard
04
1.2 Accessories
Charging Dock Adapter Remote Control
Dust Bin
Cleaning Tool
4 x Side Brushes
Sponge Filter and HEPA Filter
Rolling Brush
1.3 Charging Dock
05
Charging Indicator
Charging Contact Points
Signal Transmission Area
Auto Cleaning
Control Cleaning Direction
and Adjust time
Time Setup
Spot Cleaning
Single Room Cleaning
Mode and Time Display Screen
Return to Charging Dock
Start / Stop
Schedule Setup
Edge Cleaning
Max Suction in Single Room
& Auto Cleaning Mode
Notice: Install 2 AAA batteries before using the remote control for the first time. Ensure the positive and negative ends are facing the correct
polarity direction as marked in the battery compartment. Please aim the Remote Control directly at the Robot within 5m/16ft when pressing.
06
2.1 Quick Start
Plug in the Charging Dock, and take the rest wire into the
trunking at the bottom of Charging Dock.
Using amarey A800 Robot
Notice: If you don't put the rest wire into the trunking, which may stuck Ro
bot while charging or cleaning.
1. Position the Charging Dock on a hard level surface and against a vwall.
• 3
feet
on both sides of the Charging Dock.
3. Connect the round connector of the adapter into the power socket on the Charging Dock and the other end into a wall outlet.
Notice: Please ensure the Charging Dock is plugged in, then Robot can automatically dock.
2. Ensure the place is
open & uncluttered area leaving at least:
•
6 feet in front of the Charging Dock.
Charging Dock’s Position
07
Attach Side Brushes to the bottom of Robot by pressing a brush into each slot until you
hear the voice "click”.
Turn on the Main Power Switch on the bottom of Robot.
Activate Robot Start Cleaning Cycle
Place Robot onto the Charging Dock, ensure the metal Cha
rging
Contacts Points on
the Charging Dock match up with those underneath
Robot.
Notice: If successful you will hear a “BEEP”.
Please charge your Robot for 4 hours at
least until the light turns blue, Robot is ready for use.
• Press the button to start a cleaning cycl
e (or press
the button on the Remote Control).
08
Table of contents
Other Amarey Vacuum Cleaner manuals
